Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Sealing Compound

NSN: 8030-00-275-8110 | Model: A-A-59293
ITAR Registered seal

A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.

NSN Properties and Flags
NATO Stock Number
8030-00-275-8110
DEMIL
Yes - ITAR Controlled
Physical Form
Paste
Quantity Within Each Unit Package
1.000 quarts
Specific Usage Design
For sealing metal to metal or glass to metal in optical or fire control instruments
Features Provided
Separate catalyst
Rated Drying Time
48.000 hours
Volatile Organic Compound In Grams Per Liter
13.0
Environmental Attribute Code
Low volatile organic compound - household consumer products
Special Features
Low temperature flexible; polysulfide; 3 hour working time
Color
Black
Material
Rubber synthetic
Supplementary Features
24 fluid ounce base and required amount of curing agent in separate containers
Recent Solicitations
Solicitation Return by Date Buyer Code Quantity
SPE8ES20T1208 2019-12-09 PEPCE 38 KT
SPE8ES19T5009 2019-05-07 PEPCE 57 KT
SPE8ES19T3795 2019-03-18 PEPCE 51 KT
SPE8ES19T1466 2018-12-04 PEPCE 45 KT
SPE8ES19Q0015 2018-10-09 PEPCE 275 KT
SPE8ES17T6606 2017-09-11 PEPCE 60 KT
SPE8ES17T6054 2017-08-21 PEPCE 56 KT
SPE8ES17T2497 2017-03-01 PEPCE 70 KT
SPE8ES17T1990 2017-02-06 PEPCE 58 KT
SPE8E815Q0345 2015-05-12 PEPCA 213 KT

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8030-00-275-8110 Datasheet

Supply Class (FSC):
Preservative And Sealing Compounds
Cross Reference:
  • A-A-59293
  • CS3202 CLB
  • MIL-S-11031
Cage Codes:
  • Federal Commercial Item Description (CAGE 58536)
  • Flamemaster Corporation, The (CAGE 14439)
  • Military Specifications (CAGE 81349)
Schedule B & Trade:
  • Schedule B: 3214100010 (NAICS 325520)

    Caulking compounds

  • SITC: 53354

    Glazier's putty; grafting putty; resin cement, caulking compounds and other mas tics painter's fillings; nonrefractory surfacing preparations

  • End Use: 13210

    Shingles, molding, wallboard

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

ENAC

GQ - Household consumer products

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149610 - Caulking/glaziers compounds noi

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • TCC:

    R - Flammable liquids, un class 3 (flammable liquids label)

  • LTL:

    T - 55.0

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    G
  • Quantity per pack
    24
  • Unit of Measure
    Kt
  • Shelf Life
    12 mo.
  • Classification Control
    U
  • MGMT_CTL
    J2200X-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $549.42 to $915.71..
Does NSN 8030-00-275-8110 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, General Services Administration, Austria, Spain, Singapore, Australia, Canada, New Zealand, Republic Of Korea, Greece, and Turkey
What is the NIIN of NSN 8030-00-275-8110?
002758110 or 00-275-8110
Does NSN 8030-00-275-8110 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8030-00-275-8110?
Solicitation SPE8ES20T1208 for qty 38 on 12/02/2019
When was this national stock number assigned to the federal catalog?
Jan 01, 1963
MSDS

Material Safety

MSDS BJNKV GOLD BOND POLYSULFIDE SEALANT, X-854

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes & skin: irritant. Inhalation:
possible respirtory tract irritant and mucous membrane. Ingestion:
possible nausea/vomiting. excessive absorption of lead.

effects of overexposure: cramping-usually in lower abodomen; muscular
weakness.

medical cond aggravated by exposure: kidney disease, anemia and
pregnancy. May aggrevate pre-existing generally recognized medical
disorders.

First Aid

First aid: inhalation: remove subject to fresh air. Eye: flush with
plenty of water for 15 minutes. Get immediate medical attention.

skin: wash with soap and water. Ingestion: induce vomiting if
victim is consci ous, get immediate medical attention.

