Worldwide distributor of NSN parts and consumables located in the USA.
A mixture of silicone compound and an inert substance such as silica, used to prevent or suppress foam in a wide variety of aqueous and nonaqueous systems. for compounds without silicone see antifoam compound, silicone free.
The last inventory check on this NSN was done on 02/23/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
050140 - Compounds defoaming
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $753.71 to $1,256.18.. | |
Does NSN 6850-00-950-6489 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, and Republic Of Korea | |
What is the NIIN of NSN 6850-00-950-6489? | |
009506489 or 00-950-6489 | |
Does NSN 6850-00-950-6489 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 6850-00-950-6489? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
May 27, 1966 |
Effects of overexposure: eye slight irrt
First aid: inhal: rmv to fresh air. If not brthng give cpr; if brthng
diff give oxygen. Eye: immed flush w/plenty of water. Skin: wash
w/soap&water. Rmv contam clthg&shoes. Ingest: induce vomit. Rpt
until vomit is c lear. Nothg by mouth if unconsc. Get medical attn.
Hcc: n1
boiling pt: b.P. Text: 212f/100c
vapor pres: 24
spec gravity: 1.01
evaporation rate & reference: 1 (water=1)
solubility in water: appreciable
appearance and odor: white liquid, sorbic acid odor
percent volatiles by volume: 86
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
hazardous decomposition products: >500f: co*2,sio*2
Waste disposal methods: not hazardsou as waste. Reclaim or incinerate
>500 iaw all laws & regs
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethyl polysiloxane emulsion
fraction by wt: 100%
Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: n1
boiling pt: b.P. Text: 212f/100c
vapor pres: 17
vapor density: 0.6
spec gravity: 1.0
solubility in water: complete
appearance and odor: white liquid
percent volatiles by volume: 90%
Stability indicator/materials to avoid: yes
none
hazardous decomposition products: not known
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone compound
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
Effects of overexposure: product is not harmful under normal plant
conditions.
First aid: wash skin with soap & water.Wash eyes with water only.
Hcc: n1
boiling pt: b.P. Text: 212 f
spec gravity: 1.0
solubility in water: complete
appearance and odor: milk white liquid-slight sweet odor
percent volatiles by volume: 85
Stability indicator/materials to avoid: yes
high caustic or acid solution.
hazardous decomposition products: none
Waste disposal methods: dispose of in approved landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone
ingred name: soap
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none specified by manufacturer.
explanation of carcinogenicity: this product does not contain
carcinogens.
effects of overexposure: may cause mild irritation of eyes or skin on
prolonged or repeated contact.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhale: remove to fresh air, give cpr/oxygen if need.
eyes/skin: flush with large amounts of water for 15 min. Ingest:
rinse mouth. Get medical attention for eyes, breathing difficulty,
or other sympt oms of overexposure.
Hcc: n1
boiling pt: b.P. Text: >212f/100c
vapor pres:
vapor density: >1.0
spec gravity: 1.0
evaporation rate & reference:
solubility in water: dispersible
appearance and odor: milky-white liquid; mild odor
Stability indicator/materials to avoid: yes
none noted
stability condition to avoid: heat, open flames.
hazardous decomposition products: burning can produce carbon monoxide,
carbon dioxide, oxides of silicone.
Waste disposal methods: collected material may be disposed of in
accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethyl siloxane emulsion
fraction by wt:
other rec limits: not specified
ingred name: additives (proprietary composition)
fraction by wt: >1.0%
other rec limits: not specified
Effects of overexposure: temporary discomfort to eyes.
First aid: flush with water.
Hcc: n1
boiling pt: b.P. Text: 212f
vapor pres: 30
spec gravity: 1.0
evaporation rate & reference:
solubility in water: appreciable
appearance and odor: very little odor- liquid, white color.
percent volatiles by volume: >80
Stability indicator/materials to avoid: yes
oxidizing materials can cause reaction.
hazardous decomposition products: silicon dioxide,carbon
dioxide,incomplete.Burned carbon prod
Waste disposal methods: landfill and incineration. All local, state, and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredients
fraction by wt: 100%
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: this product is generally considered
to be inert and non-hazardous.
explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: this product is generally considered to be
inert and non-hazardous.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhale- paste. Not likely, but, if it should occur, call
physician. Skin- wash with soap and a large volume of water. Remove
clothing in affected area. Eye- flush thoroughly for at least 15
mins. With large volumes of water . Irritation does not involve
cornea and should subside within several hours.
