NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
An inert inorganic resinlike material obtained from a variety of molecular combinations. When compounded with other ingredients, it can be applied to glass, paper, ceramics, finely powdered material, metal, or quartz; forms heat resisting, dielectric, and water resisting coatings, extremely high and low temperature lubricants, hydraulic fluids, heat transfer fluids, synthetic rubber, and the like. Does not include paints and polishes which contain in part silicone compounds.
The last inventory check on this NSN was done on 03/19/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $12.68 to $21.13.. | |
| Does NSN 6850-01-290-9943 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, Brazil, Singapore, Morocco, Australia, Republic Of Korea, United Kingdom, Portugal, Italy, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 6850-01-290-9943? | |
| 012909943 or 01-290-9943 | |
| Does NSN 6850-01-290-9943 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 6850-01-290-9943? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Dec 21, 1988 | |
Ld50 lc50 mixture: ld50 (oral rat) is unknown.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
tract. Acute- may cause mild skin irritation. May cause eye
irritation. Ingestion unknown. A dust hazard may be created if,
under conditions of use, solid particl es are separated from the
polymeric matrix causing respiratory tract irritation, if inhaled.
chronic- unknown.
explanation of carcinogenicity: can generate formaldehyde at high
temperatures which is an irritant and potential cancer hazard.
effects of overexposure: irritation
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: rinse mouth with water several
times.
Hcc: v7
nrc/state lic num: not relevant
spec gravity: 1.035
viscosity: not relevant
evaporation rate & reference: >1 (n-butyl acetate=1)
solubility in water: insoluble
appearance and odor: off white solid - slight odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
stability condition to avoid: temperatures above 300f (149c)
hazardous decomposition products: silicone dioxide, formaldehyde
Waste disposal methods: dispose of in accordance with all local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: trade secret component
fraction by wt: 1 - 5%
other rec limits: none recommended
ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 5 - 10%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 80 - 93%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes. Acute-
eyes: slightly irritating. Skin: non-irritating. Inhale: not likely.
oral: low acute oral toxicity. Chronic- unknown.
explanation of carcinogenicity: may generate formaldehyde as a byproduct
of oxidative thermal decomposition. Formaldehyde is human
carcinogen.
effects of overexposure: slight eye irritation, discomfort, tearing,
redness
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: if conscious, drink 1-2 glasses
of wate r. Get medical attention. Never give anything by mouth to
an unconscious person. Do not leave victim unattended. Treat
symptomatically.
Hcc: v7
nrc/state lic num: not relevant
decomp temp: decomp text: 300f,149c
spec gravity: 1.03
solubility in water: insoluble
appearance and odor: translucent waxy solid - odorless
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids, strong bases
stability condition to avoid: excessive heat (300f/149c), open flame,
sparks, combustible materials
hazardous decomposition products: dimethylcyclosiloxanes,
methylphenylcyclosiloxanes, formaldehyde, carbon monoxide, carbon
dioxide, silica (crystalline)
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations. Do not
flush to sewer.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: poly (dimethylsiloxane)/dimethylpolysiloxane fluid
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 90 - 95%
other rec limits: none recommended
ingred name: silica, amorphous (fumed)/treated
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 5 - 10%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct contact may cause temporary
discomfort w/mild redness & dryness similar to windburn.
skin: single prolonged exposure causes no known adverse effect.
inhalation: no irritation to respiratory p assages likely.
oral: small amounts transferred to mouth by fingers during use
should not injure.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis found no listing & does not expect it to be
carcinogenic.
effects of overexposure: none n/k
.
medical cond aggravated by exposure: overexposure to any chemical may
result in enhansvent of pre-existing adverse medical conditions &
allergic reactions.
First aid: eyes: immediately flush w/water. Skin: wipe off & flush
w/water. No first aid should be needed for inhalation or ingestion.
.
Hcc: n1
nrc/state lic num: none
vapor pres:
spec gravity: 1.1
solubility in water:
appearance and odor: paste like, some color w/very little odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing material may cause a reaction.
hazardous decomposition products: silicon dioxide, co2 & traces of
incompletely burned carbon products.
conditions to avoid polymerization: will not occur.
