Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Sealing Compound

NSN: 8030-00-152-0013 | Model: AMS-S-8802

A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.

NSN Properties and Flags
NATO Stock Number
8030-00-152-0013
DEMIL
NO
Physical Form
Paste
Quantity Within Each Unit Package
4.500 ounces
Specific Usage Design
For aircraft integral fuel tanks and fuel cell cavities
Features Provided
Separate catalyst
Rated Drying Time
40.000 hours
Special Features
Service temperature range of minus 65 degrees f to plus 250 degrees f; polysulfide; 2 hour working time
Material
Rubber synthetic
Supplementary Features
4-1/2 ounce in 6 ounce cartridge
Specification Data
81343-ams-s-8802 professional/industrial association standard
Nondefinitive Specification/std Data
2 type and b-2 class
Recent Solicitations
Solicitation Return by Date Buyer Code Quantity
SPE8ES16T0208 2015-10-14 PEPCE 1741 CA
SPE8ES16T0016 2015-10-13 PEPCE 1386 CA
SPE8E515T6220 2015-04-16 PEPCF 1313 CA

Inventory Check

The last inventory check on this NSN was done on 11/30/2021. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 156
  • New Surplus: 10
  • As Removed: 2
  • Serviceable: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8030-00-152-0013 Datasheet

Supply Class (FSC):
Preservative And Sealing Compounds
Cross Reference:
  • AMS-S-8802
  • PR-1440 B-2
  • FR-1072
  • WS-8020 B-2
  • MC-236
  • CS3204 B-2
  • AC-236 B-2
  • AMS-S-8802 TY2CLB-2
  • P/S 890 B-2
  • EC-801
  • MIL-S-8802 TY2CLB-2
  • MIL-S-8802
Cage Codes:
  • Society Of Automotive Engineers Inc (CAGE 81343)
  • Desoto International, Inc. Prc (CAGE 83574)
  • Hb Fuller North America (CAGE 26348)
  • Royal Adhesives & Sealants Llc (CAGE 4YBA4)
  • Morton Intl Inc (CAGE 0U317)
  • Flamemaster Corporation, The (CAGE 14439)
  • 3m Company (CAGE 1DWR5)
  • 3m Company (CAGE 04963)
  • General Services Administration (CAGE 80244)
  • Military Specifications (CAGE 81349)
Schedule B & Trade:
  • Schedule B: 3214100010 (NAICS 325520)

    Caulking compounds

  • SITC: 53354

    Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations

  • End Use: 13210

    Shingles, molding, wallboard

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149610 - Caulking/glaziers compounds noi

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • LTL:

    T - 55.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    G
  • Quantity per pack
    12
  • Unit of Measure
    Ca
  • Shelf Life
    9 mo.
  • Classification Control
    U
  • MGMT_CTL
    J2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $42.04 to $70.07..
Does NSN 8030-00-152-0013 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, General Services Administration, Bulgaria, Brazil, Spain, Singapore, Australia, New Zealand, Republic Of Korea, Greece, and Turkey
What is the NIIN of NSN 8030-00-152-0013?
001520013 or 00-152-0013
Does NSN 8030-00-152-0013 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8030-00-152-0013?
Solicitation SPE8ES16T0208 for qty 1741 on 10/09/2015
When was this national stock number assigned to the federal catalog?
Feb 10, 1971
MSDS

Material Safety

MSDS BDCSN GC-408 CLASS B

Hazards

Effects of overexposure: may cause skin or eye irritation upon contact

First Aid

First aid: wash hands thoroughly. Flush eyes copiously w/water. Give
emetic if ingested.

Chemical Properties

Hcc: d1
spec gravity: 1.5
solubility in water: negligible
appearance and odor: off white to gray semi-solid

Reactivity

Stability indicator/materials to avoid: yes
strong bases & oxidizing agents
stability condition to avoid: store below 80f.

hazardous decomposition products: so*2,h*2s, other sulfur compounds

Proper Disposal

Waste disposal methods: dispose iaw fed., state & local codes.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polysulfide polymer(lp-polysulfide polymer)
fraction by wt: 57.5%

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 30.3%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 11.1%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

ingred name: stearic acid
cas: 57-11-4
rtecs #: wi2800000
fraction by wt: 0.7%

ingred name: thiram (sara iii)
cas: 137-26-8
rtecs #: jo1400000
fraction by wt: 0.16%
osha pel: 5 mg/m3
acgih tlv: 1 mg/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs

MSDS BDCSP GC-408,CLASS B,SEALING COMPOUND

Hazards

Effects of overexposure: may cause skin or eye irritation;do not
ingest;inhal: may affect some persons.

First Aid

First aid: inhal: remove to fresh air,give cpr if needed;skin/eyes;flush
w lg amts h*2o(use soap in skin);ingest: give emetic.Call dr.

Chemical Properties

Hcc: d1
spec gravity: 1.5
solubility in water: slight
appearance and odor: off white,grem when mixed;mercaptan odor.

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: temperatures over 300f
hazardous decomposition products: so*2,h*2s,other sulfur

Proper Disposal

Waste disposal methods: considered by mfg. To be non-hazardous
trash.Dispose in full regulatory compliance.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide (as manganese)
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 50.0%
osha pel: c,5 mg/m3/1 fume twa
acgih tlv: 5 mg/m3 dust/1 fume

ingred name: p-terphenyl(terphenyl-biphenyl,plasticizer)
cas: 92-94-4
rtecs #: wz6475000
fraction by wt: 47.0%
acgih tlv: 1 ppm

ingred name: guanidine, 1,3-diphenyl(diphenyl guanidine)
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: 3.0%

MSDS BDCSQ EC-801 INDUSTRIAL SEALANT (B-2)

Hazards

Effects of overexposure: eye: irrit.Skin: defatting/dermatitis.Vapors:
headache,nausea & vomiting.