Hcc: n1
boiling pt: b.P. Text: 212f,100c
vapor pres: 17
vapor density: 0.6
spec gravity: 1.0
solubility in water: complete
appearance and odor: white liquid
percent volatiles by volume: 90
Stability indicator/materials to avoid: yes
materials that react with water.
stability condition to avoid: none
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: dispose of in accordance with all applicable
federal, state and local laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no hazard ingredients stated by manufacturers
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-direct contact may cause temporary
discomfort. Skin-a single prolonged exposure causes no known
adverse effects. Inhalation-no irritation to eyes & respiratory
passages. Oral-small amounts transfe red to the mouth by fingers
during use,should not injure.
explanation of carcinogenicity: not relevant.
effects of overexposure: eye-mild redness and dryness similiar to
windburn. Oral-swallowing large amounts may cause digestive
discomfort.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye-immediately flush with water. Skin-no first aid should be
needed. Inhalation-no first aid should be needed. Oral-no first aid
should be needed. Comments-treat symptomatically.
Hcc: n1
spec gravity: 1.00 @ 25c
viscosity: 200 cst
solubility in water: none
appearance and odor: liquid, white.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: none.
hazardous decomposition products: silicon dioxide. Carbon oxides &
traces of incompletely burned carbon cmpds. Metal oxides.
formaldehyde.
Waste disposal methods: disposal of collected product, residues, &
cleanup materials may be governmentally regulated. Observe all
applic local, state, and federal waste management regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrogenated tallow glycerides
cas: 68308-54-3
fraction by wt: 1%
other rec limits: none recommended
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eye/skin: no evidence of harmful
effects from available information. Inhalation: short term health
effects are not expected from vapor generated at ambient
temperature. Ingestion: no evidence of ha rmful effects from
available information. Chronic-no adverse effects anticipated from
available information.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis found no listing & does not expect it to be
carcinogenic.
effects of overexposure: mfr gave no information on msds. See health
hazards.
medical cond aggravated by exposure: overexposure is unlikely to
aggravate existing medical conditions.
First aid: eye: flush w/water for 15 min. Skin: wash w/soap & water.
ingestion/inhalation: no emergency care anticipated. Note to
physician: this material has very low acute toxicity. There is no
specific antidote. Direct treatment at control of the symptoms &
the clinical condition of the patient.
Hcc: n1
nrc/state lic num: none
boiling pt: b.P. Text: 212f,100c
vapor pres: 20 mm
vapor density: >1
spec gravity: 0.98 (density)
evaporation rate & reference: slower than n-buac
solubility in water: dispersable
appearance and odor: opaque white liquid, mild odor
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: after evaporation of water, burning of
the residue can produce carbon dioxide,carbon monoxide & oxides of
silicon.
conditions to avoid polymerization: will not occur.
Waste disposal methods: incinerate in a furnace or otherwise dispose of
i/a/w appropriate federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
fraction by wt: >50%
other rec limits: none recommended
ingred name: polymethylsiloxane
fraction by wt:
other rec limits: none recommended
ingred name: proprietary additives
other rec limits: none recommended
Ld50 lc50 mixture: tlv: 400 ppm.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none specified by manufacturer.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: for eyes-flush with water for 15 min. Obtain medical
attention. For skin-rinse affected area thoroughly with soap and
water. If irritation develops seek medical attention. For
ingestion-do not induce vomiting. Obtain medical attention.
forinhalation-move victim to fresh air if symptoms persists. Seek
medical attention.
