NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 8040-00-004-2337 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| No recorded entities for this stock number. | |
| What is the NIIN of NSN 8040-00-004-2337? | |
| 000042337 or 00-004-2337 | |
| Does NSN 8040-00-004-2337 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-004-2337? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jun 07, 1972 | |
Ld50 lc50 mixture: ld50 (oral rat) is 11,400 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: this mixture has not been tested as a
whole. Acute-brief contact may irritate skin or cause a rash.
chronic-prolonged &/or repeated skin contact may result in allergc
sensitization.
explanation of carcinogenicity: there may be some residual amounts of
epichlorohydtin which is used to make component 1. It is listed by
ntp & iarc.
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization
First aid: if irritation persists or is severe, get medical attention.
eye: flush w/water for 15 min. Skin: wash thoroughly w/soap & water.
inhaled: remove from exposure. Aid or restore breathing as needed.
ingeste d: drink plenty of water. Get immediate medical attention.
Hcc: t3
nrc/state lic num: none
boiling pt: b.P. Text: undefined
decomp temp: decomp text: not tested
vapor pres: nil
vapor density: >1
spec gravity: 1.1
ph: undef.
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: amber colored paste
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids
stability condition to avoid: mfr gave no information on msds.
hazardous decomposition products: carbon monoxide & nox, aldehydes,
acids & undetermined organics
conditions to avoid polymerization: avoid mixing in batches >1 pound or
use immediately. Do not heat mixed adhesive. May cause hazardous
exotherm.
Waste disposal methods: product, as waste, is not a rcra hazardous
waste. Incineratio in an epa approved rincinerator is a preferred
disposal practice. Chemical additions etc. May alter it to change
its character or local or state regulations may differ from
federal regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a-epichlorohydrin copolymer
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 100%
ingred name: volatile organic content =
rtecs #: 9999999vo
other rec limits: none recommended
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: acute-mixture has not been tested as a
whole. Components are poisonous by ingestion with some components
toxic by skin absorption. It is corrosive possibly causing burns to
skin & eyes. chronic-breat hing of vapors may cause delayed or
serious injury to the lliver & spleen (toxic hepatitis).
explanation of carcinogenicity: some components are listed as possible
carcinogens by iarc, ntp & osha. See individual reports for
details.
effects of overexposure: possible burns to eyes & skin. Irritation to
upper respiratory tract. Skin will turn yellow/brown at site of
contact.
medical cond aggravated by exposure: skin sensitization.
First aid: if irritation persists or is severe, get medical attention.
eye: flush w/water for 15 min. Skin: wash thoroughly w/soap & water.
inhaled: remove from exposure. Aid or restore breathing as needed.
ingeste d: drink plenty of water. Get immediate medical attention.
Hcc: t3
nrc/state lic num: none
boiling pt: b.P. Text: undefined
decomp temp: decomp text: not tested
vapor pres: not tested
vapor density: not tested
spec gravity: 1.15
appearance and odor: reddish black liquid.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids
stability condition to avoid: none.
hazardous decomposition products: carbon monoxide & nox, aldehydes,
acids & undetermined organics
conditions to avoid polymerization: avoid mixing in batches >1 pound or
use immediately. Do not heat mixed adhesive. May cause hazardous
exotherm.
Waste disposal methods: product, as waste, is not a rcra hazardous
waste. Incineratio in an epa approved rincinerator is a preferred
disposal practice. Chemical additions etc. May alter it to change
its character or local or state regulations may differ from
federal regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: m-phenylenediamine
cas: 108-45-2
rtecs #: ss7700000
fraction by wt: 40-70%
acgih tlv: 0.1 mg/m3; 9495
ingred name: 2,4-diaminoanisole (sara 313)
cas: 615-05-4
rtecs #: bz8580500
fraction by wt: 30-60%
ingred name: 4,4'-methylene dianiline (sara 313)
cas: 101-77-9
rtecs #: by5425000
fraction by wt: 10-30%
acgih tlv: s; 0.1 ppm; a2; 9495
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: yes
osha: no
effects of exposure: brief contact may irrit skin or cause a rash. Repeated or
prolonged skin contact may result in allergic sensitization. Carcinogenicity
note: bisphenol a/epichlorohydrin epoxy resin has exhibited mutag enicity in
bacteria.
explanation of carcinogenicity: possible residual amounts epichlorohydrin which
is an iarc group 2 a material. (possible human carcinogen)
signs and symptions of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.
b.P. Text: undefined
decomp text: untested
vapor pres: nil
vapor density: >1
spec gravity: 1.1 g/ml
viscosity: 100-300 brk.
solubility in water: negligible.
appearance and odor: amber colored paste
corrosion rate: na
product id: hysol ea 946 (as9184018) part a
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: brief contact may irrit skin or cause a rash. Repeated
or prolonged skin contact may result in allergic sensitization.
carcinogenicity note: bisphenol a/epichlorohydrin epoxy resin has exhibited
mutag enicity in bacteria.
skin rash, irritation.
=======================================================
responsible party cage: 33564
trans id no: 43315
product id: hysol ea 946 (as9184018) part a
msds prepared date: 07/01/1992
review date: 02/20/1996
mfn: 3
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: qt
container qty: 0
type of container: unknown
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a&b in batches >1lb & heating
mixture >75f.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
conditions to avoid polymerization: no information provided by mfg.
spill release procedures: wear protective clothing, gloves & safety
glasses. Scrape up or shovel into dot approved waste containers.
waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/otherwise
altering matl may make waste management infor herein incomplete/inaccurate/
inappropriate.Consult state/loc regulations.
handling and storage precautions: refrigerated storage is recommended to
maintain product quality. This product may be stored @ room temp (77f) for up
to 12 months.
other precautions: follow curing schedule as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
>75f unless curing surfaces to be bonded.