Worldwide distributor of NSN parts and consumables located in the USA.
A finish coat material composed of a base compound and an accelerator. The base material consists of an epoxy resin which is a reaction product of epichlorohydrin. The activator is normally a polyamide, polyamine, or similar compound. Usually, for colored epoxy finishes, only the base material contains pigment or dye, but both base and activator may be colored. The material may also be furnished with pigment separate from both base compound and accelerator.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Epoxide resins
Epoxide resins, in primary forms
Plastic materials
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
621 - Paint
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
No pre-dated pricing for this NSN could be found. | |
Does NSN 8010-01-368-5447 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
No recorded entities for this stock number. | |
What is the NIIN of NSN 8010-01-368-5447? | |
013685447 or 01-368-5447 | |
Does NSN 8010-01-368-5447 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8010-01-368-5447? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Dec 03, 1992 |
Ld50 lc50 mixture: see ingredients
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: vapor or spray mist can be harmful.
irritating to eyes, skin, nose and throat. Excessive inhalation can
cause headache, nausea or dizziness. Repeated and prolonged
occupational overexposure to solvent s is associated with permanent
brain and nervous system damage. Can be harmful if swallowed. Can
be (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: harmful if inhaled. Can be harmful if
inhaled or absorbed through the skin. Overexposure can damage
lungs, central nervous system. Skin sensitization or allergic
reaction can occur such as r ash or hives. Aspiration hazard.
medical cond aggravated by exposure: respiratory. Allergies, skin. Eyes.
First aid: inhal: provide fresh air; if breathing labored, give oxygen
or artificial respiration. Skin: wash thoroughly with soap and
water. Eyes: flush immediately with plenty of water for at least 15
minutes a nd get medical attention. Ingest: drink1 or 2 glasses of
water to dilute. Do not induce vomiting. Consult md or poison
control center immediately. Treat symptomatically.
Boiling pt: b.P. Text: >300f,>149c
vapor pres: see ings
vapor density: hvr/air
spec gravity: 1.26
evaporation rate & reference: 0.10 (butyl acetate=1)
appearance and odor: liquid; solvent odor.
percent volatiles by volume: 30
Stability indicator/materials to avoid: yes
strong oxidizers, acids, alkalies.
stability condition to avoid: heat, open flame, arc or sparks.
hazardous decomposition products: carbon monoxide and carbon dioxide,
no*x, aldehydes.
Waste disposal methods: in separate, closed metal container in
accordance with all applicable federal, state and local
regulations. Epa waste no: d001.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin containing ingredients 2-4. vp: 0.03 @ 170f.
ld50: 11.4 g/kg.
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 52.62%
osha pel: n/k
acgih tlv: n/k
ingred name: propane, 1-chloro-2,3-epoxy-; (epch) (sara 302/313)
(cercla) % wt:
cas: 106-89-8
rtecs #: tx4900000
fraction by wt:
osha pel: 5 ppm, s
acgih tlv: 2 ppm, s
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: ether, bis(2,3-epoxypropyl); (dge) (sara 302) % wt:
2ppm
cas: 2238-07-5
rtecs #: kn2350000
fraction by wt:
osha pel: 0.5 ppm
acgih tlv: 0.1 ppm
ingred name: propane, 1,2-epoxy-3-phenoxy-; (pge) % wt: 6ppm
cas: 122-60-1
rtecs #: tz3675000
fraction by wt:
osha pel: 10 ppm
acgih tlv: 1 ppm, s
ingred name: talc (powder), containing no asbestos fibers; (magnesium
silicate)
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 25.27%
osha pel: 20 mppcf
acgih tlv: 2 mg/m3 rdust
ingred name: solvent naphtha (petroleum), light aromatic; (high flash
naphtha). vp: 2.7 @ 68f. Ld50: 4.7 g/kg.
cas: 64742-95-6
rtecs #: wf3400000
fraction by wt: 11.31%
osha pel: n/k
acgih tlv: n/k
ingred name: benzene, 1,2,4-trimethyl-; (1,2,4-trimethyl benzene)
(benzene content:
cas: 95-63-6
rtecs #: dc3325000
fraction by wt: 8.38%
osha pel: 25 ppm
acgih tlv: 25 ppm
ingred name: polyamide. Ld50: 5 g/kg
fraction by wt: 1.16%
osha pel: n/k
acgih tlv: n/k
Routes of entry: inhalation: yes skin: unknown ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: causes eye and skin irritation.
ingestion: harmful if swallowed. Inhalation: prolonged inhalation
can cause dizziness, nausea.
effects of overexposure: eyes: irritation, redness. Skin: redness.
inhalation: prolonged inhalation can cause dizziness, nausea.
medical cond aggravated by exposure: none known
First aid: eyes: flush with plenty of water for at least 15 minutes.
seek medical attention. Skin: wash with soap and water. Inhalation:
remove to fresh air. Ingestion: do not induce vomiting. Drink large
quanti ties of water. Call a physician. Contains alkaline amines
and epoxy resins.
Spec gravity: 1.4
solubility in water: slight
appearance and odor: white resin base and black hardener with amine odor
Stability indicator/materials to avoid: yes
acids. Do not mix with other chemicals.
stability condition to avoid: none
hazardous decomposition products: burning may yield carbon monoxide,
carbon dioxide.
Waste disposal methods: dispose of used absorbent in proper receptacle
for landfill. This material is not an epa hazardous waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: tetraethylenepentamine
cas: 112-57-2
rtecs #: kh8585000
> wt: 1.
ingred name: 2,4,6-tris.(.(dimethylamino)methyl.).Phenol
cas: 90-72-2
rtecs #: sn3500000
< wt: 1.
ingred name: reaction products of epichlorohydrin & bisphenol a
> wt: 1.
ingred name: epichlorohydrin - polyglycol reaction product
> wt: 1.
ingred name: tetraethylenepentanine, tall oil fatty acid amido amine
> wt: 1.