Hcc: f2
boiling pt: b.P. Text: 114-285f
vapor pres: 180
vapor density: 3.2
spec gravity: 0.709
evaporation rate & reference: 6.10 (n-butyl acetate=1)
solubility in water: negligible
appearance and odor: clear colorless liquid. Aliphatic odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents or reducing agents.
stability condition to avoid: avoid all sources if ignition. Empty
containers may contain liquid or vapor residue & may be dangerous.
hazardous decomposition products: carbon monoxide and dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: according to local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hexane (n-hexane) (cercla)
cas: 110-54-3
rtecs #: mn9275000
fraction by wt:
other rec limits: none recommended
osha pel: 500 ppm
acgih tlv: 50 ppm; 9596
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: vm & p naphtha/aliphatic petroleum distillates
cas: 64742-89-8
fraction by wt:
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist
ingred name: lacolene
cas: 64742-89-8
fraction by wt:
other rec limits: none recommended
ld50 lc50 mixture: not provided.
effects of exposure: effects of single overexposure: swallowing: no evidence of
harmful effects from available information. Skin absorption: no evidence of
harmful effects from available information. Inhalation: short-ter m harmful
health effects are not expected from vapor generated at ambient temperature.
skin contact: no evidence of harmful effects from available information. Eye
contact: no evidence of harmful effe cts from available information. Effects
of repeated overexposure: no adverse effects anticipated from available
information.
explanation of carcinogenicity: not provided.
signs and symptions of overexposure: swallowing: no evidence of harmful effects
from available information. Skin absorption: no evidence of harmful effects
from available information. Inhalation: short-term harmful health effects are
not expected from vapor generated at ambient temperature. Skin contact: no
evidence of harmful effects from available information. Eye contact: no
evidence of harmful effects from available information. effects of repeated
overexposure: no adverse effects anticipated from available information.
medical cond aggravated by exposure: a knowledge of available toxicology
information suggests that overexposure is unlikely to aggravate existing
medical conditions.
first aid: swallowing: no emergency care anticipated. Skin: wash with soap and
water. Inhalation: no emergency care anticipated. Eye contact: flush eyes
thoroughly with water for several minutes. Note to physici an: toxicology
studies have shown this material to be of very low acute toxicity. There is
no specific antidote. Treatment of overexposure should be directed at the
control of symptoms and the clinica l condition of the patient.
hcc: n1
nrc/state lic no: not relevant.
boiling point: =100.C, 212.F
b.P. Text: mixture at 760mmhg
melt/freeze pt: =0.C, 32.F
vapor pres: < 20 @ 20 c (68f)
vapor density: > air
spec gravity: 0.98
ph: not available.
evaporation rate & reference: slow than n-butylacetate
solubility in water: dispersible
appearance and odor: opaque white liquid with mild odor
product id: sag 10
cage: ostm5
assigned ind: y
company name: van waters & rogers inc
street: 6100 carillon point
city: kirkland wa
zipcode: 98033
health emergency phone: 800-809-9998/304-9268418
label required ind: y
date of label review: 01/09/2000
status code: a
mfg label no: unknown.
label date: 01/04/1999
year procured: 2000
origination
eye protection ind: yes
skin protection ind: no
signal word: none
respiratory protection ind: no
health hazard: none
contact hazard: none
fire hazard: none
=======================================================
responsible party cage: ostm5
trans id no: 150981
product id: sag 10
msds prepared date: 01/04/1999
review date: 01/09/2000
mfn: 1
net unit weight: 40.8lbs can
multiple kit number: 0
unit of issue: cn
container qty: 0
type of container: can
Hazard and precautions: target organs: not provided. First aid: swallowing: no
emergency care anticipated. Skin: wash with soap and water. Inhalation: no
emergency care anticipated. Eye contact: flush eyes thoroughly with wa ter
for several minutes. In case of fire: use co2 or drychemical for small fires.
alcohol-type aqueous film-forming foam or water spray for large fires. In
case of spill: wear appropriate protective equipment. Absorb spill with
inert material. Place in a chemical waste containerfor disposal. Keep out of
reach of children. For industrial use only. Not d.O.T. Regulated for domestic
ground transport ation.
spill release procedures: collect for disposal.
neutralizing agent: not provided.
waste disposal methods: incinerate in a furnace or otherwise dispose of in
accordance with appropriate federal, state, and local regulations.
handling and storage precautions: normal precautions common to safe
manufacturing practice should be followed in handling and storage.
other precautions: none
Health hazards acute and chronic: eye: direct contact may cause
temporary redness and discomfort. skin/inhalation: no significant
irritation expected from a single short-term exposure. oral: low
ingestion hazard in normal use. Chron ic: skin/inhalation/oral: no
known applicable information.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: no known applicable information.
medical cond aggravated by exposure: non known applicable information.
