Worldwide distributor of NSN parts and consumables located in the USA.
A vehicular item with a universal joint on one or both ends. For items with one universal joint, the opposite end may have a yoke, a yoke with a spider, or a shaft. For items without a universal joint see propeller shaft (as modified).
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts
Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc.
Industrial machines, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICU - Precious metal content is unknown
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
018540 - Auto driveshafts sub2
581 - Automobile parts, new
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
M - 85.0
S - 60.0
V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $7,255.46 to $12,092.44.. | |
Does NSN 2520-00-999-6465 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Navy, Republic Of Korea, and Turkey | |
What is the NIIN of NSN 2520-00-999-6465? | |
009996465 or 00-999-6465 | |
Does NSN 2520-00-999-6465 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 2520-00-999-6465? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Mar 09, 1966 |
Ld50 lc50 mixture: not known
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: no osha: no
health hazards acute and chronic: see signs and symptoms of
overexposure.
explanation of carcinogenicity: chromium & certain chromium
compounds: known human carcinogen (ntp,1991).
effects of overexposure: data suggest that no overexposure to casting
decomposition materials occur under normal conditions of
use.Welding/grinding on castings: conduct air sampling to confirm
control of dust/fumes below appli cable limits.
medical cond aggravated by exposure: not known
First aid: eyes: flush with large amounts of water for at least 15
minutes .
Boiling pt: b.P. Text: not known
melt/freeze pt: m.P/f.P text: 2050f,1121c
decomp temp: decomp text: not known
spec gravity: 7.2 (water=1)
appearance and odor: solid metallic casting.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: none
Waste disposal methods: disposal must be in accordance with
federal,state,and local regulations.Coordinate with supporting
installation and/or macom environmental office prior to disposal .
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phosphorous (yellow) (sara iii)
cas: 7723-14-0
rtecs #: th3500000
fraction by wt: 0.20%
other rec limits: not known
osha pel: 0.1 mg/m3
acgih tlv: 0.1 mg/m3
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: copper.Osha pel and acgih tlv 1 mg(cu)/m3 for dust and
mist. (sara iii)
cas: 7440-50-8
rtecs #: gl5325000
fraction by wt:
other rec limits: not known
osha pel: 0.1mg/m3 fume
acgih tlv: 0.2mg/m3 fume
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: chromium (sara iii)
cas: 7440-47-3
rtecs #: gb4200000
fraction by wt:
other rec limits: not known
osha pel: 1 mg(cr)/m3
acgih tlv: 0.5 mg(cr)/m3
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: manganese.Osha pel is for manganese compounds.(sara iii)
cas: 7439-96-5
rtecs #: oo9275000
fraction by wt:
other rec limits: not known
osha pel: (c) 5 mg/m3 dust
acgih tlv: 5 mg/m3 dust 9293
ingred name: iron.Osha pel for iron oxide dust & fume total
particulate.Acgih tlv for iron oxide fume.
cas: 7439-89-6
rtecs #: no4565500
fraction by wt: 91-96%
other rec limits: not known
osha pel: 10 mg(fe)/m3
acgih tlv: 5 mg(fe)/m3 fume
ingred name: magnesium.Osha pel 5 mg/m3 respirable fraction for mg oxide
fume.Acgih tlv for mg oxide fume.
cas: 7439-95-4
rtecs #: om2100000
fraction by wt: 0.07%
other rec limits: not known
osha pel: 10 mg/m3 total dust
acgih tlv: 10 mg/m3
ingred name: silicon.Osha pel 5 mg/m3 respirable fraction.Acgih tlv for
total dust containing no asbestos &
cas: 7440-21-3
rtecs #: vw0400000
fraction by wt: 1.0-2.7%
other rec limits: not known
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: carbon.Osha pels for synthetic graphite.Osha pel 5 mg/m3
resp fraction.Acgih tlv for graphite (all forms except fibers).
cas: 7440-44-0
rtecs #: ff5250100
fraction by wt: 2.0-3.9%
other rec limits: not known
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293
ingred name: sulfur
cas: 7704-34-9
rtecs #: ws4250000
fraction by wt:
other rec limits: not known
osha pel: not known
acgih tlv: not known
Ld50 lc50 mixture: ld50 rat oral >5 g/kg,rabbit (see supp)
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: high vapor concentrations (>1000 ppm)
may cause death.Prolonged or repeated skin contact may lead to
dermatitis.Minute amounts aspirated into lungs during ingestion or
vomiting may cause death.
explanation of carcinogenicity: none
effects of overexposure: eyes: liquid/vapor may cause irritation.
skin: prolonged or repeated contact removes skin oils,leading to
irritation. Ingestion: low toxicity.Aspir of minute amount may cause
mild to severe pulmonary inj ury. Inhal: vapor conc >1000 ppm
irritates resp tract with
headache,dizziness,anesthesia,drowsiness,uncon,cns effects.
medical cond aggravated by exposure: skin contact with petroleum
solvents/petroleum hydrocarbons may aggravate an existing
dermatitis.
