NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Pigment dispersed in a varnish vehicle containing natural or synthetic resin. The varnish may be modified with drying oil to the extent that the total drying oil content of the vehicle, including the oil in the varnish, does not exceed 75 percent, by weight, of the total nonvolatile portion of the vehicle. When applied in a thin layer, it dries principally by polymerization and/or oxidation to form a hard, smooth, opaque film. Excludes lacquer; enamel, heat resisting; bituminous and ceramic coatings and gold size.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES20T1187 | 2019-12-09 | PEPCE | 1 CN |
| SPE8ES19T8511 | 2019-10-01 | PEPCE | 1 CN |
| SPE8ES19T3710 | 2019-03-12 | PEPCE | 10 CN |
| SPE8ES19T3041 | 2019-02-12 | PEPCE | 5 CN |
| SPE8ES18T9564 | 2018-09-11 | PEPCE | 5 CN |
| SPE8ES18T9269 | 2018-08-28 | PEPCE | 1 CN |
| SPE8ES18T8680 | 2018-08-16 | PEPCE | 8 CN |
| SPE8ES17T6657 | 2017-09-11 | PEPCE | 32 CN |
| SPE8E515T7063 | 2015-05-11 | PEPCF | 52 CN |
| SPE8E515T5919 | 2015-04-06 | PEPCF | 6 CN |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Paints and varnish (incl enamels & lacquers) based on synthetic polymers, etc in a non aqueous medium, Nisei
Paints and varnishes (including enamels and lacquers) based on synthetic or chemically modified natural polymers, non aqueous plastics in solution
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACJC - Marine operations coatings
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
621 - Paint
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $866.09 to $1,443.49.. | |
| Does NSN 8010-01-344-5096 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Navy, and General Services Administration | |
| What is the NIIN of NSN 8010-01-344-5096? | |
| 013445096 or 01-344-5096 | |
| Does NSN 8010-01-344-5096 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8010-01-344-5096? | |
| Solicitation SPE8ES20T1187 for qty 1 on 12/02/2019 | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 30, 1991 | |
Ld50 lc50 mixture: ld50 0.85 g/kg, lc50: >21 ppm, see msds.
health hazards acute and chronic: vapor or spray mist can be harmful.
irritating to eyes, skin, nose & throat. Excessive inhalation can
cause headache, nausea or dizziness. Repeated & prolonged
occupational overexposure to solvents is associated with permanent
brain and nervous system damage. Can be harmful if swallowed. Can
be harmful if inhaled **
effects of overexposure: **or absorbed through the skin. Overexposure
can damage central nervous system. Overexposure or ingestion can
cause lung kidney and/or liver damage. Chemical pneumonia.
medical cond aggravated by exposure: respiratory. Kidney and liver
disorders. Skin.
First aid: overexposure to vapor or spray mist: provide fresh air. If
breathing labored, give oxygen/artificial respiration. For skin
contact, wash thoroughly w/soap & water. For eyes: flush immed
w/plenty of wa ter for at least 15 minutes & get med attention. If
swallowed, drink 1-2 glasses of water to dilute. Do not induce
vomiting. Consult physician/poison control center immed. Treat
symptomatically.
Hcc: f4
boiling pt: b.P. Text: 300 to 336f
vapor density: > air
spec gravity: 13.1-13.3lb/gal
evaporation rate & reference: (bu ac=1) 0.12 to 0.37
appearance and odor: liquid; solvent odor.
percent volatiles by volume: 41
Stability indicator/materials to avoid: yes
strong oxidizers, acids, alkalies.
stability condition to avoid: heat, open flame, arc or sparks.
hazardous decomposition products: co and co2. Iron oxide fumes.
