Worldwide distributor of NSN parts and consumables located in the USA.
A coated or uncoated filler metal or an uncoated nonfiller material in wire or solid rod form. It is used in welding where the fusing or melting heat is supplied through the medium of an electric arc wherein the rod serves as carrier of the electric current. For a collection of welding electrodes, see welding electrode set. Excludes electrode, cutting, solid.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Coated electrodes of base metal, for electric arc-welding
Wire, rods, electrodes, etc., of base metal or of metal carbides, flux coated for soldering, etc, ; agglomerated base metal powder for metal spraying
Finished metal shapes
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.
197060 - Welding bars/rods/wire
746 - Welding equipment and soldering supplies
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
U - 50.0
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $32.40 to $54.00.. | |
Does NSN 3439-00-460-7632 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Navy | |
What is the NIIN of NSN 3439-00-460-7632? | |
004607632 or 00-460-7632 | |
Does NSN 3439-00-460-7632 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 3439-00-460-7632? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 14, 1970 |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: fumes and gases can be dangerous to
your health. Acute: short-term overexposure to welding fumes may
result in discomfort such as dizziness, nausea or dryness or
irritation of nose, throat or eyes. Chr onic: long-term overexposure
to welding fumes can lead to siderosis (iron products in lungs),
cns (efts of overexp)
explanation of carcinogenicity: nickel: iarc monographs, vol 49, pg 257,
1990: grp 2b. Ntp 7th annual rpt on carcins, 1994: antic to be
carcin. (supdat)
effects of overexposure: hlth haz: damage, sensitization dermatitis and
believed by some investigators to affect pulmonary function. Arc
rays can injure eyes and burn skin. Electric shock can kill.
note: chromium is listed in n tp annual rpt on carcins & found to be
potntl carcin in iarc monographs & listed by osha/acgih as potntl
carcin (mfr).
medical cond aggravated by exposure: aggravation of respiratory or
allergic conditions may affect some exposed individuals.
First aid: remove from exposure & call for medical aid. Employ first aid
techniques recommended by the american red cross. Ingest: call md
immediately . Inhal: remove to fresh air. Support breathing (give o*
2/artf resp) . Eyes: immediately flush w/potable water for a minimum
of 15 minutes, seek assistance from md . Skin: flush w/copious
amounts of water. Call md .
Appearance and odor: chrome-nickel coated electrodes are welding
consumables consisting of a (supdat
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: welding fumes & gases cannot be
classifed simply. Composition & qty of both are dependent upon
metal being (ing 16)
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposable container or
liner in an environmentally accepted manner, in full compliance
w/federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: calcium carbonate (caco*3)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 1-10%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: calcium fluoride (caf*2) (as f)
cas: 7789-75-5
rtecs #: ew1760000
fraction by wt: 1-10%
osha pel: 2.5 mg/m3 (f) (mfr)
acgih tlv: 2.5 mg/m3 (f) (mfr)
ingred name: chromium (cr) (sara 313) (cercla)
cas: 7440-47-3
rtecs #: gb4200000
fraction by wt: 5-30%
osha pel: 1 mg/m3
acgih tlv: 0.5 mg/m3
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: copper (cu) (sara 313) (cercla)
cas: 7440-50-8
rtecs #: gl5325000
fraction by wt: 3-4%
osha pel: 0.1mg/m3 fume;1 dust
acgih tlv: 0.2 mg/m3 fume
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: iron (fe)
cas: 7439-89-6
rtecs #: no4565500
fraction by wt: balance
osha pel: 10 mg/m3 (mfr)
acgih tlv: 5 mg/m3 (mfr)
ingred name: manganese (mn) (sara 313)
cas: 7439-96-5
rtecs #: oo9275000
fraction by wt: 1-10%
osha pel: 5 mg/m3 dust, c
acgih tlv: 5 mg/m3 dust
ingred name: molybdenum (mo)
cas: 7439-98-7
rtecs #: qa4680000
fraction by wt: 1-10%
osha pel: 10 ppm
acgih tlv: 10 ppm
ingred name: nickel (ni) (sara 313) (cercla)
cas: 7440-02-0
rtecs #: qr5950000
fraction by wt: 1-35%
osha pel: 1 mg/m3
acgih tlv: 1 mg/m3
ingred name: niobium (nb) (also called columbium)
cas: 7440-03-1
fraction by wt: 1-10%
osha pel: n/k
acgih tlv: n/k
ingred name: potassium, metal; (potassium) (k)
cas: 7440-09-7
rtecs #: ts6460000
fraction by wt: 1-10%
osha pel: n/k
acgih tlv: n/k
ingred name: sodium (na) (cercla)
cas: 7440-23-5
rtecs #: vy0686000
fraction by wt: 1-10%
osha pel: n/k
acgih tlv: n/k
ingred name: silicon (si)
cas: 7440-21-3
rtecs #: vw0400000
fraction by wt: 1-10%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: cryolite; (sodium aluminum fluoride) (na*3alf*2)
cas: 15096-52-3
rtecs #: wa9625000
fraction by wt: 1-10%
osha pel: 2.5 mg/m3 (f) (mfr)
acgih tlv: 2.5 mg/m3 (f) (mfr)
ingred name: titanium oxide; (titanium dioxide) (tio*2)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 1-20%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: supp data: this may include arm protectors, aprons, hats,
shoulder protection & dark substantial clothing.
rtecs #: 9999999zz
ingred name: haz decomp prod: welded, & process, procs & electrodes used.
when electrode is consumed, fume & gas decomp prods (ing 17)
rtecs #: 9999999zz
ingred name: ing 16: generated are diff in percent & form than ings
listed. Decomp prods of normal operation include those (ing 18)
rtecs #: 9999999zz
ingred name: ing 17: originating from volatilization rxn/oxidation of
matls shown in ings section plus those from base metal &(ing 19)
rtecs #: 9999999zz
ingred name: ing 18: coating, etc, as noted. One rec way to determine
composition & qty of fumes & gases to which workers are (ing 20)
rtecs #: 9999999zz
ingred name: ing 19: expos is to take an air sample inside welder's
helmet if worn/in worker's brthg zone. Individual fume (ing 21)
rtecs #: 9999999zz
ingred name: ing 20: constituents for gases likely to be present are as
follows: carbon dioxide, carbon monoxide, dinitrogen (ing 22)
rtecs #: 9999999zz
ingred name: ing 21: tetroxide, hydrogen fluoride, nitric oxide, nitrogen
dioxide, ozone, phosgene (may result from cont w/ (ing 23)
rtecs #: 9999999zz
ingred name: ing 22: chlorinated hydrocarbon vaps), phosphine (may rslt
from welding on phosphate coated steels). Individual (ing 24)
rtecs #: 9999999zz
ingred name: ing 23: fume constituents for solids likely to be present
are as follows: calcium fluoride, chromates, copper, (ing 25)
rtecs #: 9999999zz
ingred name: ing 24: manganese, nickel, silicon oxide. For more specific
info regarding hazardous decomp products contact nehc .
rtecs #: 9999999zz