First aid: eyes: flush w/ lots of water for at least 15 min or until
irrit subsides.If irrit persists,call md. Skin: remove contam
clthg.Use waterless hand cleaner,then wash w/ soap & water.If prod
injected into/u nder skin see md immed as surgical emergency.
ingest: do not induce vomiting.Call md immed. Inhal: remove from
exposure.Call md immed.If brthg irregular or stops,start
resuscitation,admin o*2 if avail.
Boiling pt: b.P. Text: 313-396f
melt/freeze pt: m.P/f.P text: see supp
decomp temp: decomp text: not known
vapor pres: see supp
vapor density: 4.8,air=1
spec gravity: see supp
ph: 7.0
evaporation rate & reference: see supp data
solubility in water: negligible (
appearance and odor: clear,amber colored liquid with mild mineral
spirits odor.
percent volatiles by volume: 93
Stability indicator/materials to avoid: yes
contact w/ strong oxidants such as liquid chlorine,concentrated
oxygen,sodium hypochlorite,calcium hypochlorite,etc.
stability condition to avoid: not known
hazardous decomposition products: fumes,smoke,carbon monoxide,aldehydes
and other decomposition products.
conditions to avoid polymerization: will not occur.
Waste disposal methods: disp must be iaw fed,state,& local
regs.Coordinate w/ supporting installation/macom environ office
prior to disp .Completely drain,properly bunge & promptly return
empty drums to drum reconditio ner.Disp all other contrs in environ
safe manner.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 1,2,4-trimethylbenzene (sara iii)
cas: 95-63-6
rtecs #: dc3325000
fraction by wt: 2.5%
other rec limits: not known
osha pel: 25 ppm
acgih tlv: 25 ppm
ingred name: mineral spirits (vm & p naphtha)
cas: 8032-32-4
rtecs #: oi6180000
fraction by wt: 92%
other rec limits: not known
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: proprietary additives
fraction by wt: 8%
other rec limits: not known
osha pel: not known
acgih tlv: not known
Ld50 lc50 mixture: ld50 rabbit dermal >2 g/kg,rat (see sup)
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: see signs and symptoms of
overexposure.
explanation of carcinogenicity: none
effects of overexposure: eyes/skin: no significant irritation expected.
ingestion: expected to be relatively non-toxic. Inhalation: none
expected under normal conditions of use.
medical cond aggravated by exposure: not known
First aid: eyes: flush with large amounts of water for at least 15
minutes . Ingestion: if a large amount is swallowed,induce
vomiting.Get medical attention.
Boiling pt: b.P. Text: not known
melt/freeze pt: m.P/f.P text: see supp
decomp temp: decomp text: not known
vapor pres: not known
vapor density: not known
spec gravity: not known
evaporation rate & reference: not known
solubility in water: negligible (
appearance and odor: smooth textured grease with green color.
Stability indicator/materials to avoid: yes
none identified
stability condition to avoid: not known
hazardous decomposition products: incomplete burning can produce carbon
monoxide and/or carbon dioxide and other harmful products.
conditions to avoid polymerization: will not occur.
Waste disposal methods: disposal must be iaw federal,state,and local
regulations.Coordinate with supporting installation/macom
environmental office prior to disposal .Enclosed-controlled
incineration recommended unless directed otherwise by applicable
ordinances.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrofinished solvent refined paraffinic petroleum oil.Osha
pel and acgih tlv are for oil mist,mineral.
cas: 64742-54-7
rtecs #: py8035501
other rec limits: not knonwn
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3
ingred name: organic polyurea thickener
other rec limits: not known
osha pel: not known
acgih tlv: not known
Ld50 lc50 mixture: not known
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: see signs and symptoms of
overexposure.
explanation of carcinogenicity: none
effects of overexposure: eyes/inhalation: dust may cause irritation of
the eyes,nose,or throat,leave a metallic taste in the mouth.
medical cond aggravated by exposure: not known
First aid: eyes: flush with large amounts of water for at least 15
minutes .Inhalation: remove to fresh air,administer oxygen,and seek
assistance of physician.
Boiling pt: b.P. Text: not known
melt/freeze pt: m.P/f.P text: see supp
decomp temp: decomp text: not known
spec gravity: >7.0 (water=1)
solubility in water: negligible
appearance and odor: grayish to silvery,odorless sheet,strip,plate,bar
or structural shapes.
Stability indicator/materials to avoid: yes
none
stability condition to avoid: elevated temperatures
hazardous decomposition products: at elevated temperatures may liberate
metal fumes,metal oxides,or other oxides.
Waste disposal methods: disposal must be in accordance with
federal,state,and local regulations.Coordinate with supporting
installation and/or macom environmental office prior to disposal
.Reclaim for reuse.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: steel
other rec limits: not known
osha pel: not known
acgih tlv: not known