Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Sealing Compound

NSN: 8030-00-476-5299 | Model: 90-006 1/8

A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.

NSN Properties and Flags
NATO Stock Number
8030-00-476-5299
DEMIL
NO
Physical Form
Paste
Quantity Within Each Unit Package
6 oz base and required amount of curing agent
Specific Usage Design
For use as thermal barrier, insulative coating and pressurization sealant for moderate heat flux environments
Rated Working Time
7-1/2 minutes
Features Provided
Separate catalyst
Rated Drying Time
0.500 hours
Color
Red
Material
Silicone

Inventory Check

The last inventory check on this NSN was done on 02/02/2024. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 11
  • As Removed: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8030-00-476-5299 Datasheet

Supply Class (FSC):
Preservative And Sealing Compounds
Cross Reference:
  • 90-006 1/8
  • RTV88
  • RTV-88 W/9891 CATALYST
  • RTV-90 WITH STO
Cage Codes:
  • Dow Corning Corporation (CAGE 71984)
  • Momentive Performance Materials Inc. (CAGE 01139)
Schedule B & Trade:
  • Schedule B: 3214100010 (NAICS 325520)

    Caulking compounds

  • SITC: 53354

    Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations

  • End Use: 13210

    Shingles, molding, wallboard

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149610 - Caulking/glaziers compounds noi

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • LTL:

    T - 55.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    V
  • Quantity per pack
    No qup
  • Unit of Measure
    Kt
  • Shelf Life
    6 mo.
  • Classification Control
    U
  • MGMT_CTL
    J2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $69.05 to $115.09..
Does NSN 8030-00-476-5299 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Brazil, Spain, Denmark, and Greece
What is the NIIN of NSN 8030-00-476-5299?
004765299 or 00-476-5299
Does NSN 8030-00-476-5299 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8030-00-476-5299?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jun 11, 1971
MSDS

Material Safety

MSDS BDZSZ RTV88

Hazards

Ld50 lc50 mixture: oral ld50: >1000(rat)mg/kg;inhal(sup dat)
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: see signs & symptoms of overexposure
section .

explanation of carcinogenicity: not applicable
effects of overexposure: acute: ingestion-may cause stomach discomfort.

skin-plant experience has shown that skin hazard is not applicable
in this form. Inhalation-none known. Eye-may cause mild eye
irritation. Chronic: liver & kidney damage.

medical cond aggravated by exposure: none known.

First Aid

First aid: eye: imme flush w/lge amts of wtr for at least 15 min & get
med attn if irri persists.Inges: if swallowed do not induce
vomiting,give lge quan of wtr to drink & get med attn,never give
anything by mouth to an unconscious person. Skin: wash w/soap &
wtr. Inhalation: remove to fresh air. Support breathing (give
o*2/artificial respiration)).

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: >500f/>260c
melt/freeze pt: m.P/f.P text: n/applicabl
decomp temp: decomp text: n/k
vapor pres: negligible
vapor density: negligible
spec gravity: 1.50
ph: n/appl
evaporation rate & reference: negligible
solubility in water: insoluble
appearance and odor: n/k
percent volatiles by volume:
corrosion rate:

Reactivity

Stability indicator/materials to avoid: yes
none known
stability condition to avoid: none known
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide

Proper Disposal

Waste disposal methods: disposal should be made in accordance
w/federal,state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: ethyl silicate
cas: 78-10-4
rtecs #: vv9450000
fraction by wt:
other rec limits: 10 ppm
osha pel: 100 ppm
acgih tlv: 10 ppm; 9293

MSDS BDZTB 90-006 SEALANT

Hazards

Effects of overexposure: may cause temporary discomfort to eyes.

First Aid

First aid: flush w/water.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: >300f,149c
vapor pres:
spec gravity: 1.35
evaporation rate & reference:
solubility in water:
appearance and odor: paste-like,very little odor
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
not known
hazardous decomposition products: metl oxides,co*2 & trces of
incompletely burned c products.

Proper Disposal

Waste disposal methods: can be landfilled or burned iaw local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: non hazardous ingredients
fraction by wt: 100%.

MSDS BSHJZ DOW CORNING (R) 93-006 BASE

Hazards

Health hazards acute and chronic: prolonged quartz/cristobalite dust
overexposure may cause silicosis. Chromium oxide is a skin
sensitizer. The above listed potential effects of overexposure are
based on actual data, results of studie s performed upon similar
compositions, component data &/or expert review of the product.

effects of overexposure: eye: direct contact irritates slightly with
redness & swelling. Skin: a single short exposures (
irritate. Repeated/prolonged contact (24 to 48 hrs) may irritate
moderately. Repeated con tact may cause allergic skin
sensitization. Inhalation: dust may injure the respiratory system.

medical cond aggravated by exposure: overexposure to any chemical may
result in enhancement of pre-existing adverse medical conditions
and allergic reactions.