First Aid

First aid: eye: flush with water 15 min,call physician.Skin: wash with
soap and water.Inhalation: remove to fresh air.

Chemical Properties

Hcc: d1
spec gravity: 1.36
solubility in water: slight
appearance and odor: black,sulfur odor
percent volatiles by volume: 3

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: co,co2,sulfur compounds

Proper Disposal

Waste disposal methods: may be disposed of in a sanitary landfill
according to local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum base solvent
fraction by wt: 3.0%
acgih tlv: unk

ingred name: polysulfide rubber (mfr's msds shows this ingred + niosh
3,4,& 5 + silica pigm.+ h*2o= 97
fraction by wt: unk
acgih tlv: unk

ingred name: phenolic resin
fraction by wt: unk
acgih tlv: unk

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: unk
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192

ingred name: magnesium acetate(mfr's msds shows this ingred.+ niosh
2,3,& 4 + silica pigm.+ h*2o = 97)
cas: 142-72-3
rtecs #: ai5600000
fraction by wt: unk
acgih tlv: unk

MSDS BDCSR EC-801A ACCELERATOR (CLASS A&B)

Hazards

Effects of overexposure: eye: irritation. Skin: irritation. Prolonged
contact may prod systemic problems from absorption.

First Aid

First aid: eye: flush with water 15 min,call a physician. Skin: wash with
soap and water. Launder contaminated clothng before reuse.

Chemical Properties

Hcc: d1
boiling pt: b.P. Text: >600f/315c
vapor pres:
spec gravity: 2.8
solubility in water: negligible
appearance and odor: brown paste - slight odor

Reactivity

Stability indicator/materials to avoid: yes
contact with reducing agents.

hazardous decomposition products: co,co2,& smoke particals.

Proper Disposal

Waste disposal methods: dispose in a secure landfill at a hazardous
waste management facility. Epa hazardous waste number d-0008.

comply with local,state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lead peroxide (lead dioxide), (osha pel from 29cfr
1910.1025)
cas: 1309-60-0
rtecs #: og0700000
fraction by wt:
osha pel: 0.05 mg/m3 (pb)
acgih tlv: 0.15 mg/m3(pb); 8990

ingred name: fatty acid bodying agent

ingred name: terphenyl plasticizer

MSDS BDCSS CS 3204, CLASS B-2, MIL-S-8802D, PART A

Hazards

Effects of overexposure: avoid eye contact or prolonged skin contact.

First Aid

First aid: eye: immediately flush w/water for 15 minutes. Call md if
necessary. Skin: wash thoroughly w/mild soap & water.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: 450f
vapor pres: 2.

vapor density: 3.1
spec gravity: 1.42
evaporation rate & reference: 0.02
solubility in water: negligible
appearance and odor: off white paste, polysulfide odor.

percent volatiles by volume: 4.

Reactivity

Stability indicator/materials to avoid: yes
sulfuric, nitric, & hydrochloric acids.

hazardous decomposition products: none

Proper Disposal

Waste disposal methods: sanitary landfill in accordance w/local, state,
& federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 4%.

osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: lp-32 liquid polysulfide polymer (mfg-thiokol corporation,
chemical division)

MSDS BDCST CS 3204,CLASS B-2,MIL-S-8802D,PART B

Hazards

Effects of overexposure: acute-none known to mfr: chronic-manganese
poisoning affecting the central nervous system.

First Aid

First aid: eye: immediately flush w/water at least 15 minutes. Call md.

skin: wash thoroughly w/soap & water.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: 995f
spec gravity: 4.2
solubility in water: negligible
appearance and odor: fine black powder-odorless

Reactivity

Stability indicator/materials to avoid: yes
do not heat or rub w/easily oxidizable material.

Proper Disposal

Waste disposal methods: dispose in accordance w/local, state, and
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide (as manganese)
cas: 1313-13-9
rtecs #: op0350000
osha pel: c,5 mg/m3/1 fume twa
acgih tlv: 5 mg/m3 dust/1 fume

MSDS BDCSV SEALING COMPOUND,POLYSULFIDE

Chemical Properties

Hcc: f4
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: catalyst
fraction by wt: 15%

ingred name: vehicle
fraction by wt: 85%

MSDS BHFYB PR-1440 CLASS B,PART B - POLYSULFIDE RUBBER

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product may be irritating and may
cause liver and/or kidney damage. It also may sensitize allergic
reactions.

explanation of carcinogenicity: mfr claims no compound in this product
is listed by iarc, ntp, or osha as a carcinogen.

effects of overexposure: eye: irritation,burning. Skin: irritation. May
cause skin rash in sensitized individuals. Inhaled: respiratory
irritation. ingested: nausea,vomiting,g/i pain & distress, and
possible liver and/or kidney damage.

medical cond aggravated by exposure: sensitized people are at increased
risk when using this product.

First Aid

First aid: eye: flush with water 15 min. Skin: remove contaminated
clothing. Wash with soap & water. Launder clothing before reuse.

inhaled: remove to fresh air. Restore breathing. Get medical care.

ingested: do not induce vomiting. Give two glasses of water and get
immediate medical attention. (give nothing by mouth if unconscious)
- if any irritation is severe or persists, get medical care.

Chemical Properties

Hcc: n1
spec gravity: 1.60
solubility in water: negligible
appearance and odor: not described on msds by mfr
percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: carbon monoxide, carbon dioxide,
sulfur dioxide, hydrogen sulfide, possible formaldehyde.