Waste disposal methods: in separate, closed metal container in
accordance with all applicable regulations. Epa waste no. D001,
d005.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide (as ti) possible impurities:
[amorphorus],
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: zinc phosphate (sara iii)
cas: 7779-90-0
rtecs #: td0590000
fraction by wt:
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3
ingred name: barium metaborate hydrate (cercla)
cas: 13701-59-2
rtecs #: cq9570000
fraction by wt:
other rec limits: none specified
acgih tlv: 10 mg/m3
ingred name: mineral spirits (benzene [calif prop 65] @
pressure 2 mm hg @ 68f)
cas: 64741-41-9
fraction by wt: 9.93%
other rec limits: none specified
osha pel: 100 ppm/525 mg/m3
acgih tlv: 100 ppm/ 525 mg/m3
ingred name: high flash naphtha (sara iii) (benzene calif prop 65] d-900
ppm) (vapor pressure 2.7 mm hg @ 68f)
cas: 64742-95-6
fraction by wt: 3.53%
other rec limits: mfg tlv 50 ppm
ingred name: 1,2,4-trimethyl benzene (sara iii)
cas: 95-63-6
rtecs #: dc3325000
fraction by wt: 2.47%
other rec limits: none specified
acgih tlv: 25 ppm/125 mg/m3
ingred name: trimethyl benzene
cas: 25551-13-7
rtecs #: dc3220000
fraction by wt: 2.46%
other rec limits: none specified
acgih tlv: 25 ppm/125 mg/m3
ingred name: mineral spirits (benzene [calif prop 65]
pressure
cas: 64742-47-8
fraction by wt: 2.02%
other rec limits: none specified
osha pel: 500 ppm/1150 mg/m3
acgih tlv: 300 ppm/1350 mg/m3
ingred name: iron oxide (pigment content is dependent on color) (as fe
fume)
cas: 1309-37-1
rtecs #: no7400000
fraction by wt:
other rec limits: none specified
osha pel: 10 mg/m3 (fe)
acgih tlv: 5 mg/m3(fe),b2; 9293
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: severe
irritation/redness/tearing/blurred vision. Skin: moderate
irritation/defatting/dermatitis with prolonged contact. Inhal:
possible dizziness/weakness/fatigue/nausea/headache w/excessive in
hal. High concentrations may result in narcosis (cns depression).
ingest: gastrointestinal irrit/nausea/vomiting/*
effects of overexposure: *diarrhea. Aspiration of material into lungs
can cause chemical pneumonitis, which can be fatal.
First aid: eyes: flush w/clean, lukewarm water >15 mins, occasionally
lifting lids. Get med aid. Skin: remove contaminated clothes. Wash
well w/soap,water. Wash contaminated clothes well before reuse.
inhal: get fresh air. Apply artif respiration or oxgen as
necessary. Get med aid. Ingest: keep person warm/quiet. Get immed
med aid. Do not induce vomiting. Vomiting can lead to pneumonitis
which can be fatal.
Boiling pt: b.P. Text: 310 to 390f
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: >390f,>199c
vapor pres: 2 mm
vapor density: 4.9
spec gravity: 1.73
ph: na
viscosity: 77f
evaporation rate & reference: 0.12 (buac)
solubility in water: negligible
appearance and odor: viscous pigmented liquid w/light mineral spirits
odor
percent volatiles by volume: 48.0
corrosion rate: na
Stability indicator/materials to avoid: yes
strong oxidizing agents. Material will dissolve or soften some plastics
and rubber.
stability condition to avoid: heat, sparks, open flame, fire.
hazardous decomposition products: carbon monoxide, carbon dioxide,
possibly acrolein.
conditions to avoid polymerization: strong oxidizing agents.
