NSN 2520-00-122-7537

An axle having two or more different diameters greater than 0.031 inches (0.79 millimeters) along its length. It must have one or more of the following conditions: a) a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), b) peripheral flat(s), c) circular groove(s), d) keyway(s), e) splines, f) threads, or g) holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion, see shaft (1) shoulder. For items not having any of the above conditions, see pin, shoulder, headless. Excludes:both shaft (1), straight and axle (1), straight.

2350008735408 end item identification, aluminum alloy,qq-a-250/11b,alloy 6061,t6,3.080 in. lg,0.750 in. dia,hole drilled longitudinal from one end,0.187 in. dia 1.190 in. deep general characteristics item description.

NSN 2520-00-122-7537 Datasheet

(NSN) National Stock Number

2520-00-122-7537

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2520 - Vehicular Power Transmission Components

(NIIN) National Item Identification Number

00-122-7537

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sat, Jul 13, 1974

Schedule B Code

8483909500

End Item Identification

2350008735408

General Characteristics Item Description

aluminum alloy,qq-a-250/11b,alloy 6061,t6,3.080 in. lg,0.750 in. dia,hole drilled longitudinal from one end,0.187 in. dia 1.190 in. deep

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1651461

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

64490

Water Commodity

581 - Automobile parts, new

National Motor Freight Classification Item Number

127220

Schedule B & Trade

Schedule B

8483-90-9500

Description

parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts

End Use

21180 - Industrial machines, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74890

(NAICS) North American Industrial Classification System

333613

Questions & Answers

1. What is the FSCG of the NSN 2520-00-122-7537?

   The FSCG of the NSN 2520-00-122-7537 is 2520

2. Does the NSN 2520-00-122-7537 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483909500

3. Does NSN 2520-00-122-7537 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2520-00-122-7537 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2520-00-122-7537 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2520-00-122-7537 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sat, Jul 13, 1974