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state,local regulations.

mfr states that product may be disposed as ordinary refuse.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: phenol formaldehyde resin
cas: 9003-35-4

MSDS BJZRX FR-1072 BASE COMPONENT

Hazards

Health hazards acute and chronic: moderate irritation to eyes and skin.

First Aid

First aid: skin: wash affected area with soap and water. Eyes: flush
immediately with large amounts of water for 15 minutes. Call a
physician. Inhalation: remove to fresh air. Restore breathing if
necessary.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: >300f,>149c
decomp temp: decomp text: >400f,>204c
vapor density: 1
spec gravity: 1.5
viscosity: 1 m cps
solubility in water: insoluble
appearance and odor: heavy, white paste; slight aromatic.

percent volatiles by volume: 5

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: avoid contact with strong acids or bases.

hazardous decomposition products: combustion will produce carbon
monoxide and carbon dioxide.

Proper Disposal

Waste disposal methods: material contains no raw materials with known
levels of tclp constituents. Incinerate or dispose of in approved
landfill.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polysulfide polymer
cas: 68611-50-7
fraction by wt: 60-70%

ingred name: toluene (sara iii)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
osha pel: 200 ppm/150 stel
acgih tlv: 50 ppm; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 20-30%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192

ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt:
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii)
cas: 78-93-3
rtecs #: el6475000
fraction by wt:
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

MSDS BKMDN PR-1440, PART A

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes/skin: irritation. Inhalation:
although the main hazard of manganese compounds is by breathing
dust, ingestion should be avoided as a precaution against manganese
poisoning. Symptoms of manganese poisoning are weakness and
sleepiness.

First Aid

First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sy mptoms are present, consult a physician. Ingestion:
consult a physician.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: na
vapor pres: na
vapor density: na
spec gravity: 1.95
evaporation rate & reference: unk
solubility in water: negligible

Reactivity

Stability indicator/materials to avoid: yes
easily oxidizable materials.

hazardous decomposition products: oxides of carbon and nitrogen,
manganese compounds.

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide (expos lim based on airborne particles.

in this product mat'l is fully encapsulated-no airborne part)
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60%
other rec limits: none specified
osha pel: 5 mg/m3 stel ceiling
acgih tlv: 5 mg/m3

ingred name: 1,3 diphenyl guanidine (dpg)
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: < 5%
other rec limits: none specified

MSDS BKPGG PR-1440 PART B

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritation. Skin: irritation.

may cause allergic skin rash in sensitized individuals. Inhalation:
throat irritation. Ingestion: may cause nausea, vomiting, kidney
and liver damage.

First Aid

First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sy mptoms are present, consult a physician. Ingestion: give
milk or water to drink. Consult a physician.

Chemical Properties

Hcc: n1
spec gravity: 1.60
solubility in water: negligible

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: so2, co, co2, h2s and possibly
formaldehyde.

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: phenol polymer with formaldehyde (phenolic resin)
cas: 9003-35-4
fraction by wt:
other rec limits: none specified

ingred name: voc, g/l (mixed): 0
rtecs #: 9999999vo
other rec limits: none specified

MSDS BPRCV FR-1072 CURING AGENT

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no anticipated chronic effects.

explanation of carcinogenicity: this product does not contain regulated
levels of ntp, iarc, or osha listed carcinogens.

First Aid

First aid: eyes: flush immediately with water for 15 minutes. Skin: wash
material from skin with soap and water.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: >300f,>149c
decomp temp: decomp text: >400f,>204c
spec gravity: 1.8 (water=1)
viscosity: 120,000 cps
solubility in water: insoluble
appearance and odor: black mobile paste, no odor
percent volatiles by volume: 1

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: avoid exposure to heat.

hazardous decomposition products: incomplete combustion can yield low
molecular weight hydrocarbons, carbon monoxide, and nitrogen
compounds.

Proper Disposal

Waste disposal methods: this product does not meet the definition of
hazardous waste under the epa hazardous waste regulations 40 cfr
261. State or local hazardous regulations may apply if different
from federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 50-60%
other rec limits: none specified
acgih tlv: 5 mg/m3 as dust

ingred name: hydrogenated terphenyls
cas: 61788-32-7
rtecs #: wz6535000
fraction by wt: 30-40%
other rec limits: none specified

ingred name: diphenyl guanidine
cas: 102-06-7
rtecs #: mf0875000
fraction by wt:
other rec limits: none specified

MSDS BRNHF CS 3204, PART A

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: not established. Possible skin
irritation after prolonged contact, with resulting dermatitis. Not
considered to be a primary skin irritant.

effects of overexposure: skin or eye irritation.

medical cond aggravated by exposure: none known.

First Aid

First aid: eyes: flush with large amounts of water, consult physician.

skin: wash with soap and water. Ingestion: induce vomiting, consult
physician.

Chemical Properties

Hcc: b3
melt/freeze pt: m.P/f.P text: liq@rm temp
vapor pres: nil
vapor density: nil
spec gravity: 1.52 (water=1)
ph: 8.5
viscosity: 12,000 poises
evaporation rate & reference: nil (bu ac=1)
solubility in water: negligible
appearance and odor: white paste, polysulfide odor.

percent volatiles by volume: 3.0

Reactivity

Stability indicator/materials to avoid: yes
avoid strong oxidizing agents and strong acids.

stability condition to avoid: open flame
hazardous decomposition products: h2s, co, co2, so2, smoke

Proper Disposal

Waste disposal methods: react w/curing agent & dispose as solid waste
per federal, state & local regs. Incineration &/or landfill - react
with part b & dispose as non-hazardous waste. Dispose per federal,
state & local regul ations. Epa hazardous waste #: cad062064746.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: liquid polysulfide polymer
cas: 68611-50-7
other rec limits: none specified

ingred name: voc: 9 grams/liter
rtecs #: 9999999vo
other rec limits: none specified

MSDS BRNHG CS 3204, PART B

Hazards

Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: impairment of central nervous system.

effects of overexposure: sluggishness, sleeplessness and/or weakness in
the legs.

medical cond aggravated by exposure: none known

First Aid

First aid: eyes: flush with large amounts of water, contact physicina.

skin: wash with soap and water.

