Worldwide distributor of NSN parts and consumables located in the USA.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE7L221T2935 | 2021-08-09 | DAM01 | 25 EA |
SPE7L221T1916 | 2021-03-22 | DAM01 | 31 EA |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Parts and accessories, for motor vehicles of headings 8701 to 8705, nesoi
Parts and accessories n.E.S. For tractors, motor cars and other motor vehicles, trucks, public-transport vehicles and road motor vehicles, n.E.S.
Other parts and accessories of vehicles
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICU - Precious metal content is unknown
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
000000 - No nmfc freight description
586 - Vehicle parts, other than automobile
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
Z - No rating
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $493.17 to $821.95.. | |
Does NSN 2510-00-174-3413 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, and Department Of The Navy | |
What is the NIIN of NSN 2510-00-174-3413? | |
001743413 or 00-174-3413 | |
Does NSN 2510-00-174-3413 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 2510-00-174-3413? | |
Solicitation SPE7L221T2935 for qty 25 on 08/04/2021 | |
When was this national stock number assigned to the federal catalog? | |
Feb 14, 1973 |
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: harmful or fatal if swallowed.
irritant when in contact with eyes or with open abraded skin.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: eye and skin irritation. May be fatal if
swallowed.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes or skin may be at
increased risk from exposure.
First aid: eyes: flush with running water for 15 minutes while holding
eyelids open. Get medical attention immediately. Skin: wash with
soap and water. Remove contaminated clothing. Get medical attention
if irri tation persists. Ingested: if conscious,induce vomiting.
give nothing by mouth to an unconscious victim. Get immediate
medical attention.
Hcc: f3
boiling pt: =100.C, 212.F
vapor pres: >1
vapor density: >1
spec gravity: 1.2
evaporation rate & reference:
solubility in water: negligible
appearance and odor: red, white, or blue. Mild odor
percent volatiles by volume:
Stability indicator/materials to avoid: no
strong oxidizing agents, strong acids, strong alkalies, reducing agents
and metal salts.
stability condition to avoid: temperatures above 105 f.
hazardous decomposition products: flammable gases. Can form explosive
mixture with air.
Waste disposal methods: disposal should be made by incineration in
accordance with all applicable federal, state and local
regulations. Caution: do not incinerate in closed containers.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: benzoyl peroxide (sara iii)
cas: 94-36-0
rtecs #: dm8579000
fraction by wt:
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3; 9192
ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt:
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: inorganic oxides
fraction by wt:
other rec limits: none specified
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: oral ld50 (rat) is 5000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: inhalation: acute: irritation to
respiratory tract. Chronic: may cause liver and kidney damage.
vapor or mists are extremely irritating to eyes, mucous membranes
and upper respiratory tract. Ingestion : may be harmful. Skin:
acute: may be absorbed through the skin in toxic amounts. Chronic:
may cause dermitis.
explanation of carcinogenicity: iarc has classified styrene as a
possible human carcinogen (class 2-b). This is based on new
classification scheme.
effects of overexposure: skin: may cause defatting, dryness with
irritation and possible dermatitis. Styrene may be absorbed through
the skin in toxic amounts. Eyes: may cause tearing and irritation.
inhalation: vapors may ca use nose, throat, and respiratory
tractirritation. May cause headache and nausea. Ingestion: gi
disturbances and pain.
medical cond aggravated by exposure: persons with a history of skin,
kidney or liver disorders may be at increased risk when using this
material.
First aid: eyes: flush with water for 15 minutes. Get medical attention.
skin: wash with soap and water. Inhalation: remove victim to fresh
air. If victim is unconscious, give artificial respiration or
oxygen as needed. Get medical attention. Ingestion: do not induce
vomiting (aspiration hazard). Get medical attention.
Hcc: f3
boiling pt: =146.1c, 295.F
vapor pres: 4.3
vapor density: >1
spec gravity: 1.56
evaporation rate & reference:
solubility in water: negligible
appearance and odor: fibrous thick putty, sharp odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents and strong acids.
stability condition to avoid: heat and direct sunlight
hazardous decomposition products: heating to decomposition may cause the
emission of irritating acrid fumes.
conditions to avoid polymerization: elevated temperatures, such as in
fire conditions.