Chemical Properties

Melt/freeze pt: m.P/f.P text: nif
spec gravity: 1.546 (h20=1)
viscosity: 10-35
solubility in water: insoluble
appearance and odor: black viscous liquid & sulfide odor
percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: temperature in excess of 480 f(250 c)
hazardous decomposition products: carbon dioxide, carbon monoxide

Proper Disposal

Waste disposal methods: lead containing product-segregate and return to
smelter for reclamation or disposal in accordance with local,
state, and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polysulfide polymer
cas: 68611-50-7
other rec limits: avoid strong oxidizi

ingred name: calcium carbonate (marble) (limestone)
cas: 1317-65-3
rtecs #: ev9580000
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192

ingred name: glycol ether
cas: 111-46-6
rtecs #: id5950000
other rec limits: none specified

ingred name: butyl benzyl phthalate (sara iii)
cas: 85-68-7
rtecs #: th9990000
other rec limits: none specified
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs

ingred name: catalyst contains lead peroxide
cas: 1309-60-0
rtecs #: og0700000
other rec limits: none specified

MSDS CBTMG CS3202 CLASS B BLACK, PART A

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: non-established. Possible skin
irritation after prolonged contact w/resulting dermatitis. Not
considered to be a primary skin irritant.

effects of overexposure: skin or eye irritation.

First Aid

First aid: eyes: flush w/large amounts water. Consult physician. Skin:
wash w/soap & water. Ingestion: induce vomiting. Consult physician.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text:
vapor pres: nil
vapor density: nil
spec gravity: 1.45
evaporation rate & reference: 1.0 (buac=1)
solubility in water: negligible
appearance and odor: black paste, polysulfide odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids
stability condition to avoid: open flame
hazardous decomposition products: h2s, co, co2, so2, smoke

Proper Disposal

Waste disposal methods: react w/curing agent & dispose of as solid waste
per federal, state, local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: liquid polysulfide polymer
cas: 68611-50-7
other rec limits: none recommended

ingred name: no hazardous ingredients per 29 cfr 1910.1200.

other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant

MSDS CBTMH CS3202 PART B

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: weakness, stooper. Chronic:
kidney damage, anemia, reproductive effects.

effects of overexposure: headache, muscle, joint pain. Neuromuscular
dysfunction.

medical cond aggravated by exposure: anemia, kidney disease, pregnancy.

First Aid

First aid: ingestion: induce vomiting. Consult dr immediately. Eyes:
flush w/large amts water & contact dr.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: 644f,340c
melt/freeze pt: m.P/f.P text:
vapor pres: nil
vapor density: na
spec gravity: 3.0
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: brown paste, oily odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizable materials
stability condition to avoid: high heat
hazardous decomposition products: lead oxide dust & organics

Proper Disposal

Waste disposal methods: return to smelter for reclaimation or react
w/base & dispose according to federal, state, local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lead dioxide (in this product airborne particles won't
result from normal use)
cas: 1309-60-0
rtecs #: og0700000
fraction by wt: 64.0%
other rec limits: none recommended
osha pel: 0.05 mg/m3
acgih tlv: 0.15 mg/m3

ingred name: lead oxide (in this product airborne particles won't result
from normal use)
cas: 1317-36-8
rtecs #: og1750000
fraction by wt: 6.0%
other rec limits: none recommended
osha pel: 0.05 mg/m3
acgih tlv: 0.15 mg/m3

ingred name: voc = 1.0 g/l
rtecs #: 9999999vo
fraction by wt: na
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant

MSDS CJZPK CS 3202 CLASS B(BLACK) (PART A)

Hazards

Health hazards acute and chronic: possible skin irritation after
prolonged contact, with resulting dermatitis. not considered to be
a primary skin irritant.

effects of overexposure: skin or irritation.

First Aid

First aid: eyes-flush with large amounts of water, consult physician.

skin-wash with soap and water. ingestion- induce vomiting,
consult physician.

Chemical Properties

Vapor pres: nil
vapor density: nil
spec gravity: 1.50
ph: 8.5
viscosity: 11,000 poises
evaporation rate & reference: 1
solubility in water: neglegable
appearance and odor: black paste, polysulfide odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents and strong acids
stability condition to avoid: open flame
hazardous decomposition products: h2s, co, co2, so2, smoke.

Proper Disposal

Waste disposal methods: react with curing agent and dispose as hazardous
waste, non-mix , non-hazardous.

Ingredients List

Ingred name: liquid polysulfide polymer
cas: 68611-50-7
= wt: 65.

MSDS CJZPL CS 3202 (PART B)

Hazards

Health hazards acute and chronic: weakness, stupor. chronic: kidney
damage, anemia reproductive defects.

effects of overexposure: headache, muscle and noint pain, neuromuscular
dysfunction.

medical cond aggravated by exposure: anemia, kidney disease, pregnancy.

First Aid

First aid: first aid: ingestion- induce vomiting, consulta physician at
once. Eye contact-flush with large amounts of water.