Chemical Properties

Hcc: b3
melt/freeze pt: m.P/f.P text: liq@rm temp
spec gravity: 2.0 (water=1)
ph: 9.0
viscosity: 1000 poises
evaporation rate & reference: nil (bu ac=1)
solubility in water: negligible
appearance and odor: black paste, oily odor
percent volatiles by volume: 2.0

Reactivity

Stability indicator/materials to avoid: yes
reducing agents and combustibles, h2s, potassium azide
stability condition to avoid: none
hazardous decomposition products: co2, co, no, no2, dust

Proper Disposal

Waste disposal methods: react with base component and dispose as solid
waste according to federal, state, and local regulations. Epa
hazardous waste number: cad062064746.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide (dust) (exposure limits based on dust
particles.Particles wetted out therfore particles won't result)
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 65%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3

ingred name: voc: 1 gm/liter
rtecs #: 9999999vo
other rec limits: none specified

MSDS BRQMK THIOKOL MC-236 BASE

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: eye: other than mechanical irritation,
no adverse effects expected. Skin: irritation can occur following
prolonged or repeated contact. Inhalation: under normal conditions
of use no adverse effects ex pected. Ingestion: can cause nausea,
vomiting, and gastrointestinal upset.

explanation of carcinogenicity: crystalline silica: significant incidence
of adenocarcinomas & squamous cell carcinomas of lung induce in
rats exposed.

effects of overexposure: depending on route, frequency & duration of
exposure toxicity may effect the following organs or systems.

respiratory system, immune system (e.G. Allergic reactions).

medical cond aggravated by exposure: exposure to this product is not
expected to contribute to, worsen, or aggravate any existing
medical conditions.

First Aid

First aid: eye: flush w/water 15 min.If irrit,see dr. Skin: remove contam
cloth & shoes.Wash contam skin w/soap & water.If irrit, see dr.Wash
contam cloth separately before reuse.Inhal: remove to fresh air. Get
imm ed med aid.If no breath,give artif resp(mouth to
mouth).Ingest: get med aid,unless advised,induce vomit (ipecac w/2
glasses water/finger down throat).Nothing by mouth to
unconscious,drowsy,no gag refl

Chemical Properties

Hcc: n1
spec gravity: 1.61
viscosity: 9000-14000 p
solubility in water: insoluble
appearance and odor: light colored, off white paste, sulfide odor

Reactivity

Stability indicator/materials to avoid: yes
none known
hazardous decomposition products: phenolics, oxides of nitrogen, oxides
of sulfur, smoke, soot, toxic fumes (co & co2), hydrogen sulfide.

Proper Disposal

Waste disposal methods: don't flush to sewer, stream, other water
bodies. If discarded in original unused form, manage at authorized
facility, in compliance w/fed, state & local regulations. Contact
governmental agencies for guidance. 1)recycle. 2)incinerate.

3)treat.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: limestone/calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
fraction by wt: 30-60%
other rec limits: *15 mg/m3 total part
osha pel: 5 mg/m3 resp fractn*
acgih tlv: 10mg/m3 total partic

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 1-5%
other rec limits: *10 mg/m3 total part
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

ingred name: quartz (crystalline silica)
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 0.36%
other rec limits: none specified
osha pel: see table z3
acgih tlv: 0.1 mg/m3 rdust;9293

MSDS BRQML THIOKIL MC-236 ACCELERATOR

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: mild to moderate irritation.

skin: irritation can occur following prolonged/repeated contact.

contact can cause hypersensitivity (allergic) reactions in
susceptible individuals. Inhalation: dizzi ness, headache,
incoordination. Ingestion: gastrointestinal irritation. Nausea,
vomiting, gastrointestinal upset.

effects of overexposure: depending on the route, frequency, and duration
of exposure toxicity may effect the following organs and/or
systems. Liver, kidney, eye, skin, immune system (allergic
reactions).

medical cond aggravated by exposure: some of the components in this
product may aggravate existing medical conditions. Liver, kidney,
skin, immune system and/or specific chemical allergies.

First Aid

First aid: eye: flush w/water 15 min. If irritation, see dr. Skin:
remove contam clothes & shoes. Wash contam skin w/soap & water. If
irrit, see dr. Inhal: remove to fresh air. If symptoms, get immed
med aid. If not breathing, give artif resp. Ingest: get med aid.

unless advised otherwise, induce vomiting (ipecac/finger down
throat). Give nothing by mouth if person is drowsy, unconscious,
has no gag reflex.

Chemical Properties

Hcc: n1
vapor pres: 0.1 @ 25 c
spec gravity: 2.1 (water=1)
viscosity: 100-500poises
evaporation rate & reference:
solubility in water: slightly soluble
appearance and odor: black paste, phenyl odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents, chemically active metals (e.G., nickel, cobalt, iron,
copper)
hazardous decomposition products: amines, oxides of nitrogen, smoke,
soot, toxic fumes (e.G., carbon dioxide, & carbon monoxide), metal
oxides.

