Request Pricing & Availability

NSN: 5315-00-001-5335
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

NSN 5315-00-001-5335 Headless Straight Pin

Manufacturer Part Numbers

Part Number Name Cage Code
35613 Pin,straight,headless 94697

Management Codes

CTL: ------- (MOE: DS)
AAC: Terminal item # (non-stocked items). future procurement is not authorized. no wholesale stock is available for issue. 1. requisitions will not be processed to the wholesale manager. 2. internal service/agency requisitioning may be continued
QUP: 1
SLC: 0

Freight Codes

NMF Desc: Hardware, Noi
NMFC: 095190
UFC: 49790
LTL: Rating variable
LCL: 70.0
WCC: Metal hardware
TCC: No special type of cargo code applicable
SHC: Other or no special handling required (sh)
ADC: Shipment is not a consolidation and does not exceed 84 inches in any dimension.
ACC: Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ASH: No special handling required.


DEMIL Integ:
ESD: )
Schedule B: 7319409000 – Pins of iron or steel nesoi
NIIN: 000015335

5315-00-001-5335 Datasheet

Distance From Centerline Of Hole To End Of Pin: 0.050 inches nominal
Center To Center Distance Between Holes: 0.460 inches minimum and 0.470 inches maximum
First Hole Diameter: 0.045 inches minimum and 0.050 inches maximum
First End Style: Chamfered
First End Taper Angle: 45.0 degrees nominal
First End Taper Length: 0.020 inches nominal
Hardness Rating: 40.0 rockwell c minimum overall and 45.0 rockwell c maximum overall
Hole Arrangement Style: Both end drilled
Material Document And Classification: Qq-s-764,type 416 fed spec single material response overall
Material: Steel comp 416 overall
Second End Relationship With First End: Identical
Second Hole Diameter: 0.045 inches minimum and 0.050 inches maximum
Pin Overall Length: 0.570 inches minimum and 0.580 inches maximum
Pin Overall Diameter: 0.1970 inches minimum and 0.1972 inches maximum
Surface Finish: 125.0 microinches both ends
Surface Finish: 16.0 microinches outside diameter
Surface Treatment Document And Classification: Wps10012,79294 mfr ref single treatment response overall
Surface Treatment: Passivate overall

Questions & Answers

What are the historical prices recorded for this stock number?
No pre-dated pricing for this NSN could be found.
What NATO entities are users of this NSN?
No recorded entities for this stock number.
How is national stock number 5315-00-001-5335 categorized?
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod, straight, headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin, straight, threaded.
Does this item require Demilitarization?
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9).
Is this item ITAR controlled?
No. This item is not ITAR Controlled.
When was this national stock number assigned to the federal catalog?
Sep 27, 1972