Chemical Properties

Boiling pt: =340.C, 644.F
b.P. Text: 340c vehicle
vapor pres: nil
vapor density: nil
spec gravity: 3
ph: 6.8
viscosity: 11,000 poises
evaporation rate & reference: 1
solubility in water: neglegable
appearance and odor: brown paste, oily odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents
hazardous decomposition products: lead oxide dust and organics.

Proper Disposal

Waste disposal methods: return to smelter for reclamation or react with
base and dispose accordingto federal, state and local regulations.

Ingredients List

Ingred name: liquid polysulfide polymer
cas: 68611-50-7
= wt: 65.


ingred name: lead dioxide
cas: 1309-60-0
rtecs #: og0700000
= wt: 64.

osha pel: 0.05 mg/m3
acgih tlv: 0.05 mg/m3

ingred name: lead oxide
cas: 1317-36-8
rtecs #: og1750000
= wt: 6.

osha pel: 0.05 mg/m3
acgih tlv: 0.05 mg/m3

MSDS CKFZK CREST 1420 A POLYSULFIDE

Hazards


route of entry inds - inhalation: yes
skin: yes
ingestion: yes
signs and symptions of overexposure: eye contact: eye contact may cause slight
irritation. Skin contact: no hazard expected in normal industrial use.

inhalation: no inhalation hazard expected in normal workplace use.

ingestion: ha rmful ifd swallowed. ingestion is not an expected route of
entry in industrial or commercial uses.Black paste, with polysulfide odor.

low hazard for usual industrial or commercial handling.

first aid: eye contact: flush eyes immediattely with large amount of water for
at least 15 minutes holding eyelids open while flushing. get prompt medical
attention. skin contact: flush contaminated skin wi th large amounts of
water while removing contaminated clothing. wash affected skin areas with
soap and water. get medical attention if symptoms occur. inhalation:
this material is not likely to be hazardous by inhalation. however, if
exposed to excessive levels of vapor or mist, remove to fresh air, give
oxygen if breathing is difficult, and get immediate medical attention. *

Chemical Properties


vapor density: >air
spec gravity: 1.45
evaporation rate & reference: slower than ether
solubility in water: insoluble
appearance and odor: black paste/polysulfide odor

HAZCOM Label


product id: crest 1420 a polysulfide
cage: 34469
company name: crest products corp
street: 2000 s susan st
city: santa ana ca
zipcode: 92704-4415
health emergency phone: 1-814-763-2345
label required ind: y
date of label review: 04/03/2000
status code: a
origination code: g

Transportation

=======================================================
responsible party cage: 34469
trans id no: 152211
product id: crest 1420 a polysulfide
msds prepared date: 10/21/1996
review date: 03/01/2000
mfn: 1
multiple kit number: 0
unit of issue: kt
container qty: g
type of container: bx

Reactivity

=======================================================
stability indicator: yes
stability condition to avoid: high temperatures.

materials to avoid: acids, caustics, amines, ammonia, halogens and isocyanates.

hazardous decomposition products: co2, co, oxides of sulfur, hydrogen sulfide
hazardous polymerization indicator: no

Proper Disposal


spill release procedures: avoid breathing vapors. notify appropriate
authorities if necessary. contain and remove with inert absorbent material.

avoid contact. keep non-essential personnel away from spill area. before
att empting cleanup, refer to hazard caution information in other sections.

waste disposal methods: disposal should be done in accordance with federal
(40cfr part 261), state and local environmental control regulations. If
waste is determined to be hazardous, use licenced hazardous waste transporte
re and disposal facility.

handling and storage precautions: store only in well ventilated areas. Keep
containers closed when not in use.

other precautions: keep closure tight and container upright to prevent leakage.

avoid skin and eye contact. Wash thoroughly after handling. do not handle
until all safety precautions have been read and understood. e mpty
containers should not be re-used. Use with adequate ventilation.

MSDS CKFZL SARA SECTION 313: THIS PRODUCT CONTAINS THE FOLLOWING SUBST

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
effects of overexposure: eye contact: eye contact may cause irritation.

skin contact: may cause skin irritation. may cause dermatitis
inhalation: may cause headache and nausea. no inhalation hzard
expected during normal workplace use. ingestion: harmful ifd
swallowed. Ingestion is not an expected route of entry in
industrial or commercial uses. other hazards: brown paste, with
oily odor, may cause skin and e ye irritation.

