NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An inert inorganic resinlike material obtained from a variety of molecular combinations. When compounded with other ingredients, it can be applied to glass, paper, ceramics, finely powdered material, metal, or quartz; forms heat resisting, dielectric, and water resisting coatings, extremely high and low temperature lubricants, hydraulic fluids, heat transfer fluids, synthetic rubber, and the like. Does not include paints and polishes which contain in part silicone compounds.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
043940 - Chemicals noi sub2
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
M - 85.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $224.41 to $374.02.. | |
| Does NSN 6850-01-137-8525 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Navy, Federal Aviation Administration, Australia, and Canada | |
| What is the NIIN of NSN 6850-01-137-8525? | |
| 011378525 or 01-137-8525 | |
| Does NSN 6850-01-137-8525 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-137-8525? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 04, 1982 | |
Effects of overexposure: eye contact may cause temporary irritation.No
known health hazard.
First aid: if eye contact takes place,flush eyes with water for 15
minutes.If irritation persists,have person examined by a
doctor.Skin contact: wash with mild soap & water.
Hcc: n1
boiling pt: b.P. Text: 600f
vapor pres: 1.0
spec gravity: 2.75
solubility in water: negligible
appearance and odor: opaque,essentially odorless.
percent volatiles by volume: none
Stability indicator/materials to avoid: yes
none known
hazardous decomposition products: >575f or combustion will generate
sio*2,co & toxic zn fumes.
Waste disposal methods: recommended landfill iaw state,federal & local
regulations.Incineration will generate toxic zinc metal fumes.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone compound
fraction by wt: 100%
Effects of overexposure: eye/skin irritant.
First aid: eye: flush with plenty of water for at least 15 min.
irritation does not involve cornea.And should subside within hours.
skin: wash w/soap & water. Ingest: induce vomiting as quickly as
possible.Seek med ical assitance.
Hcc: n1
spec gravity: 2.3
solubility in water: insoluble
appearance and odor: white opaque color, slight odor,paste.
percent volatiles by volume: 1.5
Stability indicator/materials to avoid: yes
mineral acid, strong base,oxidizing matl,oxygen under press.
stability condition to avoid: avoid open flame,electric arc,ignition
sources.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethylsiloxane(cas#63148-62-9)(primary component)
cas: 9016-00-6
rtecs #: tq2690000
ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
osha pel: 15mg/m3 tdust/5 fume
acgih tlv: 10mg/m3 tdust; 9293
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct contact may cause
temporary discomfort with mild redness & dryness similar to
windburn; skin: several repeated prolonged exposures may irritate;
inhale: no injury is likely from relatively short exposure of less
than 8 hours; ingest: swallowing large amounts may cause digestive
discomfort.
effects of overexposure: see "health hazards"
First aid: eyes: flush with water; skin: wipe off and flush with water.
Hcc: v7
boiling pt: b.P. Text: >300f/>149c
vapor pres:
spec gravity: 2.80
evaporation rate & reference:
solubility in water: negligible
appearance and odor: paste-like, white, very little odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: heat,ignition sources
hazardous decomposition products: metal oxides, co*2, & traces of
incompletely burned c prod
Waste disposal methods: dow corning suggests that all local,state &
federal regulations concerning health & pollution be reviewed to
determine approved disposal procedures.If any question arises
concerning disposal,contact d ow corning.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 74%
osha pel: 15mg/m3 tdust/5 fume
acgih tlv: 10mg/m3 tdust; 9293
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 2%
osha pel: 10 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eyes: slight
irritation.Skin: possible irritation.Inhalation: vapors at elevated
temperatures may cause irritation.Oral: harmful if
swallowed.Chronic-exposure to filler material is unlikely to occur
except if mists or fumes are formed.
effects of overexposure: irritation of eyes, skin and respiratory tract.
medical cond aggravated by exposure: may enhance allergic conditions on
certain people.
First aid: eyes: flush immediately with water for 15 minutes.Get medical
assistance if irritation persists.Skin: wash with
water.Inhalation: remove to fresh air.Give cpr/oxygen if needed.Get
immediate medical atten tion.Ingestion: dilute with water.Get
immediate medical care.
Hcc: n1
vapor pres: < 1
vapor density: > 1
spec gravity: 2.20
solubility in water: negligible
appearance and odor: white paste
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide, zinc oxide
Waste disposal methods: spilled material and water rinses are classified
as chemical waste, and must be disposed of in accordance with
local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 60 - 80%
other rec limits: none specified
osha pel: 15mg/m3 tdust/5 fume
acgih tlv: 10mg/m3 tdust; 9293
ingred name: silicon fluid/silicone resin
cas: 63148-62-9
fraction by wt: 20 - 40%
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: contains materials irritating to the
eyes. May cause slight skin irritation. Heating can generate vapors
that may cause respiratory irritation, nausea and headaches.
inhalation hazard at room temperat ure is unlikely, due to the low
volatility of this product. Harmful if swallowed. No known chronic
health effects.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: eye-blurred vision, burning sensation and
tearing. Inhalation-nausea and headaches.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush thoroughly with water for 15 min while holding
eyelids open. Get medical attention. Skin: flush area with water,
then wash with soap & water. Get medical attention fir irritation.
inhalati on: remove to fresh air. Give oxygen ifbreathing is
difficult. Get immediate medical attention. Ingestion: dilute by
giving plenty of water to drink if victim is conscious. Get medical
attention.