First aid: eye: immediately flush with water. skin/inhalation/oral:
no first aid should be needed. comments: treat symptomatically.
Hcc: n1
boiling pt: >35.C, 95.F
melt/freeze pt: m.P/f.P text: not determined
vapor pres: not determined
vapor density: n/d
spec gravity: 1.0
ph: n/d
viscosity: 200 cst
solubility in water: not determined
appearance and odor: white liquid, no reported odor.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: none.
hazardous decomposition products: thermal decomposition may evolve the
following: silicon dioxide, carbon oxides and traces of
incompletely burned carbon compounds. Formaldehyde
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of saturated absorbent or cleaning
materials appropriately, since spontaneous heating may occur.
local, state, and federal laws and regulations may apply to
releases and disposal of this mate rial. you will need to
determine which federal, state and local laws and regulations are
applicable .
Ingred name: non hazardous ingredients
= wt: 100.
effects of exposure: swallowing acute effects: no evidence of harmful effects
from available information. Skin absorption acute effects: no evidence of
harmful effects from available information. Inhalation acute effects:
short-term harmful health effects are not expected from vapor generated at
ambient temperature. Skin contact: no evidence of harmful effects from
available information. Eye contact acute effects: no evidence of harmful
effects from available information. Other effects of overexposure: no adverse
effects anticipated from available information.
medical cond aggravated by exposure: a knowledge of available toxicology
information suggests that overexposure is unlikely to aggravate existing
medical conditions.
first aid: no emergency care anticipated. Skin: wash skin with soap and water.
inhaltion: no emergency care anticipated. Eye: flush eyes thoroughly with
water for several minutes. Note to physician: toxicology s tudies have shown
this material to be of very low acute toxicity. There is no specific
antidote. Treatment of overexposure should be directed at the control and the
clinical condition of the patient.
hcc: n1
boiling point: >100.C, 212.F
melt/freeze pt: =0.C, 32.F
vapor pres: ,26.6hpa
vapor density: >air
spec gravity: 0.9800@25c
voc grams/liter: 6
solubility in water: dispersible
appearance and odor: opaque white liquid; mild odor.
product id: sag 10
cage: 0ytz6
company name: osi specialties inc
street: 318-24 4th ave
po box: 38002
city: south charleston wv
zipcode: 25303-3802
health emergency phone: 800-424-9300
label required ind: y
date of label review: 11/29/2000
status code: a
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: none
respiratory protection ind: no
health hazard: none
contact hazard: none
fire hazard: none
=======================================================
responsible party cage: 0ytz6
trans id no: 155451
product id: sag 10
msds prepared date: 07/05/2000
review date: 11/29/2000
mfn: 2
net unit weight: 40.8 lbs
multiple kit number: 0
review ind: y
unit of issue: cn
container qty: 0
type of container: can
Hazard and precautions: swallowing acute effects: no evidence of harmful
effects from available information. Skin absorption acute effects: no
evidence of harmful effects from available information. Inhalation acute
effects: short-term harmful health effects are not expected from vapor
generated at ambient temperature. Skin contact: no evidence of harmful
effects from available information. Eye contact acute effects: no evidence
of harmful effects from available information. Other effects of overexposure:
no adverse effects anticipated from available information.
spill release procedures: collect for disposal.
waste disposal methods: incinerate in a furnace where permitted under
appropriate federal, state and local regulations. Incinerate in a furnace
where permitted under national and local regulations.
handling and storage precautions: handling precautions: normal precautions
should be followed in handling and use.
other precautions: emergency overview: normal precautions common to safe
manufacturing practices should be followed in handling & storage.