Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
The last inventory check on this NSN was done on 03/08/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $3,010.31 to $5,017.19.. | |
Does NSN 8040-00-116-1437 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Spain, Canada, Germany, Republic Of Korea, Greece, Turkey, and Nato Maintenance and Supply Agency | |
What is the NIIN of NSN 8040-00-116-1437? | |
001161437 or 00-116-1437 | |
Does NSN 8040-00-116-1437 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8040-00-116-1437? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Feb 14, 1973 |
ld50 lc50 mixture: none specified by manufacturer.
route of entry inds - inhalation: yes
skin: yes
ingestion: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye: mild irrit: signs/symps can include redness, swelling,
pain & tearing. Vaps from heated matl may cause irrit. Dust created by
cutting, grinding, sanding/machining may cause irrit. Skin: allergic sk in
rxn: signs/symps can include redness, swelling, blistering & itching.
mild skin irrit (after prlng/ (efts of overexp)
explanation of carcinogenicity: not relevant
signs and symptions of overexposure: hlth haz: rptd cont): signs/symps can incl
redness, swell & itch. Inhal: vaps of heated matl may cause resp sys
irrit. Dust from cutting, grinding, sanding/machining may cause irrit of resp
sys. Ingest: m ay cause irrit of gi tiss: signs/symps can incl pain, vomit,
abdom tenderness, naus, blood in vomitus & blood in feces.
medical cond aggravated by exposure: none specified by manufacturer.
first aid: eye: immediately flush w/large amounts of water for at least 15
minutes. Get immediate medical attention. Skin: flush w/large amounts of
water. If irritation persists, get medical attention. Inhal: remov e person to
fresh air. If signs/symptoms continue, call md. Ingest: do not induce
vomiting. Drink two glasses of water. Call md.
hcc: n1
solubility in water: not soluble
appearance and odor: film on white liner, gray; essentially no odor.
percent volatiles by volume: 0 (wt)
product id: scotch-weld struct film, af-126-2, ty 1 cl 2
cage: 0f0u5
company name: pacebrook ltd
street: 15 gosditch st
city: cirencester glos gl7 2ag nk
zipcode: 00000
country: uk
health emergency phone: 612-733-1110
label required ind: y
date of label review: 04/18/1994
status code: c
label date: 04/18/1994
origination code: g
eye protection ind: yes
skin protection ind: yes
signal word: warning
respiratory protection ind: yes
health hazard: moderate
contact hazard: moderate
fire hazard: none
=======================================================
responsible party cage: 0f0u5
trans id no: 48465
product id: scotch-weld struct film, af-126-2, ty 1 cl 2
msds prepared date: 09/14/1992
review date: 06/14/1995
mfn: 1
multiple kit number: 0
review ind: y
unit of issue: ro
container qty: 0
additional data: not regulated for shipping.
Hazard and precautions: acute: eye: mild irrit: signs/symps can incl redness,
swell, pain & tearing. Vaps from heated matl may cause irrit. Dust
created by cutting, grinding, sanding/machining may cause irrit.
skin: allergic ski n rxn: signs/symps can incl redness, swell, blistering &
itch. Mild skin irrit(after prlng/rptd cont): signs/symps can incl redness,
swell & itch. Inhal: vaps of heated matl may cause resp sys irrit. Dus t
from cutting, grinding, sanding/machining may cause irrit of resp sys.
ingest: may cause irrit of gi tiss: signs/symps can incl pain, vomit, abdom
tenderness, naus, blood in vomitus & blood in feces. chronic: none listed
by manufacturer.
neutralizing agent: none specified by manufacturer.
waste disposal methods: incinerate uncured waste in industrial or commercial
incinerator. Dispose of completely cured (or polymerized) matl in a sanitary
landfill. Since regs vary, consult applic federal, state & local regs or
authorities before disposal.
handling and storage precautions: avoid eye contact. Avoid skin contact. Avoid
inhalation of vapors created during cure cycle. Avoid inhal of dust created
by cutting, sanding/grinding.
other precautions: use water as lubricant on machining tools to elim dust &
improve machinability of cured parts. Store at temps which are <32f(0c).
allow matl to return to room temp before use. Keep out of reach of chi ldren.
Effects of overexposure: may cause skin and eye irritation. Spi class 2
First aid: wash skin immediately with soap & water. Flush eyes with
plenty of water.
Hcc: n1
boiling pt: b.P. Text: decomposes
spec gravity: 1.20
solubility in water: negligible
appearance and odor: off-white nylon supported w/slight odor.
Stability indicator/materials to avoid: yes
hazardous decomposition products: compounds of nitrogen, carbon.
