NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES19T1313 | 2018-11-26 | PEPCE | 48 CA |
| SPE8ES18T9686 | 2018-09-17 | PEPCE | 60 CA |
| SPE8ES18Q0631 | 2018-07-24 | DSS01 | 97 CA |
| SPE8ES18T5695 | 2018-05-09 | PEPCE | 47 CA |
| SPE8ES18T3798 | 2018-03-12 | PEPCE | 50 CA |
| SPE8ES18T2442 | 2018-01-22 | PEPCE | 45 CA |
| SPE8ES18T0618 | 2017-10-30 | PEPCE | 203 CA |
| SPE8ES16T5636 | 2016-06-13 | PEPCE | 201 CA |
| SPE8ES16T0860 | 2015-11-09 | PEPCE | 583 CA |
The last inventory check on this NSN was done on 10/21/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ENACGQ - Household consumer products
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $86.06 to $143.44.. | |
| Does NSN 8040-00-152-0028 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, General Services Administration, Austria, Poland, Bulgaria, Brazil, Spain, Singapore, Australia, Belgium, Canada, New Zealand, France, Germany, Republic Of Korea, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 8040-00-152-0028? | |
| 001520028 or 00-152-0028 | |
| Does NSN 8040-00-152-0028 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-00-152-0028? | |
| Solicitation SPE8ES19T1313 for qty 48 on 11/21/2018 | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 10, 1971 | |
Effects of overexposure: may cause eye irritation skin sensitization or
other allergic responses.
First aid: wash skin immediately with soap and water. Flush eyes
immediately with plenty of water.
Hcc: t7
boiling pt: b.P. Text: decomposes
spec gravity: 1.55
solubility in water: negligible
appearance and odor: viscous grey paste with slight odor
Stability indicator/materials to avoid: no
stability condition to avoid: see storage recommendations
hazardous decomposition products: compounds of carbon and nitrogen
conditions to avoid polymerization: avoid heating large masses too high
in temp.
Waste disposal methods: land burial
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resins
fraction by wt: 58.0%
ingred name: asbestos (amianthus, obsolete amosite), (for osha pel, see
29cfr 1910.1101)
cas: 1332-21-4
rtecs #: ci6475000
fraction by wt: 14.0%
osha pel: 0.2 fibers/cc
acgih tlv: 0.5 fibers/cc; a1;89
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: fillers,unspecified
fraction by wt: 28.0%
Effects of overexposure: eye,skin & gastrointestinal irritation.
possible skin sensitization in some indivduals.
First aid: eye: flush 10 min w/copious water. Skn: wash w/soap & water.
launder contam clothing before reuse. Inges, inhl: no action
indicated.
Hcc: n1
spec gravity: 1.2
solubility in water: nil
appearance and odor: viscous cream colored liquid w/ low odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co*2, smoke when subjected to
excessive heat or flame.
Waste disposal methods: manufacturer recommend commercial incineration
with destruction & removal efficiency at 100%. Otherwise, dispose
in landfill or municipal refuse incinerator. Disposal methods must
be iaw federal, stat e & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epichlorohydrin/bisphenol a epoxy resin (ansi class ii)
fraction by wt: 73%
ingred name: amorphous fused silica (when combined with curative- 27% of
product)
rtecs #: vv7320000
acgih tlv: 20 mppcf
ingred name: curative
Effects of overexposure: eye,throat,skin,lung irritant
First aid: wash skin thoroughly flush eyes with water,remove to fresh
air,remove contaminated clothing,give artificial respiration if
needed,call doctor
Hcc: n1
appearance and odor: tan liquid,sharp odor
percent volatiles by volume: 0.2
Stability indicator/materials to avoid: yes
hazardous decomposition products: carbon
dioxide/monoxide,phenolics,cresols,aldehydes
conditions to avoid polymerization: excessive part b
Waste disposal methods: burn in adequate incinerator or bury in landfill
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and chronic: skin: possible sensitizer, minor
irritant. Eyes: minor transient irritant. Ingestion: not a likely
problem. Inhalation: not considered a problem unless related to
elevated temperature.