Proper Disposal

Waste disposal methods: if in unused original form, manage at authorized
facility in compliance with federal, state & local requirements. 1)
recycle/rework if feasible. 2) incinerate at authorized facility.

or 3) treat at ac ceptable waste treatment facility.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60-70%
other rec limits: *1 mg/m3;stel 3mg/m3
osha pel: as mn fume: 3 mg/m3
acgih tlv: 5 mg/m3 resp fract *

ingred name: terphenyl, hydrogenated (ld50: oral-rat >10,000 mg/kg)
cas: 61788-32-7
fraction by wt: 10-30%
other rec limits: none specified
osha pel: ceiling 0.5 ppm
acgih tlv: 0.5 ppm, 4.7 mg/m3

ingred name: terphenyl (ld50: oral-rat 13,200 mg/kg)
cas: 26140-60-3
rtecs #: wz6450000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: c 1.0 ppm
acgih tlv: c 0.53 ppm; 9394

ingred name: ethoxylated nonylphenol phosphate (ld50: oral-rat 3630
mg/kg)
cas: 51811-79-1
fraction by wt: 1-5%
other rec limits: none specified

ingred name: diphenylguanidine,1,3- (ld50: oral-rat 507 mg/kg)
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: 1-5%
other rec limits: none specified

ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BVMYR PR-1440 B-2, ACCELERATOR

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: severely irritating.

skin: irritation, irritation on moist skin. Toxic by absorption. May
be sensitizer. Inhalation: dizziness, drowsiness, fatigue. Manganese
pneumonitis, manganese poisoning. Irrit ation, may be absorbed thru
lungs. Ingestion: apathy, insomnia, weakness in legs, muscular
twitching, emotional distress.

First Aid

First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sy mptoms are present consult a physician.Ingestion:
consult a physician.

Chemical Properties

Hcc: c3
boiling pt: b.P. Text: 644f,340c
vapor density: non volatl
spec gravity: 1.97
viscosity: 1220p#6@10rpm
evaporation rate & reference: non volatile
solubility in water: slight
appearance and odor: black paste
percent volatiles by volume: 0.0

Reactivity

Stability indicator/materials to avoid: yes
easily oxidizable materials
stability condition to avoid: not known
hazardous decomposition products: oxides of carbon and nitrogen,
manganese compounds.

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrogenated terphenyls (vapor pressure 1 mm hg)
cas: 61788-32-7
rtecs #: wz6535000
fraction by wt: 31.477%
other rec limits: none recommended
osha pel: 0.5 ppm
acgih tlv: 0.5 ppm

ingred name: carbon black (listed as req'd by 29cfr1910: 1200, full
encapsulated--non hazardous under normal conditions)
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5.673%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3

ingred name: manganese dioxide (sara iii)
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 56.308%
other rec limits: none recommended
osha pel: 5 mg/m3 ceiling
acgih tlv: 5 as mn mg/m3

ingred name: diphenyl guanidine (guanidine,n,n',diphenyl)
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: 3.940%
other rec limits: none recommended

ingred name: voc per epa method 24: 35 g/l (combined part a & b)
rtecs #: 9999999vo
other rec limits: none recommended

MSDS BVMYS PR-1440 B-2, BASE

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause burning, tearing,
reddening. Skin: prolonged exposure may cause drying & cracking of
skin & dermatitis. Inhalation: may cause dizzinesss, drowsiness, &
fatigue. May cause liver & kidne y damage. Ingestion: drowsiness,
dizziness, & nausea. Chronic: disturbance in memory, thinking,
emotions & coordination.

First Aid

First aid: eyes: flush with water. If symptoms persist, consult a
physician. Skin: wash with soap and water. If symptoms persists,
consult a physician. Inhalation: remove to fresh air. If symptoms
are present, c onsult a physician. Ingestion: drink large amounts
of water; induce vomiting; consult a physician.

Chemical Properties

Hcc: c3
boiling pt: b.P. Text: 230 to 350f
vapor density: > air
spec gravity: 1.571
viscosity: 10500p#7@2rpm
evaporation rate & reference: < n-butyl acetate
solubility in water: slight
appearance and odor: beige thixotropic paste
percent volatiles by volume: 3.3

Reactivity

Stability indicator/materials to avoid: yes
none known
stability condition to avoid: not known
hazardous decomposition products: oxides of carbon, sulfur dioxide,
traces of hydrogen sulfide

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: titanium dioxide (listed as req'd by 29 cfr1910.1200, fully
encapsulated, not hazardous under normal use)
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 3.140%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium carbonate(limestone)(listed as req'd by 29cfr
1910: 1200,fully encapsulatd,not hzdous under normal circumstances)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 30.421%
other rec limits: none recommended
osha pel: 15.0 mg/m3
acgih tlv: 10.0 mg/m3

ingred name: toluene (sara iii) (vapor pressure 23 mm hg)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 0.978%
other rec limits: none recommended
osha pel: 100 ppm;stel 150 ppm
acgih tlv: 50 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: polysulfide polymer (non hazardous ingredient)
cas: 68611-50-7
other rec limits: none recommended

ingred name: silica derivatives (non hazardous ingredient)
cas: 67762-90-7
other rec limits: none recommended

ingred name: voc per epa method 24: 35 g/l (combined part a & b)
rtecs #: 9999999vo
other rec limits: none recommended

MSDS BYRQF THIOKOL MC-236 BASE TYPE II

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eyes: may cause mechanical
irritation.Skin: prolonged contact may cause irritation.Ingest: may
cause gi tract irritation.Inhal: no adverse effects
expected.Chronic: may cause allergic reaction.Exposure to
crystalline silica dust may cause silicosis.

explanation of carcinogenicity: crystalline
silica: ntp-ac,iarc-2a.Ethylene
oxide: ntp-ac,iarc-2a,epa-b2.Formaldehyde is lower than reportable
amount.

effects of overexposure: ingest: nausea,vomiting and gastrointestinal
upset.Silicosis: coughing,wheezing,chest pain.

medical cond aggravated by exposure: unlikely to aggrivate existing
medical conditions under normal conditions of use.