First Aid

First aid: eye contact: flush eyes immediattely with large amount of
water for at least 15 minutes holding eyelids open while flushing.

get prompt medical attention. skin contact: flush contaminated
skin wi th large amounts of water while removing contaminated
clothing. wash affected skin areas with soap and water. get
medical attention if symptoms occur. inhalation: this material
is not likely to be hazardous by inhalation. however, if exposed
to excessive levels of vapor or mist, remove to fresh air, give
oxygen if breathing is difficult, and get immediate medical
attention. *

Chemical Properties

Vapor density: >air
spec gravity: 2.99
evaporation rate & reference: slower than ether
solubility in water: insoluble
appearance and odor: brown paste/oily odor
percent volatiles by volume: 0.0

Reactivity

Stability indicator/materials to avoid: yes
strong acids, bases, and strong oxidizers.

stability condition to avoid: high temperatures.

hazardous decomposition products: co2, co, lead fume

Proper Disposal

Waste disposal methods: disposal should be done in accordance with
federal (40cfr part 261), state and local environmental control
regulations. if waste is determined to be hazardous, use licenced
hazardous waste transporte re and disposal facility.

Ingredients List

Ingred name: lead dioxide
cas: 1309-60-0
rtecs #: og0700000
< wt: 65.

osha pel: 0.05 ppm
acgih tlv: 0.05 ppm

ingred name: lead oxide
cas: 1317-36-8
rtecs #: og1750000
< wt: 10.

osha pel: 0.05 ppm
acgih tlv: 0.05 ppm

MSDS CKTMP CREST 1420A

Hazards


route of entry inds - inhalation: yes
skin: yes
ingestion: yes
effects of exposure: harmful if swallowed. Ingestion is not an expected route
of entry in industrial or commericial uses. Chronic hazards: none expected
under normal working conditions.

signs and symptions of overexposure: eye contact may cause slight irritation.

skin contact: no hazard expected in normal industrial use. No inhalation
hazard expected during normal workplace use.

first aid: eye contact: flush immediately with large amount of water for at
least 15 min holding eyelids open while flushing.Skin contact: flush
contaminated skin with large amounts of water while removing contam inated
clothing.Wash affected skin areas with soap/ water. Inhalation: move person to
fresh air.Restore and support continued breathing.If breathing is difficult,
give oxygen.Ingestion: if swallowed, do not induce vomiting.Give victim one
or two glasses of water or milk.Call a physician or poison control center
immediately for further instructions. Never give anything by mouth to an
unconsious perso n.Obtain medical attention in all cases.

Chemical Properties


vapor density: + air
spec gravity: 1.45
evaporation rate & reference: slower than ether
solubility in water: insoluable
appearance and odor: black paste polysulfide odor
percent volatiles by volume: 0.0

HAZCOM Label


product id: crest 1420a
cage: 30676
company name: lord corporation, chemical products division
street: 2000 west grandview blvd
city: erie pa
zipcode: 16514-0038
health emergency phone: 814-763-2345
label required ind: y
date of label review: 09/29/2000
status code: a
origination code: g
hazard and precautions: harmful if swallowed. Ingestion is not an expected
route of entry in industrial or commericial uses. Chronic hazards: none
expected under normal working conditions.

Reactivity

=======================================================
stability indicator: yes
stability condition to avoid: high tempatures.

materials to avoid: acids, caustics, amines, ammonia, halogens and isocyanates
hazardous decomposition products: carbon monoxide, carbon dioxide, oxides of
sulfur, hydrogen sulfide
hazardous polymerization indicator: no

Proper Disposal


spill release procedures: keep non-essential personel a safe distance away from
the spill area. Remove all sources of ignition. Avoid breathing vapors. Use
self contained breathing equipment. Notify appropiate authiorities if
necessary. Contain and remove with inert absorbent material and non-sparking
tools. Avoid contact. Before attempting cleanup, refer to hazard information
in other sections of the msds form.

waste disposal methods: disposal should be done in accordance with federal,
state and local enviormental control regulations. If waste is determined to
be hazardous, use licensed hazardous waste transporter and disposal faci
lity.

handling and storage precautions: store only in ventilated areas.Close
container when not in use.Keep container upright to prevent leakage. Do not
handle unti lall saftey precautions have been read and understood. Do not
weld/ flame-c ut an empty drum. Use of this product should comply with the
osha lead standard.

