NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES20T4258 | 2020-04-14 | PEPCE | 18 KT |
| SPE8ES20T2433 | 2020-02-10 | PEPCE | 32 KT |
| SPE8ES20T1272 | 2019-12-10 | PEPCE | 14 KT |
| SPE8ES20T0361 | 2019-10-28 | PEPCE | 46 KT |
| SPE8ES19T8529 | 2019-10-02 | PEPCE | 28 KT |
| SPE8ES19T7331 | 2019-08-14 | PEPCE | 12 KT |
| SPE8ES19T1232 | 2018-11-21 | PEPCE | 120 KT |
| SPE8ES18T9674 | 2018-09-17 | PEPCE | 46 KT |
| SPE8ES18T8648 | 2018-08-13 | PEPCE | 120 KT |
| SPE8ES18T7184 | 2018-06-25 | DDC00 | 27 KT |
The last inventory check on this NSN was done on 03/31/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
620 - Paint, in individual containers less than 10 cubic ft
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
T - 55.0
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $631.19 to $1,051.99.. | |
| Does NSN 8030-00-142-9124 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, National Aeronautics and Space Administration, General Services Administration, Poland, Spain, Germany, Greece, and Turkey | |
| What is the NIIN of NSN 8030-00-142-9124? | |
| 001429124 or 00-142-9124 | |
| Does NSN 8030-00-142-9124 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-00-142-9124? | |
| Solicitation SPE8ES20T4258 for qty 18 on 04/09/2020 | |
| When was this national stock number assigned to the federal catalog? | |
| Sep 09, 1968 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: direct contact irrits slightly w/
redness,swelling.Skin: repeated prolonged contact(24-48
hours)irrits. Repeated,prolonged contact(24-48 hours)irrits
seriously,may burn mildly. Inhale: short vapor e xposure may cause
drowsiness,irrit nose,throat.Degree of effects depends on
concentration and length of exposure
effects of overexposure: nk ingest: small amts transfered to the mouth by
fingers during use,etc.,should not injure.Swallowing lrge amts may
injure slightly.Inhaling liq while vomiting can injure lungs
seriously. Comments: prol onged exposures to 2-methoxyethanol,formed
on exps to water/ humid air,may cause birth defects based on animal
data.
First aid: eyes: immediately flush w/water 15 min. Get medical
attention. Skin: wipe off & flush w/water 15 min. Get med attention
if irritation develops. Inhalation: remove to fresh air. Get
medical aid if ill effects persist. Oral: get med aid. Dont induce
vomiting. Comment: inhaling liq while vomit can seriously injure
lungs, if vomit occurs, keep head below hips (prevent aspiration of
liquid into lungs).
Hcc: f2
boiling pt: b.P. Text: 210f, 99c
vapor pres: 25 mm
vapor density: 3.8
spec gravity: 0.76 @ 77f
appearance and odor: solvent odor, liquid, red
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Moisture or humid air.
stability condition to avoid: exposure to moisture or humid air until
ready to use.
hazardous decomposition products: titanium dioxide, silicon dioxide,
carbon dioxide, and traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures. Contact dow corning if
there area any disposal questions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: naphtha, petroleum, light aliphatic (observe vm&p naphtha
limits)
cas: 8030-30-6
rtecs #: de3030000
fraction by wt: 85%
other rec limits: none specified
osha pel: 300 ppm/400 ppm stel
acgih tlv: 300 ppm
ingred name: tetra (2-methoxyethoxy)-silane (observe limits for
2-methoxyethanol, formed on exposure to water or humid air)
cas: 2157-45-1
fraction by wt: 5%
other rec limits: none specified
osha pel: 25 ppm
acgih tlv: 5 ppm
ingred name: tetrapropyl orthosilicate (observe limits for n-propyl
alcohol, formed on exposure to water or humid air)
cas: 682-01-9
fraction by wt: 5%
other rec limits: none specified
osha pel: 200 ppm/250 ppm stel
acgih tlv: 200 ppm/250 ppm stel
ingred name: tetrabutyl titanate (observe limits for n-butyl alcohol,
formed on exposure to water or humid air)
cas: 5593-70-4
rtecs #: xr1585000
fraction by wt: 5%
other rec limits: none specified
osha pel: 50 ppm ceiling(skin)
acgih tlv: 50 ppm ceiling(skin)
Health hazards acute and chronic: eye: direct contact may cause temp
discomfort w/mild redness & dryness similar to windburn. Skin:
single short exposure causes no known adverse effect.