Waste disposal methods: review all federal, state & local regulations
concerning health & pollution to determine disposal procedures.
contact dow corning if there are any disposal questions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicon dioxide, celite 322
cas: 7631-86-9
rtecs #: vv3100000
fraction by wt: 9%
osha pel: 80 mg/cum
acgih tlv: 0.2 mg/cum
ingred name: dimethyl, methyl silicone resin
cas: 68037-74-1
other rec limits: none recommended
Routes of entry: inhalation: unknown skin: unknown ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: contact with eyes may cause
redness. Flush eyes with copoius amounts of water for 15 minutes.
if irritations persists contact a physician. Skin: contact with
skin causes no know irritation. Wash contacted areas with soap and
water. Ingestion: if ingested seek prompt medical attention. Do not
induce vomiting.
effects of overexposure: eyes: contact with eyes may cause redness.
flush eyes with copoius amounts of water for 15 minutes. If
irritations persists contact a physician. Skin: contact with skin
causes no know irritation. Wash contacted areas with soap and
water. Ingestion: if ingested seek prompt medical attention. Do not
induce vomiting.
First aid: eyes: flush eyes with copoius amounts of water for 15
minutes. If irritations persists contact a physician. Skin: wash
contacted ares with soap and water. Ingestion: if ingested seek
prompt medical at tention. Do not induce vomiting.
Hcc: v7
boiling pt: >300.C, 572.F
vapor pres:
vapor density: >1
spec gravity: 1.03
ph: neutral
solubility in water: insoluble
appearance and odor: translucent paste
Stability indicator/materials to avoid: yes
strong acids and oxidizing materials.
hazardous decomposition products: carbon dioxide, carbon monoxide,
silicon dioxide.
conditions to avoid polymerization: will not occur
Waste disposal methods: dispose in accordance with federal, state and
local regulations.
Ingred name: dimethyl polysiloxane
cas: 63148-62-9
rtecs #: jt6484500
minumum % wt: 75.
maxumum % wt: 95.
ingred name: silicon dioxide
cas: 112945-52-5
rtecs #: vv7310000
minumum % wt: 5.
maxumum % wt: 25.
Ld50 lc50 mixture: no test data found for product.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: potential health effects: acute eye:
slightly irritating. May cause redness, irritation. Acute skin:
non-irritating. Low acute dermal toxicity. Acute inhalation:
inhalation not likely. Acute ingesti on: low acute oral toxicity.
chronic effects: this product does not contain any ingredient
designated by iarc, ntp, acgih or osha as probable or suspected
human carcinogens.
explanation of carcinogenicity: this product does not contain any
ingredient designated by iarc, ntp, acgih or osha as probable or
suspected human carcinogens.
effects of overexposure: not provided
medical cond aggravated by exposure: no specific information found.
First aid: eye exposure: immediately absorb excess with clean absorbent
cloth or cotton. Then, hold eyelids open and flush with a steady,
gentle stream of water for at least 15 minutes. Seek medical
attention if irritation develops/persists/if visual changes occur.
skin exposure: immediately wipe excess material off skin with a dry
cloth; then wash skin with plenty of soap and water. Seek medical
attention i f irritation develops/persists. Inhalation: remove to
fresh air. Seek medical attention if respiratory
irritation/distress continues. Ingestion: if victim is conscious
and alert, give 1-2 glasses of w ater to drink. Seek medical
attention.
Hcc: v5
nrc/state lic num: not relevant
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
vapor pres: not available
spec gravity: 1.03 at 25 c (77 f)
solubility in water: insoluble
appearance and odor: translucent waxy solid; odorless.
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong bases, strong acids, strong oxidizing agents.
stability condition to avoid: combustible materials, heat, open flame,
spark.
hazardous decomposition products: dimethylcyclosiloxanes,
methylphenylcyclosiloxanes, formaldehyde
Waste disposal methods: chemical additions, processing or otherwise
altering this material may make the waste management information
presented in this msds incomplete, inaccurate or otherwise
inappropriate. Please be advised that state and local requirements
for waste disposal may be more restrictive or otherwise different
from federal laws and regulations. Consult state
Ingred name: dimethylpolysiloxane fluid
cas: 63148-62-9
rtecs #: jt6484500
minumum % wt: 90.
maxumum % wt: 95.
other rec limits: not provided
osha pel: not found
acgih tlv: not found
ingred name: silica, amorphous treated
cas: 112945-52-5
rtecs #: vv7310000
minumum % wt: 5.
maxumum % wt: 10.
other rec limits: not provided
osha pel: not found
acgih tlv: not found