First Aid

First aid: skin: remove contaminated clothing;wash with soap and
water.See doctor if irritation develops.Eyes: flush with water for
15 minutes.See doctor if irritation develops.Inhal: remove to fresh
air.Give oxyge n or artificial respiration if needed.Ingest: get
prompt qualified medical attention.Induce vomiting with syrup of
ipecac,followed by 2 glasses water or stick finger down throat.

Chemical Properties

Hcc: v5
spec gravity: 1.61
viscosity: 9000-14000p
solubility in water: insoluble
appearance and odor: not reported.

percent volatiles by volume: 97

Reactivity

Stability indicator/materials to avoid: yes
none specified by manufacturer.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: carbon dioxide,carbon monoxide,oxides
of nitrogen and sulfur,phenolics,hydrogen sulfide.

Proper Disposal

Waste disposal methods: recycle,incinerate or surrender to a waste
treatment facility in accordance with federal,state and local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
fraction by wt: 40.2%
other rec limits: none recommended

ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 2.5%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9495

ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: 0.36%
other rec limits: none recommended
osha pel: see table z-3
acgih tlv: 0.1 mg/m3 rdust;9495

ingred name: non-hazardous ingredients
fraction by wt: 55%
other rec limits: none recommended

ingred name: formaldehyde (sara 302/313) (cercla)
cas: 50-00-0
rtecs #: lp8925000
fraction by wt:
other rec limits: none recommended
osha pel: see 1910.1048
acgih tlv: c 0.3 ppm, a2; 9495
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs

ingred name: ethylene oxide (sara 302/313) (cercla)
cas: 75-21-8
rtecs #: kx2450000
other rec limits: none recommended
osha pel: 1 ppm; see 1910.1047
acgih tlv: 1 ppm, a2; 9495
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs

MSDS BYRQG THIOKOL MC-236 ACCELERATOR

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: **irritant** eyes: may cause mild to
moderate irritation.Skin: may cause irritation or allergic
reactions.Ingest: may cause gi tract irritation.Inhal: may cause
respiratory irritation.Chronic: may damage l iver,kidneys,eyes and
skin and cause allergic reactions.

explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.

effects of
overexposure: inhal: dizziness,headache,incoordination.Ingest: nausea,
vomiting,gastrointestinal upset.

medical cond aggravated by exposure: persons with pre-existing
liver,kidney,skin,immune system disorders or allergies may be at
increased risk from exposure.

First Aid

First aid: skin: remove contaminated clothing;wash with soap and
water.See doctor if irritation develops.Eyes: flush with water for
15 minutes.See doctor if irritation develops.Inhal: remove to fresh
air.Give oxyge n or artificial respiration if needed.Ingest: get
prompt qualified medical attention.Induce vomiting with syrup of
ipecac,followed by 2 glasses water or stick finger down throat.

Chemical Properties

Hcc: v5
vapor pres: 0.1
spec gravity: 2.1
viscosity: 100-500 p
evaporation rate & reference:
solubility in water: slight
appearance and odor: not reported.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents,chemically active metals(nickel,cobalt,iron,copper).

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: carbon dioxide,carbon monoxide,oxides
of nitrogen and metals.

Proper Disposal

Waste disposal methods: recycle,incinerate or surrender to a waste
treatment facility in accordance with federal,state and local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: manganese dioxide
cas: 1313-13-9
rtecs #: op0350000
fraction by wt: 60-70%
other rec limits: none recommended
osha pel: 5 mg mn/m3 ceiling
acgih tlv: 5 mg mn/m3

ingred name: hydrogenated terphenyls
cas: 61788-32-7
rtecs #: wz6535000
fraction by wt: 10-30%
other rec limits: none recommended
osha pel: 0.5 ppm
acgih tlv: 0.5 ppm; 9495

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: c 1.0 ppm
acgih tlv: c 0.53 ppm; 9495

ingred name: polyoxyethylene nonyl phenyl phosphate
cas: 51811-79-1
fraction by wt: 1-5%
other rec limits: none recommended

ingred name: 1,3 diphenyl guanidine,
cas: 102-06-7
rtecs #: mf0875000
fraction by wt: 1-5%
other rec limits: none recommended

ingred name: sodium hydroxide (cercla)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9495
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: non-hazardous ingredients(proprietary ingredients)
fraction by wt: 0.19%
other rec limits: none recommended

MSDS CCJQM POLYSULFIDE RUBBER COMPOUND PR-1440 B-2 #1440B19

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may cause
burning/tearing/reddening. Skin: chronic exposure may cause
drying/cracking/dermatitis. Inhal: may cause
dizziness/drowsiness/fatigue. Liver/kidney damage. Ingest: may
cause drowsiness/ diziness/nausea. Disturbance in memory/thinking
ability/emotions/coordination.

First Aid

First aid: eyes: flush w/water 15 minutes. If symptoms persist call dr.

skin: wash w/soap & water. If symptoms persist call dr. Inhalation:
remove to fresh air. If symptoms persist, call dr. Ingestion: drink
lar ge amounts of water. Induce vomiting. Call dr.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: 230 to 350f
vapor density: >air
spec gravity: 1.571
viscosity: 10,500p7@2rpm
evaporation rate & reference: slower than butyl acitate
appearance and odor: beige thixotropic paste
percent volatiles by volume: 3.3

Reactivity

Stability indicator/materials to avoid: yes
none known.

hazardous decomposition products: oxides of carbon, sulfur dioxide,
traces of hydrogen sulfide.