Waste disposal methods: dispose in accordance w/local, state, federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral spirits
cas: 64642-88-7
fraction by wt: 9.0%
other rec limits: none recommended
ingred name: barium metaborate monohydrate
cas: 13701-59-2
fraction by wt: 15.0%
other rec limits: none recommended
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 21.0%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9495
ingred name: chlorinated aklyd resin
fraction by wt: 35.0%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9495
ingred name: zinc phosphate
cas: 7779-90-0
rtecs #: td0590000
fraction by wt: 17.0%
other rec limits: none recommended
ingred name: driers, unspecified
fraction by wt: 3.0%
other rec limits: none recommended
Health hazards acute and chronic: acute: eyes: severe irritation. Skin:
primary irritation. Harmful if absorbed thru skin.
prolonged/repeated contact: allergic skin reaction. Inhal: harmful
if inhaled. Irritates eyes/nose/throat & lu ngs. High vapor
concentrations may cause irritation of respiratory system &
permanent brain/nervous system damage. Intentional miuse can be
harmful or fatal. chronic: avoid long term/repeated contact .
First aid: if swallowed: give 1 or 2 glasses of water. Do not induce
vomiting. Keep person warm, quiet, and get immed medical atten.
eyes: flush with water for 30 minutes, lifting lids to rinse entire
eye. Call dr immed. Skin: flush w/copious amounts of water, then
follow w/ soap & water. call dr. Inhalation: remove to fresh air.
applysupportive measures as required. other: if ingest: any type
of overexpo sure/symptoms of overexposure occur during/following
use of product, contact poison control center, emerency room, or
physician immed. Have msds info available.
Boiling pt: b.P. Text: 310 to 390 f @ 760 mm
melt/freeze pt: m.P/f.P text: na
vapor pres: 2.00 mm hg @ 68 f
vapor density: 4.9 air =1
spec gravity: 1.62 - 1.65
voc pounds/gallon: 340
ph: na
voc grams/liter: 2.8
corrosion rate: na
Stability indicator/materials to avoid: yes
strong alkalies, strong mineral acids, or strong oxidizing agents.
hazardous decomposition products: may produce haz decomp products when
heated. Welding, brazing, or flame cutting may produce fumes,
including cabon monoxide, hydrogen chloride gas.
Waste disposal methods: dispose in accordance w/local, state, federal
regulations. Empty containers should be recycled or disposed of
through approved waste management facility.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: barium metaborate
cas: 13701-59-2
fraction by wt: 15.0%
other rec limits: 5 mg/m3
osha pel: total dust
acgih tlv: total dust
ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 21.0%
other rec limits: 10 mg/m3
osha pel: total dust
acgih tlv: total dust
ingred name: zinc phosphate
cas: 7779-90-0
rtecs #: td0590000
fraction by wt: 16.0%
other rec limits: none recommended
ingred name: polymer base chloroendic alkyloid
rtecs #: bp1008526
code: f
fraction by wt: 35.0%
ingred name: trade secret: registry #41-0177680-5000 381 p (njapa)
resin solution
rtecs #: rs1010182
code: f
ingred name: paint thinner
cas: 8052-41-3
fraction by wt: 9.0%
osha pel: 100 ppm twa
acgih tlv: 100 ppm twa
ingred name: driers
cas: 136-52-7
fraction by wt: 3.0%
ingred name: leveling agent
rtecs #: la1001685
code: f
ingred name: antiskinning agent
fraction by wt: 1.0%
ingred name: thixatropic agent
rtecs #: ta1000608
code: f
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: ingestion: keep person warm, quiet and
get immediate medical attention. Eye contact: causes severe eye
irritation. Skin contact: caused primary skin irritation. May be
harmful if absorbed through the skin. inhalation: vapor and spray
mist harmful if inhaled. Vapor irritates eyes, nose, throat. May
irritate lungs. avoid long term or repeated contact. product
contains titanium dioxide.
effects of overexposure: eye watering, headaches, nausea, dizziness, and
loss of coordination are indication that solvent levels are too
high. Redness, itching, burning sensation and visual disturbances
may indicate excessive eye contact, dryness, itching, cracking,
burning, redness, and swelling are conditions associated with
excessive skin contact.
