NSN 5930-00-059-2739

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2.0 amperes resistive load dc at sea level contact load current rating, 3 individual section quantity, 1.500 inches nominal single mounting facility distance between mounting facility centers, 28.0 dc at sea level contact voltage rating in volts, breaks before makes each section periphery contact switching action.

NSN 5930-00-059-2739 Datasheet

(NSN) National Stock Number

5930-00-059-2739

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-059-2739

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jun 6, 1967

Schedule B Code

8536509020

Contact Load Current Rating

2.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes each section periphery

Contact Voltage Rating In Volts

28.0 dc at sea level

Distance Between Mounting Facility Centers

1.500 inches nominal single mounting facility

Individual Section Quantity

3

Mounting Facility Pattern

two position in-line single mounting facility

Mounting Method

threaded hole(s) single mounting facility

Nominal Thread Size

0.164 inches single mounting facility

Overall Height

2.250 inches nominal

Overall Length

4.938 inches nominal

Overall Width

2.250 inches nominal

Pole Quantity

2 each section periphery

Precious Material And Location

contacts silver

Precious Material

silver

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round single actuator

Shaft Length

0.938 inches nominal single actuator

Style Designator

tap, square frame

Switch Actuator Indexing Position Quantity

7 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

turret

Thread Class

2b single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

7 each section periphery

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

94135

Naval Ordnance Standards

Military standards and standards organizations (ex:stanags,milspecs,defstans)

28057

Shallco, Inc

U.s./canadian manufacturers

58880

Meggitt (new Hampshire), Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-059-2739?

   The FSCG of the NSN 5930-00-059-2739 is 5930

2. Does the NSN 5930-00-059-2739 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-059-2739 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-059-2739 contain precious materials?

   Item contains silver.

5. Does NSN 5930-00-059-2739 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-059-2739 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Tue, Jun 6, 1967