Waste disposal methods: dispose of contaminated product and materials
used in cleaning up spills or leaks in accordance with all
applicable federal, state, and local regulations. Note: empty
containers can have residues subj ect to proper waste disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt:
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: unsaturated polyester resin
fraction by wt: >60%
other rec limits: none specified
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation: acute: mechanical
irritation of the mouth, nose and throat. Skin: acute: irritation
chronic: none. Eyes: acute irritation. Chronic: none ingestion:
unlikely to occur.
explanation of carcinogenicity: this product is not listed by iarc, ntp
or osha as a carcinogen, mutagen, teratogen or neurotoxin.
effects of overexposure: osha classifies fibrous glass as a nuisance
dust. May cause eye, skin & respiratory tract irritation.
medical cond aggravated by exposure: persons with a history of skin and
respiratory disorders may be at increased risk from exposure.
First aid: eye: immediately flush with plenty of water for 15 minutes.
get medical attention. Skin: wash with soap and water. Inhalation:
remove to fresh air. Drink water and blow nose to evacuate fibers.
Hcc: f3
melt/freeze pt: >700.C, ######f
spec gravity: 2.5
solubility in water: negligible
appearance and odor: white fabric or mat, no odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
none
Waste disposal methods: dispose of in sanitary landfill in accordance
with all applicable federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: fibrous glass
cas: 65997-17-3
fraction by wt: 100%
other rec limits: none specified
osha pel: 5 mg/m3 rdust z-3
acgih tlv: 10 mg/m3(
Ld50 lc50 mixture: ld 50 oral rat is 5000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: health hazards: acute: eye and skin
irritation and burns. chronic: respiratory tract irritation,
vertigo, blindness.
explanation of carcinogenicity: none of the ingredients in this product
is listed by ntp, iarc or osha as a carcinogen.
effects of overexposure: eyes: irritation, burns, blindness. Skin:
irritation, burns. Inhalation: respiratory tract irritation,
vertigo.
medical cond aggravated by exposure: individuals with a history of eye,
skin and respiratory disorders may be at increased risk from
exposure.
First aid: eyes: flush immediately (seconds count) with plenty of water
for at least 15 minutes. See doctor immediately. Skin: wash with
soap and water while removing contaminated clothing and shoes. If
skin is irritated, apply an ointment, such as lanolin. Inhalation:
remove victim to fresh air. Give oxygen/cpr if needed. See doctor.
Hcc: f3
boiling pt: b.P. Text: decomposes
vapor density: >1
spec gravity: 1.15
solubility in water: negligible
appearance and odor: clear liquid. Mild odor.
Stability indicator/materials to avoid: yes
metallic contamination, amines, organic metal salts.
stability condition to avoid: heat, sparks, open flames, direct
sunlight, static electricity, confinement under pressure.
hazardous decomposition products: carbon monoxide, carbon dioxide,
incompletely burned carbon products.
Waste disposal methods: contact your local environmental officer.
manufacturer recommends to ignite from a safe distance. Dispose of
in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone peroxide (mekp) (sara iii)
cas: 1338-23-4
rtecs #: el9480000
fraction by wt: 50%
other rec limits: none specified
osha pel: c 0.7 ppm
acgih tlv: c 0.2; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: dimethylphthalate (sara iii)
cas: 131-11-3
rtecs #: ti1575000
fraction by wt: 50%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3; 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: health hazards: acute: eye and
respiratory tract irritation. Extreme overexposure may result in
narcosis or deep anesthesia. Can defat and irritate skin. Chronic:
none specified by manufacturer.
explanation of carcinogenicity: styrene is listed by iarc as probably
carcinogenic to humans.
effects of overexposure: eyes: irritatation. Skin: irritation.
inhalation: respiratory tract irritation, narcosis, deep
anesthesia.
medical cond aggravated by exposure: individuals with a history of eye,
skin and respiratory disorders may be at increased risk from
exposure.
First aid: eyes: flush with plenty of water for at least 15 minutes.See
doctor. Skin: wash with soap and water while removing contaminated
clothing and shoes. Inhalation: remove victim to fresh air.Give
oxygen/cpr if needed.See doctor. Ingestion: do not induce
vomiting.See doctor immediately.
Hcc: f3
boiling pt: =145.C, 293.F
b.P. Text: styren
vapor density: >1
spec gravity: 1.8
appearance and odor: not specified by manufacturer.
Stability indicator/materials to avoid: yes
strong acids, peroxides.
stability condition to avoid: heat, open flames, sunlight and
contamination.
hazardous decomposition products: carbon monoxide, carbon dioxide, light
hydrocarbons, organic acids.
conditions to avoid polymerization: avoid exposure to heat or open
flame, contamination by oxidizing agents.
Waste disposal methods: contact your local environmental officer.
dispose of in accordance with all federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: styrene, monomer (sara iii)
cas: 100-42-5
rtecs #: wl3675000
fraction by wt: 13%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: s,50ppm/100stel;9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: unsaturated polyester resin
fraction by wt: 87%
other rec limits: none specified