First aid: ingestion: if swallowed, give 1 or 2 glasses of water, but do
not induce vomiting. Eye contact: flush eyes immediately with
plenty of water for at least 30 minutes. skin contact: flush
immediately wi th plenty of water followed by washing with soap and
water. Inhalation: if affected by inhalation of vapors or spray
mist, remove to fresh air. Ingestion, any type of overexposure or
symptoms of overe xposure occurs during or following the use of
this product.
Boiling pt: =154.4c, 310.F
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
vapor pres: 2.000 mmhg at 68 f
vapor density: 4.9
spec gravity: 1.62-1.65
appearance and odor: none
Stability indicator/materials to avoid: yes
avoid contact with strong alkalis, strong mineral acids, or strong
oxidizing agents.
stability condition to avoid: avoid contact with strong alkalis, strong
mineral acids, or strong oxidizing agents.
hazardous decomposition products: none
Waste disposal methods: waste material must be disposed of in accordance
with federal state, provinclal, and local environmental control
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 21.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: zinc phosphate
= wt: 16.
ingred name: barium metaborate
= wt: 15.
ingred name: chlorendic alkyd
= wt: 35.
ingred name: paint thinner
cas: 8052-41-3
code: f
rtecs #: wj8925000
= wt: 9.
osha pel: 2900 mg/m3;500 ppm
acgih tlv: 525 mg/m3;100 ppm
ingred name: drivers leveling agent
cas: 136-52-7
code: f
= wt: 3.
ingred name: antiskinning agent thixatropic agent
= wt: 1.
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: ingestion: keep person warm, quiet and
get medical attention. Eye contact: causes severe eye irritation.
skin contact: causes primary skin irritation. May be harmful if
absorbed through the skin. Inha lation: vapor and spray mist
harmful if inhaled. Vapor irritates eyes, nose, and throat. May
irritate lungs. Repeated exposure to high vapor concentrations may
cause irritation of the respiratory syst em and permanent brain and
nervous system damage. Intentional misuse by deliberately
concentrating and inhaling the contents can be harmful or fatal.
effects of overexposure: eye watering, headaches, nausea, dizziness, and
loss of coordination are indication that solvent levels are too
high. Redness, itching, burning sensation and visual disturbances
may indicate excessive eye contact. Dryness, itching, cracking,
burning, redness, and swelling are conditions associated with
excessive skin contact. Chronic exposure: avoid long term and
repeated contact. Product contains titanium dioxide.
First aid: ingestion: if swallowed, give 1 or 2 glasses of water, but do
not induce vomiting.Eye contact: flush eyes immediately with plenty
of water for at least 15 minutes. Skin contact: flush immediately
with plenty of water followed by washing with soap and water.
inhalation: if affected by inhalation of vapor or spray mist,
remove to fresh air. Apply artificial respiration and other
supportive measures as required. Contact poison control center
immediately if ingested.
Boiling pt: >154.4c, 310.F
b.P. Text: 310-390 f at 760 mm hg
vapor pres: 2.000 mmhg at 68 f
vapor density: 4.9
spec gravity: 1.62-1.65
voc pounds/gallon: 340
Stability indicator/materials to avoid: yes
avoid contact with strong alkalis, strong mineral acids, or strong
oxidizing agents.
stability condition to avoid: avoid contact with strong alkalis, strong
mineral acids, or strong oxidizing agents.
Waste disposal methods: waste material must be disposed of in accordance
with federal state, provincial, and local environmental control
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 21.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: zinc phosphate
= wt: 16.
ingred name: barium metaborate
= wt: 15.
ingred name: polymer base
= wt: 35.
ingred name: resin solution
ingred name: paint thinner
cas: 8052-41-3
code: f
rtecs #: wj8925000
= wt: 9.
osha pel: 2900 mg/m3;500 ppm
acgih tlv: 525 mg/m3;100 ppm
ingred name: driers
cas: 136-52-7
code: f
= wt: 3.
ingred name: leveling agent antisking agent thixatropic agent
= wt: 1.