NSN 5910-01-059-7485

An item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. Includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. Excludes:items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. See also clip, electrical; clamp, electrical; brush, electrical contact; plug, tip; and jack, tip.

w/o mtg facilities terminal(s) on one surface body style, 0.190 inches nominal body length, 0.190 inches nominal body width, 39.000 picofarads single section capacitance value per section, 0.090 inches nominal body height.

NSN 5910-01-059-7485 Datasheet

(NSN) National Stock Number

5910-01-059-7485

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-059-7485

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Sat, Apr 15, 1978

Schedule B Code

8532290040

Body Height

0.090 inches nominal

Body Length

0.190 inches nominal

Body Width

0.190 inches nominal

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

39.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.200 inches nominal

Dissipation Factor At Reference Temp In Percent

2.5000

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Failure Rate Level In Percent

0.1000

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.025 inches nominal

Terminal Length

1.250 inches minimum

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39014/1 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Voltage Temp Limits Per Section In Percent Capacitance Change

-15.0 to 15.0 without voltage applied single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

F4U - Ogden air logistics center 5851 f ave hill afb ut 84056-5713

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-059-7485?

   The FSCG of the NSN 5910-01-059-7485 is 5910

2. Does the NSN 5910-01-059-7485 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-059-7485 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-059-7485 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-059-7485 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-059-7485 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Sat, Apr 15, 1978