Waste disposal methods: land burial.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy
Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and chronic: moderate eye and skin irritation. May
cause dermatitis.
First aid: eyes: flush immediately with water for 15 minutes.
inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Skin: wash with soap and warm water. Remove and launder
clothing if contamina ted.
Solubility in water: insoluble
appearance and odor: cream colored, tacky film slight odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids or bases.
stability condition to avoid: material will react slowly, if not stored
at recommended temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen.
conditions to avoid polymerization: store at 40f or below. Material will
slowly polymerize at higher temperatures.
Waste disposal methods: landfill or incinerate in accordance with
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a diglycidyl ether resin
cas: 25068-38-6
rtecs #: kd4380000
fraction by wt: 10-20%
other rec limits: none specified
ingred name: bisphenol a diglycidyl ether-resin
cas: 25036-25-3
fraction by wt: 13-30%
other rec limits: none specified
ingred name: carboxy terminated butyl nitrile (acrylonitrile butadiene
resin)
cas: 68891-50-9
fraction by wt: 3-6%
other rec limits: none specified
osha pel: none
acgih tlv: none
ingred name: acrylonitrile (sara iii)
cas: 107-13-1
rtecs #: at5250000
fraction by wt: 1-3%
other rec limits: none specified
osha pel: see 1910.1045
acgih tlv: s, 2 ppm;a2 9394
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: resorcinol diglycidyl ether
cas: 101-90-6
rtecs #: vh1050000
fraction by wt: 0.5-1%
other rec limits: none specified
ingred name: polyamide resin
cas: 68989-76-4
fraction by wt: 0.5-2%
other rec limits: none specified
ingred name: modified tertiary amine
cas: 51365-20-9
rtecs #: nm1275000
fraction by wt:
other rec limits: none specified
osha pel: none
acgih tlv: none
ingred name: diuron (sara iii)
cas: 330-54-1
rtecs #: ys8925000
fraction by wt: 0.1-1%
other rec limits: none specified
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3; 9192
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: cyanoguanadine
cas: 461-58-5
rtecs #: me9950000
fraction by wt: 2-4%
other rec limits: none specified
acgih tlv: 10 mg/m3 (dust)
ingred name: polyester fabric (mat)
fraction by wt: 40-65%
other rec limits: none specified
acgih tlv: 10 mg/m3 (dust)
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin, eye or respiratory irritation.
skin sensitization. No anticipated chronic effects.
effects of overexposure: contact with eyes may cause moderate
irritation. Contact with skin may cause allergic reaction.
inhalation of vapor may cause respiratory irritation.
medical cond aggravated by exposure: none known.
First aid: in eye: flush with water for 15 minutes and call physician.
on skin: wash area with soap and water. Inhalation: move to fresh
air and contact a physician.
Hcc: n1
spec gravity: 1.2 (water=1)
solubility in water: insoluble
appearance and odor: cream colored tacky film. Slight odor.
percent volatiles by volume: .3 max
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen.
Waste disposal methods: incinerate or dispose of in approved landfill.
to the best of our knowledge this product does not meet the
definition of hazardous waste under the us epa hazardous waste
regulations 40 cfr 261.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kd4380000
fraction by wt: 10-20% *
other rec limits: none specified
ingred name: epoxy resin
cas: 25036-25-3
fraction by wt: 13-30% *
other rec limits: none specified
ingred name: acrylonitrile butadiene resin
cas: 68891-50-9
fraction by wt: 3-6% *
other rec limits: none specified
acgih tlv: none
ingred name: acrylonitrile rubber (sara iii)
cas: 107-13-1
rtecs #: at5250000
fraction by wt: 1-3% *
other rec limits: none specified
osha pel: see 1910.1045
acgih tlv: s, 2 ppm;a2 9394
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: resorcinol diglycidyl ether
cas: 101-90-6
rtecs #: vh1050000
fraction by wt: 0.5-1% *
other rec limits: none specified
ingred name: polyamid resin
cas: 68989-76-4
fraction by wt: 0.5-1% *
other rec limits: none specified
ingred name: modified tertiary amine
cas: 51365-20-9
rtecs #: nm1275000
fraction by wt:
other rec limits: none specified
acgih tlv: none
ingred name: chlorophenyl urea (sara iii)
cas: 330-54-1
rtecs #: ys8925000
fraction by wt: 0.1-1% *
other rec limits: none specified
acgih tlv: 10 mg/m3
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: cyanoguanadine
cas: 461-58-5
rtecs #: me9950000
fraction by wt: 2-4% *
other rec limits: none specified
acgih tlv: 10 mg/m3
ingred name: * ranges only given. Exact composition is proprietary
information.
rtecs #: 9999999zz
other rec limits: none specified