repeated/prolonged exposure (24-48 hrs) may irri tate. Inhal: no
injury likely from exposure of less than 8 hrs. Oral: large amounts
may cause digestive discomfort.
explanation of carcinogenicity: cured film or articles made from product
may form traces of formaldehyde (carcinogen) if heated in air above
300f.
effects of overexposure: comments: no injury from dust should occur
during reasonable use. If use creates respirable particles, some
respiratory system injury may occur. This product, as with any
chemical, may enhance allergi c conditions on certain people.
medical cond aggravated by exposure: we do not know of any medical
conditions that might be aggravated by exposure to this product.
First aid: eyes: flush immediatley with water. Skin: wipe off and flush
with water. Inhalation: no first aid should be needed. Oral: no
first aid should be needed.
Hcc: n1
vapor pres:
spec gravity: 1.1
solubility in water: less than 0.1
appearance and odor: very littel odor, viscous liquid, clear
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. See conditions to avoid.
stability condition to avoid: water,alcohols,acidic/basic mat'l,many
metals &metallic compounds,when in contact w/prod may liberate
flamm hydrogen gas
hazardous decomposition products: silicon dioxide, carbon dioxide, and
traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determin approved disposal procedures. Contact dow corning if there
are any dispsoal q uestions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethylvinylated and trimethylated silica
cas: 68988-89-6
fraction by wt: 21%
other rec limits: dow: 5 mg/m3 (ceil)
ingred name: dimethyl, methyl hydrogen siloxane copolymer
cas: 68037-59-2
fraction by wt: 34%
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: direct contact irrits slightly w/
redness,swelling.Skin: repeated prolonged contact(24-48
hours)irrits. Repeated,prolonged contact(24-48 hours)irrits
seriously,may burn mildly. Inhale: short vapor e xposure may cause
drowsiness,irrit nose,throat.Degree
effects of overexposure: nk ingest: small amts transfered to the mouth by
fingers during use,etc.,should not injure.Swallowing lrge amts may
injure slightly.Inhaling liq while vomiting can injure lungs
seriously. Comments: prol onged exposures to 2-methoxyethanol,formed
on exps to
First aid: eyes: immediately flush w/water 15 min. Get medical
attention. Skin: wipe off & flush w/water 15 min. Get med attention
if irritation develops. Inhalation: remove to fresh air. Get
medical aid if ill effects persist. Oral: get med aid. Dont induce
vomiti
Hcc: f3
boiling pt: b.P. Text: 210f, 99c
vapor pres: 25.0 @77f
vapor density: 3.8
spec gravity: 0.76 @ 77f
appearance and odor: solvent odor, liquid, red
percent volatiles by volume: 95.0
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Moisture or humid air.
stability condition to avoid: exposure to moisture or humid air until
ready to use.
hazardous decomposition products: titanium dioxide, silicon dioxide,
carbon dioxide, and traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures. Contact dow corning if
there area any disposal questions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: naphtha, petroleum, light aliphatic (observe vm&p naphtha
limits)
cas: 8030-30-6
rtecs #: de3030000
fraction by wt: 85%
other rec limits: none specified
osha pel: 300 ppm/400 ppm stel
acgih tlv: 300 ppm
ingred name: tetra (2-methoxyethoxy)-silane (observe limits for 2-
methoxyethanol, formed on exposure to water or humid air)
cas: 2157-45-1
fraction by wt: 5%
other rec limits: none specified
osha pel: 25 ppm
acgih tlv: 5 ppm
ingred name: tetrapropyl orthosilicate (observe limits for n-propyl
alcohol, formed on exposure to water or humid air)
cas: 682-01-9
fraction by wt: 5%
other rec limits: none specified
osha pel: 200 ppm/250 ppm stel
acgih tlv: 200 ppm/250 ppm stel
ingred name: tetrabutyl titanate (observe limits for n-butyl alcohol,
formed on exposure to water or humid air)
cas: 5593-70-4
rtecs #: xr1585000
fraction by wt: 5%
other rec limits: none specified
osha pel: 50 ppm ceiling(skin)
acgih tlv: 50 ppm ceiling(skin)
Health hazards acute and chronic: eye: direct contact may cause temp
discomfort w/mild redness & dryness similar to windburn. Skin:
single short exposure causes no known adverse effect.
