NSN 6525-01-059-1798

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6525-01-059-1798, no name available.

NSN 6525-01-059-1798 Datasheet

(NSN) National Stock Number

6525-01-059-1798

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6525 - Veterinary Dental Imaging Equipment and Supplies: Medical

(NIIN) National Item Identification Number

01-059-1798

Requires Demilitarization

Yes

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9M - Defense supply center philadelphia directorate of medical materiel philadelphia, pennsylvania 19111

Questions & Answers

1. What is the FSCG of the NSN 6525-01-059-1798?

   The FSCG of the NSN 6525-01-059-1798 is 6525

2. Does NSN 6525-01-059-1798 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

3. Does NSN 6525-01-059-1798 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6525-01-059-1798 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.