Proper Disposal

Waste disposal methods: not a hazardous waste according to epa regs.

consult state regs prior to disposal of spillage.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 30.0%
other rec limits: none recommended
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: toluene (sara 313) (cercla) (vp = 23.0)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt:
other rec limits: none recommended
osha pel: 100 ppm/stel 150
acgih tlv: 50 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: polysulfide polymer
cas: 68611-50-7
other rec limits: none recommended

ingred name: voc = 35 g/l
rtecs #: 9999999vo
fraction by wt: na
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant

MSDS CLGPF AC-236 ACCELERATOR

Hazards

Health hazards acute and chronic: emergency overview: may cause allergic
skin reaction and sensitization. Inhalation may cause dizziness.

headache and incoordination. May cause moderate eye irritation. May
cause respiratory tract irri tation. May cause digestive tract
irritation. Ingestion may cause nausea, vomiting, pain, upset
stomach, diarrhea. May cause skin irritation.

effects of overexposure: eye contact: may cause moderate irritation.

skin contact: may cause slight to mild irritation. May cause
allergic skin reactions and sensitization. Inhalation: irritating
to the eyes, nose, and respir atory tract. Can cause dizziness,
headaches, and incoordination. Ingestion: irritating to the mouth,
throat, and stomach. May cause nausea, vomiting, pain, and stomach
upset. `
medical cond aggravated by exposure: liver, kidneys, lungs, and
respiratory system. Skin. Immune systems and/or specific chemical
allergies.

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothing and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. Inhalation:
remove to fresh air. If symptoms develop, seek immediate medical
attention. If not breathing, give artificial respiration.

ingestion: seek medical attention. Immediately induce vomiting,
direct treatment at preventing absorption, administering to
symptoms, supportive therapy.

Chemical Properties

Vapor pres: 0.1mm hg
vapor density: >1
spec gravity: 2.1
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: black paste distinct odor

Reactivity

Y-immediate health hazard, y-delayed health hazard
federal regulatory information: ozone-depleting chemicals-no regulated
ingredients. Sara section 302 extremely hazardous mat-no regulated
ingredients. Sara section 313 toxic chemicals manganese oxide.

chemical listing-listed on the following coun
state regulatory information: pennsylvenia-new jersey r-t-k manganese
oxide 1313-13-9, terphenyl, hydrogenated 61788-32-7,
1,3-diphenylquanidine 102-06-7, terphenyl 26140-60-3, ethoxylated
nonylphenol phosphate51811-79-1, sodium h ydroxide 1310-73-2.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Proper Disposal

Waste disposal methods: disposal: dispose in accordance with all local,
state, and federal regulations. General statements: federal
regulations may apply to empty container. State and/or local
regulations may be different. G eneral recommendations: of the
methods of disposal currently available, it is recommended that an
al ternative be selected according to the following o

Ingredients List

Ingred name: manganese oxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 66.4
osha pel: c5 mg/m3
acgih tlv: 5 mg/m3

ingred name: terphenyl, hydrogenated
cas: 61788-32-7
rtecs #: wz6535000
= wt: 22.7
acgih tlv: 4.9 mg/m3;0.5 ppm

ingred name: 1,3-diphenylguanidine
cas: 102-06-7
rtecs #: mf0875000
= wt: .7

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
= wt: 4.8
osha pel: c9 mg/m3;c1 ppm
acgih stel: c5 mg/m3;c0.53 ppm

ingred name: ethoxylated nonylphenol phosphate
cas: 51811-79-1
code: f
= wt: 2.9

ingred name: sodium hydroxide
cas: 1310-73-2
rtecs #: wb4900000
= wt: 1.4
osha pel: 2 mg/m3
acgih stel: c2 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: non-hazardous and other ingredients below reportable
levels.

= wt: 0.

MSDS CLKFS AC-236 CLASS B BASE

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: lungs and respiratory system.

effects of overexposure: eye contact: may cause mechanical irritation
skin contact: incidental contact is not expected inhalation
(breathing): exposure is unlikely ingestion (swallowing): exposure
is unlikely, may cause n ausea, vomiting, pain, and stomach upset
(e.G., diarrhea)
medical cond aggravated by exposure: lungs and respiratory system

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothin g and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. inhalation
(breathing): remove to fresh air. If symptoms develop, seek
immediate medic al attention. If not breathing, give artificial
respiration. ingestion (swallowing): seek medical attention:
immediately induce vomiting, as directed by medical personnel.

never give anything by mout h to an unconscious person.

Chemical Properties

Spec gravity: 1.61
voc pounds/gallon: 48
voc grams/liter: .4
solubility in water: insoluble
appearance and odor: off white paste and sulfide odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizers, acids
stability condition to avoid: high temperatures
hazardous decomposition products: smoke, soot, and toxic/irritating
fumes (i.E., carbon dioxide, carbon monoxide, etc). Formaldehyde
and/or other aldehydes. Oxides of nitrogen, metallic oxides.

Proper Disposal

Waste disposal methods: dispose of according to applicable local, state
and federal regulations of the methods of disposal currently
available, it is recommended that an alternative be according or
the following order of pre ference. Based upon environmental
acceptability. (1) recycle or rework, if feasible; (2) incinerate
at an authorized facility.

Ingredients List

Ingred name: limestone
cas: 1317-65-3
rtecs #: ev9580000
= wt: 38.5
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
= wt: 3.


ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
= wt: 2.5
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: formaldehyde
cas: 50-00-0
rtecs #: lp8925000
< wt: .1
osha pel: see 1910.1048
acgih stel: c0.37 mg/m3;c0.3 ppm
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs

ingred name: non-hazardous and other ingredients below reportable levels

MSDS CLKHG AC-236 ACCELERATOR

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: chronic effects: liver, kidneys,
nervous system. Blood and/or blood-forming organs. Lungs and
respiratory system. Reproductive system (and reproductive effects).

eyes. Skin. Immune system, (e.G., alle rgic reactions).

effects of overexposure: eye contact: may cause moderate irritation
skin contact: may cause slight to mild irritation. May cause
allergic skin reactions and sensitizations. inhalation
(breathing): irritating to the eyes, no se, and respiratory tract.

can cause dizziness, headache, and incoordination. Ingestion
(swallowing): irritating to the mouth. May cause nausea, vomiting,
pain, and stomach upset (e.G., diarrhea)
medical cond aggravated by exposure: liver, kidneys, lungs and
respiratory system. Skin. Immune system and/or specific chemical
allergies.

