Plate Spacer

SKU: 5365000260481 | Model: 224134
NSN 5365-00-026-0481 NSN 5365-00-026-0481

0.339" hole diameter, 1.545" length, 0.500" width, 0.095" thickness, 0.954" center to center distance between bolt holes along length

Specifications from the Manufacturer

Hole Diameter:
0.339 inches minimum and 0.349 inches maximum
Overall Length:
1.545 inches minimum and 1.565 inches maximum
Overall Width:
0.500 inches minimum and 0.520 inches maximum
Overall Thickness:
0.095 inches minimum and 0.105 inches maximum
Center To Center Distance Between Bolt Holes Along Length:
0.954 inches nominal
Outside Edge To Bolt Hole Center Distance Along Length:
0.300 inches nominal
Bolt Hole Centerline To Nearest Edge Distance:
0.230 inches nominal
Bolt Hole Quantity:
Hardness Rating:
26.0 rockwell c minimum and 32.0 rockwell c maximum
Steel comp 8630
Material Document And Classification:
Ams 6355 assn std single material response
Surface Treatment:
Surface Treatment Document And Classification:
Ams 2400 mil spec single treatment response
Style Designator:
Non-circular w/square corners

Pricing and Availability

Request a Quote

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.


Order With Confidence

Certified quality parts supplier
  • MSDS Hazmat Certified
  • certified Committed to quality with 100% product inspection
  • on time delivery icon On-time delivery
More in Bushings, Rings, Shims, And Spacers

NSN 5365-00-026-0481 Datasheet

Supply Class:


Cross Reference:

  • 224134

Cage Codes:

  • United Technologies Corporation (CAGE 77445)

Replaced or Cancelled:

5365-00-026-0481 is not a replacement of any national stock number and has not been cancelled or replaced itself.


NIIN: 000260481
NSN: 5365000260481
DEMIL Code Meaning: Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations.
ADPE: 0 (Represents items with no adp components)

Freight Codes:

NMF Desc: Washers/gaskets/pckg Dvcs Noi
NMFC: 194120
UFC: 95100
LTL: Rating variable
WCC: Gaskets, (machinery and parts),(less than 35 feet)
TCC: No special type of cargo code applicable
SHC: Other or no special handling required (sh)
ADC: Shipment is not a consolidation and does not exceed 84 inches in any dimension.
ACC: Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ASH: No special handling required.

Management Codes:

AAC: Terminal item. identifies items in stock, but future procurement is not authorized. requisitions may continue to be submitted until stocks are exhausted. preferred item national stock number is normally provided by application of the phrase: when exh
QUP: 1
SLC: 0

Reference Drawing:

[drawing of 5365-00-026-0481]

Schedule B & Trade:

Other articles of iron or steel not wire nesoi

Questions & Answers:

What are the historical prices recorded for this stock number?
No pre-dated pricing for this NSN could be found.
Does NSN 5365-00-026-0481 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
No recorded entities for this stock number.
How is national stock number 5365-00-026-0481 defined?
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
What is the NIIN of NSN 5365-00-026-0481?
000260481 or 00-026-0481
Does this item require Demilitarization?
Non-usml/non-ccli - no demil or dod tsc required. department of commerce may impose licensing requirements to certain destinations. (note 9).
Is NSN 5365000260481 ITAR controlled?
No. This item is not ITAR Controlled.
What is the most recent solicitation for NSN 5365000260481?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 01, 1963