Worldwide distributor of NSN parts and consumables located in the USA.
A finish coat material composed of a base compound and an accelerator. The base material consists of an epoxy resin which is a reaction product of epichlorohydrin. The activator is normally a polyamide, polyamine, or similar compound. Usually, for colored epoxy finishes, only the base material contains pigment or dye, but both base and activator may be colored. The material may also be furnished with pigment separate from both base compound and accelerator.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE8E515T6434 | 2015-04-20 | PEPCF | 25 KT |
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Epoxide resins
Epoxide resins, in primary forms
Plastic materials
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACJD - Aerospace operations coatings
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149980 - Paint and related materials
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $300.31 to $500.51.. | |
Does NSN 8010-01-419-1146 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Navy, General Services Administration, and Republic Of Korea | |
What is the NIIN of NSN 8010-01-419-1146? | |
014191146 or 01-419-1146 | |
Does NSN 8010-01-419-1146 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8010-01-419-1146? | |
Solicitation SPE8E515T6434 for qty 25 on 04/08/2015 | |
When was this national stock number assigned to the federal catalog? | |
Sep 13, 1995 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: repeated/prolonged occupational
overexposure to solvents associated w/permanent brain/nervous
system damage. Intentional misuse by deliberately concentrating and
inhaling the contents may be harmful o r fatal. Prolonged
overexposure (inhal)may cause delayed lung disease.
effects of overexposure: overexposure may produce various effects. Acute
toxicity (headache, dizziness, nausea, loss consciousness. Severe
eye irritation possibly resulting permanent damage. Irritated
mucous membranes. Vomiti ng from ingestion. Skin defatting/drying.
sensitization after repeated contact.
First aid: eye: flush w/plenty clean h20 15 min, lifting lids, get med
attn. Inhal: get fresh air, provide oxygen if breath difficult.
give artif resp if not breathing. Get med attn. Keep victim
warm/quiet. Neve r give uncons person liq. Ingest: call dr. Immed.
don't induce vomit. If vomit spontaneously, keep head below hips.
skin: flush w/h20 while removing contam clothes/shoes. If irrit
persist, get med aid
Boiling pt: b.P. Text: 175 to 344f
vapor density: >air
spec gravity: 1.59
ph: na
viscosity: 64 ku
evaporation rate & reference: 3.26 x n-butyl acetate
solubility in water: slight
appearance and odor: gray liquid, solvent odor
percent volatiles by volume: 36.3
Stability indicator/materials to avoid: yes
oxidizing agents & strong alkalies. Not corrosive to metal.
stability condition to avoid: heat, sparks, open flames, strong
alkalies, & oxidizing agents.
hazardous decomposition products: incomplete combustion or products like
this may generate highly poisonous carbon monoxide and other toxic
gases
Waste disposal methods: disposal must be in accordance with current
local, state & federal reg. Contact an approved disposal facility
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii) (vp =
71.2 mmhg)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 11.0%
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 2.7%
osha pel: 100 ppm
acgih tlv: 100 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: epoxy resin
cas: 25085-99-8
fraction by wt: 13.0%
other rec limits: none recommended
ingred name: naphtha, light aromatic (vp = 9.0 mmhg)
cas: 64742-95-6
fraction by wt: 4.3%
other rec limits: none recommended
osha pel: 50 ppm
acgih tlv: 50 ppm 9091
ingred name: aliphatic glycidyl ether (diluent 8)
cas: 68609-97-2
fraction by wt: 3.6%
other rec limits: none recommended
ingred name: silicone dioxide (diatomaceous earth)
cas: 68855-54-9
rtecs #: hl8600000
fraction by wt: 9.8%
other rec limits: none recommended
osha pel: 10 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: repeated/prolonged occupational
overexposure to solvents associated w/permanent brain/nervous
system damage. Intentional misuse by deliberately concentrating and
inhaling the contents may be harmful o r fatal. Prolonged
overexposure (inhal)may cause delayed lung disease.
explanation of carcinogenicity: may contain trace amts of some chem
known to the state of cato be carcinogens or reprodctive toxins.
effects of overexposure: overexposure may produce various effects. Acute
toxicity (headache, dizziness, nausea, loss consciousness. Severe
eye irritation possibly resulting permanent damage. Irritated
mucous membranes. Vomiti ng from ingestion. Skin defatting/drying.
sensitization after repeated contact.
First aid: eye: flush w/plenty clean h20 15 min, lifting lids, get med
attn. Inhal: get fresh air, provide oxygen if breath difficult.
give artif resp if not breathing. Get med attn. Keep victim
warm/quiet. Neve r give uncons person liq. Ingest: call dr. Immed.
don't induce vomit. If vomit spontaneously, keep head below hips.
skin: flush w/h20 while removing contam clothes/shoes. If irrit
persist, get med aid
Boiling pt: b.P. Text: 175 to 401f
vapor density: >air
spec gravity: 1.06
viscosity: 70 ku
evaporation rate & reference: 3.77 x n-butyl acetate
solubility in water: slight
appearance and odor: clear liquid
percent volatiles by volume: 80.9
Stability indicator/materials to avoid: yes
oxidizing agents & strong alkalies. Not corrosive to metal.
stability condition to avoid: heat, sparks, open flames, strong
alkalies, & oxidizing agents.
hazardous decomposition products: incomplete combustion or products like
this may generate highly poisonous carbon monoxide and other toxic
gases
Waste disposal methods: disposal must be in accordance with current
local, state & federal reg. Contact an approved disposal facility
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii) (vp =
71.2 mmhg)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 48.0%
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: nh2ch2ch(ch3)(ch2)3nh2 (vp=130.0 mmhg)
cas: 15520-10-2
rtecs #: sa0248500
fraction by wt: 14.0%
other rec limits: none recommended
osha pel: not est.
acgih tlv: not est.
ingred name: phenyl carbinol (may contain as impurities: 100-52-7
benzaldehyde 0.3%, 103-50-4 dibenzyl ether 0.1%, 150-76-5 0.025%
cas: 100-51-6
rtecs #: dn3150000
fraction by wt: 13.0%
other rec limits: none recommended
ingred name: epoxy resin
cas: 25085-99-8
fraction by wt: 5.7%
other rec limits: none recommended