First Aid

First aid: eyes: immediately flush with water for 15 minutes. Skin: wipe
off and flush with water for 15 minutes. Get medical attention if
reaction develops. Inhalation: no first aid should be needed. Oral:
no f irst aid should be needed.

Chemical Properties

Hcc: n1
vapor pres: < 5mm @25c
spec gravity: 1.3
solubility in water:
appearance and odor: very little odor, paste-like, gray.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

hazardous decomposition products: metal oxides, silicon dioxide, carbon
dioxide & traces of icompletely burned carbon products.

Proper Disposal

Waste disposal methods: dispose of in accordance with all local, state &
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: ethyl polysilicate
cas: 11099-06-2
fraction by wt: 1%
other rec limits: for ethanol
osha pel: 1000 ppm
acgih tlv: 1000 ppm

ingred name: silica, amorphous-diatomaceous earth (pigment)
cas: 68855-54-9
rtecs #: hl8600000
fraction by wt: < 3%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3(total dust)

ingred name: cristobalite
cas: 14464-46-1
rtecs #: vv7325000
fraction by wt: < 10%
other rec limits: none specified
osha pel: 0.05mg/m3(resp dust)
acgih tlv: 0.05mg/m3(resp dust)

ingred name: zinc oxide
cas: 1314-13-2
rtecs #: zh4810000
fraction by wt: 25%
other rec limits: 5mg/m3-resp fraction
osha pel: 10 mg/m3(total dust)
acgih tlv: 5 mg/m3 (total dust)

ingred name: quartz (sara 313)
cas: 14808-60-7
rtecs #: vv7330000
fraction by wt: < 0.7%
other rec limits: none specified
osha pel: 0.1 mg/m3(resp dust)
acgih tlv: 0.1 mg/m3(resp dust)

ingred name: chromium oxide (cr203)
cas: 1308-38-9
rtecs #: gb6475000
fraction by wt: 0.3%
other rec limits: none specified
osha pel: 0.5 mg(cr)/m3
acgih tlv: 0.5 mg(cr)/m3

MSDS BSHKB DOW CORNING (R) 90-006-1/8 CATALYST

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: direct contact irritates. May be
serious with redness, swelling & some corneal injury lasting
several days to a week. Effects may be delayed several hours. Skin:
prolonged exposure (24-48 hours) may burn seriously. Short periods
of contact (< 1 hr) irritate seriously. Effects may be delayed
several hours.

effects of overexposure: overexposure may injure internally if absorbed.

inhalation: vapor overexposure may irritate eyes, nose, & throat.

oral: small amounts transferred to the mouth by fingers during use,
etc., may injure s lightly. Swallowing large amounts may injure
seriously.

medical cond aggravated by exposure: overexposure to any chemical may
result in enhancement of pre-existing adverse medical conditions
and allergic reactions.

First Aid

First aid: eyes: immediately flush with water for 15 minutes. Get
medical attention. Skin: wipe off and flush with water for 15
minutes. Get medical attention if ill effects develop. Inhalation:
remove to fresh air. Get medical attention if ill effects persist.

oral: get medical attention.

Chemical Properties

Hcc: n1
vapor pres: < 5mm @25c
spec gravity: 1.2
solubility in water:
appearance and odor: very little odor, paste-like, light beige

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: exposure to air--tin catalysts typically
degrade in performance upon prolonged exposure; acetic acid vapors
form
hazardous decomposition products: metal oxides, silicon dioxide, carbon
dioxide & traces of incompletely burned carbon products.

Proper Disposal

Waste disposal methods: dispose of in accordance with all local, state &
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: dibutyltin diacetate
cas: 1067-33-0
rtecs #: wh6880000
fraction by wt: 9%
other rec limits: none specified
osha pel: skin: 0.1 mg(tn)/m3
acgih tlv: skin: 0.1 mg(tn)/m3

ingred name: calcium carbonate
cas: 471-34-1
rtecs #: ff9335000
fraction by wt: 18%
other rec limits: 5mg/m3 resp fraction
osha pel: 15 mg/m3(total dust)
acgih tlv: 10 mg/m3(total dust)