Hcc: n1
boiling pt: b.P. Text: no
vapor pres: negligible
vapor density: no
spec gravity: 2.20 & 2.45
solubility in water: no
appearance and odor: white paste, no odor
percent volatiles by volume: neglie
Stability indicator/materials to avoid: yes
strong oxidizers, acids, bases.
stability condition to avoid: storage in opne containers, exposure to
open flames or uncontrolled exposure to heat, uncontrolled mixing
w/curing agent
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of silicon dioxide, and other organic substances may be
formed during combustio
Waste disposal methods: dispose of in accordance with current federal,
state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 60-70%
other rec limits: none specified
osha pel: 15mg/m3 tdust/5 fume
acgih tlv: 10mg/m3 tdust; 9293
ingred name: silicon resin
cas: 63148-62-9
fraction by wt: 30-40%
other rec limits: none specified
Ld50 lc50 mixture: not given for product as a whole
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: direct eye contact may cause temporary
discomfort with mild redness and dryness similar to windburn. A
single prolonged skin exposure causes no known adverse effect. No
irritation to eyes and respirat ory tract from vapor. Small amounts
transferred to the mouth may cause digestive discomfort.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: mild eye redness and dryness similar to
windburn.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: immediately flush with water for 15 minutes while
holding eyelids open. Get medical attention. No further first aid
should be required. Comments: treat sympotamically.
Hcc: n1
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: not given
vapor density: not given
spec gravity: 2.00
evaporation rate & reference: not given
solubility in water: insoluble
appearance and odor: white paste, no odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: silicon dioxide, carbon oxides, traces
of incompletely burned carbon compounds, formaldehyde.
Waste disposal methods: disposal of product may be governmentally
regulated.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc oxide (sara 313) (cercla)
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 69%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9495
ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 31%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
and gastrointestinal tracts. Acute- eye: may be irritating. Skin: may
cause mild irritation. Inhale: dust may cause respiratory tract
irritation. Oral: unknown. Chron ic- unknown.
explanation of carcinogenicity: none.
effects of overexposure: irritation, discomfort, tearing
medical cond aggravated by exposure: persons with pre-existing skin
disorders, eye problems or impaired respiratory function may be
more susceptible to the effects of this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Eyes: flush with water for 15 minutes. Hold eyelids open.
skin: wash with soap & water. Oral: do not induce vomiting. If
conscious, rinse out mouth with water several times. Drink slowly
1-2 glasses of water or milk. Seek medical attention. Never give
anything by mouth to an unconscious person.
Hcc: v5
nrc/state lic num: not relevant
boiling pt: b.P. Text: >572f,>300c
spec gravity: 2.6
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: paste - slight odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide and formaldehyde
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc oxide (sara 313) (cercla)
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 60 - 80%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9596
ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 10 - 30%
other rec limits: none recommended
ingred name: silica, amorphous (fumed)
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 0.5 - 5%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: not specified
health hazards acute and chronic: eye: direct contact may cause temporary
redness and discomfort. skin: no significant irritation expected
from a single exposure. Inhalation: no significant irritation
expected from a single exposure. O ral: small amounts transferred to
the mouth by fingers during use, etc.,should not injure. Swallowing
large amounts may cause digestive discomfort. Chronic: none known.
effects of overexposure: eye discomfort or redness. Skin/inhalation: no
known applicable information. Oral: upset stomach, diarrhea.
medical cond aggravated by exposure: none specified
First aid: eye: immediately flush with water. Skin/ingestion/oral: no
first aid should be needed. Treat symptomatically.
Hcc: n1
melt/freeze pt: m.P/f.P text: n/d
spec gravity: 2.00
viscosity: nap
appearance and odor: white,odorless paste
Stability indicator/materials to avoid: yes
oxidizing materials can cause reaction
stability condition to avoid: none
hazardous decomposition products: silicone dioxide,carbon oxides and
traces of incompletely burned carbon compounds, formaldehyde.
Waste disposal methods: dispose of in accordance with state, local and
federal laws. Call dow corning corporate environmental management
517-496-6315 for additional information on disposal.
Ingred name: zinc oxide (zno)
cas: 1314-13-2
rtecs #: zh4810000
> wt: 60.
osha pel: 15 mg/m3,c,dust
osha stel: 10 mg/m3 fume
acgih tlv: 10 mg/m3,twa,dust