repeated/prolonged exposure (24-48 hrs) may irri tate. Inhal: no
injury likely from exposure of less th
explanation of carcinogenicity: cured film or articles made from product
may form traces of formaldehyde (carcinogen) if heated in air above
300f.
effects of overexposure: comments: no injury from dust should occur
during reasonable use. If use creates respirable particles, some
respiratory system injury may occur. This product, as with any
chemical, may enhance allergi c conditions on certain people.
medical cond aggravated by exposure: we do not know of any medical
conditions that might be aggravated by exposure to this product.
First aid: eyes: flush immediatley with water. Skin: wipe off and flush
with water. Inhalation: no first aid should be needed. Oral: no
first aid should be needed.
Hcc: n1
vapor pres:
spec gravity: 1.1
solubility in water: less than 0.1
appearance and odor: very littel odor, viscous liquid, clear
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. See conditions to avoid.
stability condition to avoid: water,alcohols,acidic/basic mat'l,many
metals &metallic compounds,when in contact w/prod may liberate
flamm hydrogen gas
hazardous decomposition products: silicon dioxide, carbon dioxide, and
traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determin approved disposal procedures. Contact dow corning if there
are any dispsoal q uestions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethylvinylated and trimethylated silica
cas: 68988-89-6
fraction by wt: 21%
other rec limits: dow: 5 mg/m3 (ceil)
ingred name: dimethyl, methyl hydrogen siloxane copolymer
cas: 68037-59-2
fraction by wt: 34%
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: temporary discomfort w/mild
redness & dryness, similar to windburn. Ingest: digestive
discomfort.
First aid: eye: immed flush w/water.
Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
vapor pres: ne
vapor density: ne
spec gravity: 1.14
ph: na
viscosity: 800 poises
solubility in water: none
appearance and odor: white viscous liquid.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizers.
stability condition to avoid: none
hazardous decomposition products: formaldehyde, carbon oxides, traces of
incompletely burned carbon compounds, silicon dioxide.
Waste disposal methods: disposal may be governmentally regulated.
observe all applicable local/state/federal waste management
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 3.0%
other rec limits: none recommended
osha pel: 5 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: trimethylated silica
cas: 68909-20-6
fraction by wt: 27.0%
other rec limits: 5 mg/m3 ceiling
ingred name: dimethylvinylated & trimethylated silica
cas: 68988-89-6
fraction by wt: 8.0%
other rec limits: 5 mg/m3 ceiling
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: temporary discomfort w/mild
redness & dryness, similar to windburn. Ingest: digestive
discomfort.
First aid: eye: immed flush w/water.
Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
vapor pres:
vapor density: ne
spec gravity: 0.99
ph: na
viscosity: 3200 cst
solubility in water: ne
appearance and odor: white liquid.
percent volatiles by volume: 2.0
Stability indicator/materials to avoid: yes
oxidizers.
stability condition to avoid: none
hazardous decomposition products: formaldehyde, hydrogen, carbon oxides,
traces of incompletely burned carbon compounds & silicon dioxide.
