MS3320-10

An enclosure which is designed to mount and protect one or more circuit breakers. It does not include the circuit breakers. It is designed for and may include a cover and accessories as mounting hardware, brackets, and conduit fittings. May include terminal boards and/or bus conductors used as a convenience for terminating the circuit breakers. For items which include circuit breakers, see circuit breaker box. For boxes not designed to mount and protect circuit breakers, see junction box.

mrap - rg-33; medium mine protected vehicle - mmpv end item identification, at pole one actuator position designation, single pole type body style, trip-reset actuator function, 0.781 inches maximum body length.

NSN 5925-00-431-3255 Datasheet

(NSN) National Stock Number

5925-00-431-3255

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-431-3255

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, May 8, 1970

Schedule B Code

8710000090

End Item Identification

mrap - rg-33; medium mine protected vehicle - mmpv

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Body Length

0.781 inches maximum

Body Style

single pole type

Body Width

0.593 inches maximum

Bushing Length

0.250 inches nominal

Center To Center Distance Between Terminals Parallel To Length

0.500 inches nominal

Circuit Protection Type

overcurrent single location

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 single location

Inclosure Protection Type For Which Designed

fungus resistant and vibration resistant and shock resistant and salt spray proof and dusttight and corrosion resistant and moisture resistant and explosion proof

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 push-pull

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

10.0 amperes ac and 10.0 amperes dc single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

5000.0 ac and 2500.0 dc single location

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.343 inches maximum

Nominal Thread Size

0.438 inches

Operating Voltage Type And Rating Per Pole In Volts

120.0 ac and 28.0 dc single location

Pole Quantity

1

Reset Method

manual

Specification/Standard Data

96906-ms3320 government standard

Storage Type

general purpose warehouse

Terminal Type And Quantity

2 tab w/screw

Test Data Document

"81349-mil-c-5809 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

un

Trip Release Ambient Temp Rating

25.0 celsius nominal single location

Trip Release Characteristic

time delay single location

Trip Release Method

thermal single location

Trip Delay Time In Seconds Per Rated Continuous Current

1.500 minimum at 200 pct and 40.000 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

138.0 single location

Unpackaged Unit Weight

0.055 pounds nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8710-00-0090

Description

parts of armored fighting vehicles,motorized, whether or not fitted with weapons

End Use

50030 - Military trucks, armored vehicles, etc.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

89111

(NAICS) North American Industrial Classification System

336992

Questions & Answers

1. What is the FSCG of the NSN 5925-00-431-3255?

   The FSCG of the NSN 5925-00-431-3255 is 5925

2. Does the NSN 5925-00-431-3255 have a Schedule B code assigned?

   Yes, the Schedule B code is 8710000090

3. Does NSN 5925-00-431-3255 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-431-3255 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-431-3255 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-431-3255 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, May 8, 1970