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothin g and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. inhalation
(breathing): remove to fresh air. If symptoms develop, seek
immediate medic al attention. If not breathing, give artificial
respiration. ingestion (swallowing): seek medical attention:
immediately induce vomiting, as directed by medical personnel.

never give anything by mout h to an unconscious person.

Chemical Properties

Vapor pres: 0.1 mm hg
vapor density: >1
spec gravity: 2.1
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: black paste and distant odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizers, acids
stability condition to avoid: high temperatures
hazardous decomposition products: smoke, soot, and toxic/irritating
fumes (i.E., carbon dioxide, carbon monoxide, etc). Formaldehyde
and/or other aldehydes. Oxides of nitrogen, metallic oxides.

Proper Disposal

Waste disposal methods: dispose of according to applicable local, state
and federal regulations of the methods of disposal currently
available, it is recommended that an alternative be according or
the following order of pre ference. Based upon environmental
acceptability. (1) recycle or rework, if feasible; (2) incinerate
at an authorized facility.

Ingredients List

Ingred name: manganese oxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 66.4
osha pel: c5 mg/m3
acgih tlv: 5 mg/m3

ingred name: hydrogenated terphenyl
cas: 61788-32-7
rtecs #: wz6535000
= wt: 22.7
acgih tlv: 4.9 mg/m3;0.5 ppm

ingred name: 1,3-diphenylguanidine
cas: 102-06-7
rtecs #: mf0875000
= wt: .7

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
= wt: 4.8
osha pel: c9 mg/m3;c1 ppm
acgih stel: c5 mg/m3;c0.53 ppm

ingred name: ethoxylated nonylphenol phosphate
cas: 51811-79-1
= wt: 4.8

ingred name: sodium hydroxide
cas: 1310-73-2
rtecs #: wb4900000
= wt: 1.4
osha pel: 2 mg/m3
acgih stel: c2 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS CLKQV AC-236 ACCELERATOR

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may cause moderate
irritation. skin contact: may caus slight to mild irritation. May
cause allergic skin reactions and sensitization. inhalation
(breathing): irritating to the eyes, no se, and respiratory tract.

can cause dizziness, headaches, and incoordination. ingestion
(swallowing): irritating to the mouth, throat, and stomach. May
cause nausea, vomiting, pain, and stomach upse t. Target
organs/chronic effects: liver, kidneys, nervous system, blood
and/or blood-forming organs. Lungs and respiratory system.

reproductive system (and reproductive effects). Eyes, skin, immune
system, (allergic reactions).

effects of overexposure: emergency overview: may cause allergic skin
reaction and sensitization. Inhalation may cause dizziness,
headache and incoordination. May cause moderate eye irritation. May
cause respiratory tract irr itation. May cause digestive tract
irritation. Ingestion may cause nausea, vomiting, pain, upset
stomach, diarhea, may cause skin irritation.

medical cond aggravated by exposure: liver, kidneys, lungs and
respiratory system. Skin, immune systems and/or specific chemical
allergies.

First Aid

First aid: eye contact: immediately flush eyes with plenty of water for
at least 15 minutes. Get medical attention if irritation persists.

skin contact: immediately flush with water. Remove contaminated
clothi ng and shoes. Get medical attention if irritation persists.

professionally wash clothing and shoes before re-use. inhalation
(breathing): remove to fresh air. If symptoms develop, seek
immediate medi cal attention. If not breathing, give artificial
respiration. ingestion: seek medical attetion. Immediately induce
vomiting, as directed by medical personnel. Never give anything by
mouth to an uncon scious person.

Chemical Properties

Vapor pres: 0.1 mm hg
vapor density: >1
spec gravity: 2.1
solubility in water: insoluble
appearance and odor: black paste distinct odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizers, acids.

stability condition to avoid: high temperatures

Proper Disposal

Waste disposal methods: collection and disposal: stop discharge, if safe
to do so. Use proper protective equipment. Cover spills with
absorbent clay or sawdust and place in closed chemical waste
containers. Dispose of accord ing to applicable local, state and
federal regulations. reporting: spills of this material in exces s
of a components rq must be reported to the natio

Ingredients List

Ingred name: manganese oxide
cas: 1313-13-9
rtecs #: op0350000
= wt: 66.4
osha pel: c5 mg/m3
acgih tlv: 5 mg/m3

ingred name: terphenyl, hydrogenated
cas: 61788-32-7
rtecs #: wz6535000
= wt: 22.7
acgih tlv: 4.9 mg/m3;0.5 ppm

ingred name: 1,3-diphenylguanidine
cas: 102-06-7
rtecs #: mf0875000
= wt: .7

ingred name: terphenyl
cas: 26140-60-3
rtecs #: wz6450000
= wt: 4.8
osha pel: c9 mg/m3;c1 ppm
acgih stel: c5 mg/m3;c0.53 ppm

ingred name: ethoxylated nonylphenol phosphate
cas: 51811-79-1
code: f
= wt: 2.9

ingred name: sodium hydroxide
cas: 1310-73-2
rtecs #: wb4900000
= wt: 1.4
osha pel: 2 mg/m3
acgih stel: c2 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: non-hazardous and other ingredients below reportable levels