Waste disposal methods: disposal may be regulated. Observe all
applicable local/state/federal waste management regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethyl methylhydrogen siloxane
cas: 68037-59-2
fraction by wt: 34.0%
other rec limits: none recommended
ingred name: dimethylvinylated & trimethylated silica
cas: 68988-89-6
fraction by wt: 20.0%
other rec limits: 5 mg/m3 3 ceiling
Health hazards acute and chronic: eye: direct contact irritates slightly
with redness and swelling. Skin: a single relatively short
exposure (less than 24 hours) irritates. repeated prolonged
contact (24 to 48 hours) irritates seri ously, may burn mildly.
inhalation: short vapor exposure may cause drowsiness and irritate
nose and throat. degree of effects depends on concentration and
length of exposure. oral: small amounts transferred to the mouth
by fingers during use etc. Should not injure. swallowing large
amounts may injure slightly. inhaling liquid while vomiting can
injure lungs seriously.
effects of overexposure: prolonged overexposures to 2methoxyethano
formed on exposure to water or humid air, may cause birth defects
based on animal data.
First aid: eyes: immediately flush with water for 15 minutes. get
medical attention. skin: wipe off and flush with water for 15
minutes. get medical attention if irritation develops.
inhalation: remove to fresh air. Get medical attention if ill
effects persist. oral: get medical attention. do not induce
vomiting. comment: inhaling liquid while vomiting can injure
lungs seriously. if vomiting o ccurs keep head below hips to
prvent aspiration of liquid into lungs.
Boiling pt: =404.4c, 760.F
b.P. Text: 760mmhg
vapor pres: 25mmhg
vapor density: 3.8
volatile org content %: 95
spec gravity: 0.76
appearance and odor: red liquid/ solvent odor
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction, moisture or humid air
stability condition to avoid: exposure to moisture or humid air until
ready to use.
hazardous decomposition products: titanium dioxide, silicon dioxide,
carbon dioxide, and traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures. contact dow corning if
there are any disposal questions.
Ingred name: tetrapropyl orthosilicate
cas: 682-01-9
= wt: 5.
osha pel: 200 ppm
osha stel: 250 ppm
acgih tlv: 200 ppm
acgih stel: 250 ppm
ingred name: tetrabutyl titanate
cas: 5593-70-4
rtecs #: xr1585000
= wt: 5.
osha pel: 50 ppm
acgih tlv: 50 ppm
ingred name: tetra (2 methoxyethoxy)
cas: 2157-45-1
= wt: 5.
osha pel: 25ppm
acgih tlv: 5 ppm
ingred name: water
cas: 7732-18-5
rtecs #: zc0110000
= wt: 1.
osha pel: 100ppm
ingred name: naphtha petroleum
= wt: 85.
osha pel: 300
osha stel: 400
acgih tlv: 300
Ld50 lc50 mixture: none
health hazards acute and chronic: none
effects of overexposure: eye: direct contact irritates slightly with
redness and swelling. Skin: a single relatively short exposure
(less than 24 hours) irritates. Inhalation: short vapor exposure
may cause drowsiness and irr itate nose and throat. Oral: small
amounts transferred to the mouth by fingers during use. Etc. Should
not injure. Swallowing large amounts may injure slightly.
medical cond aggravated by exposure: none
First aid: eyes: flush with water for 15 minutes.Get medicl attention.
skin: flush with water for 15 minutes. Get medical attention.
inhalation: remove to fresh air. Get medical attention. Oral: get
medical at tention.
Boiling pt: =98.9c, 210.F
melt/freeze pt: m.P/f.P text: none
decomp temp: decomp text: none
vapor pres: (at 77 deg f/25 deg c)
vapor density: 3.8
spec gravity: 0.76
appearance and odor: color: solvent odor, liquid. Red
Stability indicator/materials to avoid: yes
oxidizing material can cause a eraction moisture or humid air.
stability condition to avoid: exposure to moisture or humid air until
ready to use.
hazardous decomposition products: titanium dioxide, silicon dioxide,
carbon dioxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: all local, state and federal regulations
concerning health and pollution be reviewed to determine approved
disposal procedures.
Ingred name: naphtha petroleum
= wt: 85.
ingred name: tetra (2 methoxyethoxy)
cas: 002157-45-1
= wt: 5.
ingred name: tetrapropyl orthosilicate
cas: 000682-01-9
= wt: 5.
ingred name: tetrabutyl titanate
cas: 005593-70-4
= wt: 5.