MSDS CKTMQ CREST 1420B

Hazards


route of entry inds - inhalation: yes
skin: yes
ingestion: yes
effects of exposure: harmful if swallowed. Ingestion is not an expected route
of entry in industrial or commericial uses. May cause liver or kidney damage.

overexposure to lead in this product can damage the nervous, urin ary,
gastrointestinal, blood. Blood forming and reproductive systems. Chronic skin
contact may cause dermititis.

signs and symptions of overexposure: may cause eye irritation. May cause skin
irritation. May cause dermatitis. Inhalation may couse headache and nausea.

no inhalation hazard expected during normal workplace use.

first aid: eye contact: flush immediately with large amount of water for at
least 15 min holding eyelids open while flushing.Skin contact: flush
contaminated skin with large amounts of water while removing contam inated
clothing.Wash affected skin areas with soap/ water. Inhalation: move person to
fresh air.Restore and support continued breathing.If breathing is difficult,
give oxygen.Ingestion: if swallowed, do not induce vomiting.Give victim one
or two glasses of water or milk.Call a physician or poison control center
immediately for further instructions. Never give anything by mouth to an
unconsious perso n.Obtain medical attention in all cases.

Chemical Properties


vapor density: + air
spec gravity: 2.99
evaporation rate & reference: slower than ether
solubility in water: insoluable
appearance and odor: brown paste oily odor
percent volatiles by volume: 0.0

HAZCOM Label


product id: crest 1420b
cage: 30676
company name: lord corporation, chemical products division
street: 2000 west grandview blvd
city: erie pa
zipcode: 16514-0038
health emergency phone: 814-763-2345
label required ind: y
date of label review: 09/29/2000
status code: a
origination code: g
hazard and precautions: harmful if swallowed. Ingestion is not an expected
route of entry in industrial or commericial uses. May cause liver or kidney
damage. Overexposure to lead in this product can damage the nervous, urin
ary, gastrointestinal, blood. Blood forming and reproductive systems. Chronic
skin contact may cause dermititis.

Transportation

=======================================================
responsible party cage: 30676
trans id no: 154809
product id: crest 1420b
msds prepared date: 01/11/1996
review date: 08/24/2000
mfn: 3
multiple kit number: 0
unit of issue: kt
container qty: g
type of container: bx

Reactivity

=======================================================
stability indicator: yes
stability condition to avoid: high tempatures. Sources of ignition.

materials to avoid: strong acids, bases and strong oxidizers
hazardous decomposition products: carbon monoxide, carbon dioxide, lead fume
hazardous polymerization indicator: no

Proper Disposal


spill release procedures: keep non-essential personel a safe distance away from
the spill area. Remove all sources of ignition. Avoid breathing vapors. Use
self contained breathing equipment. Notify appropiate authiorities if
necessary. Contain and remove with inert absorbent material and non-sparking
tools. Avoid contact. Before attempting cleanup, refer to hazard information
in other sections of the msds form.

waste disposal methods: disposal should be done in accordance with federal,
state and local enviormental control regulations. If waste is determined to
be hazardous, use licensed hazardous waste transporter and disposal faci
lity.

handling and storage precautions: store only in ventilated areas. Keep from
freezing.Close container when not in use.Keep container upright to prevent
leakage. Do not handle unti lall saftey precautions have been read and
understood. do not weld/ flame-cut an empty drum. Use of this product should
comply with the osha lead standard.

MSDS CLBVZ SEALING COMPOUND

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
health hazards acute and chronic: non established, possible sign
irritation after prolonged contact, with resulting dermatitis, not
considered to be a primary skin irritant.

effects of overexposure: skin or eye irritation.

First Aid

First aid: eyes: flush with large amounts of water, consult physician.

skin: wash with soap and water. Ingestion: induce vomiting, consult
physician.

Chemical Properties

Melt/freeze pt: m.P/f.P text: liquid at room
vapor pres: (mm hg) nil
vapor density: (air=1)
spec gravity: (h20=1) 1.45
ph: 8.5
viscosity: 11,000 poises
evaporation rate & reference: (butyl acetate=1) 1
solubility in water: negligible
appearance and odor: black paste,
percent volatiles by volume: 0.6

Reactivity

Stability indicator/materials to avoid: yes
avoid strong oxidizing agents and strong acids.

stability condition to avoid: open flame
conditions to avoid polymerization: will not occur

Proper Disposal

Waste disposal methods: react with curing agent and dispose as a solid
waste per federal, state and local regulations.

Ingredients List

Ingred name: propane, 1,2,3-trichloro-, polymer with
1,1'-.(.Methylenebis(oxy).).Bis.(.2-chloroethane.). And sodium
sulfide (na2(sx)), reduced
cas: 68611-50-7
= wt: 68.