First aid: skin: wash contaminated areas with soap and water. Remove
contaminated clothing and wash before reuse. Eyes: flush with
running water for 15 min and see a physician. If ill effects occur
from breathin g, remove patient to fresh air and keephim warm and
quiet. If breathing stops apply artificial respiration. Call a
physician immediately.
Appearance and odor: tan, sharp
percent volatiles by volume: 0.2max
Stability indicator/materials to avoid: yes
hazardous decomposition products: on burning: co, co2, aldehydes,
phenolics, cresoles are possible.
Waste disposal methods: burn in adequate incinerator or bury in landfill
per local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non-hazardous ingredients
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and chronic: eyes: may cause burn. Skin: moderate
irritant.
First aid: eyes: flush with running water for at least 15 min and get
immediate medical help. Skin: wash with soap and water. Remove and
wash contaminated clothing before reuse, should ill effects occur
from bre athing fumes remove patient to fresh air, keep him warm
and quiet and call a physician. If breathing stops, give artificial
respiration. If swallowed, induce vomiting and call a doctor.
Evaporation rate & reference: slower than ether
appearance and odor: tan, sharp
percent volatiles by volume: 0.5max
Stability indicator/materials to avoid: yes
hazardous decomposition products: on combustion: ammonia, nitrous
oxides, carbon dioxide and carbon monoxide.
Waste disposal methods: dispose of with solid waste as permitted by
local laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non-hazardous ingredients
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate contact may irritate the
skin or cause a rash. Respeated or prolonged skin contact may
result in allergic sensitization.
explanation of carcinogenicity: neither this material nor any of its
components is considered a carcinogen.
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
First aid: eyes-flush eyes with water for 15 minutes. If irritation
persists, get medical attention. Skin-wash skin thoroughly with
soap & water. If irritation persists, get medical attention.
inhalation-remove victim to fresh air. If symptoms persists, get
medical attention. Ingestion-drink plenty of water. Get medical
attention immediately.
Hcc: v7
decomp temp: decomp text: not tested
vapor pres: nil
vapor density: >1
spec gravity: 1.59
viscosity: 5000-9000 p
solubility in water: negligible
appearance and odor: viscous gray paste with slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: do not heat mixed resin above 125 deg. F
unless curing surfaces to be bonded.
hazardous decomposition products: carbon monoxide, oxides of nitrogen,
aldehydes, acids and undetermined organics.
conditions to avoid polymerization: avoid mixing resin and curing agents
in batches greater than 1 pound unless you plan to use immediately.
Waste disposal methods: this material, as a waste, is not considered a
rcra hazardous waste. However, incineration in an epa-approved
waste incinerator is a preferred disposal practice.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy polymer
fraction by wt: 40-70%
other rec limits: none recommended
ingred name: 4-glycidyloxy-n,n-diglycidylaniline
cas: 5026-74-4
fraction by wt: 15-40%
other rec limits: none recommended
ingred name: aluminum (sara iii)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 10-30%
other rec limits: none recommended
osha pel: 15mg/m3 dust/5 fume
acgih tlv: 10mg/m3 dust; 9394
ingred name: silica, amorphous, precipitated and gel
cas: 112926-00-8
rtecs #: vv8850000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 20 mppcf; z-3
acgih tlv: 10 mg/m3 tdust; 9394
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: some people may develop allergic
reaction.
effects of overexposure: minor transient irritation of eyes & skin.
medical cond aggravated by exposure: skin rashes.
First aid: eye: flush w/water 15 minutes holding lids open. See dr.
skin: wash w/soap & water. See dr if rash develops. Inhalation:
remove to fresh air. Give artificial respiration if not breathing.
consult dr.
Boiling pt: b.P. Text: 400f,204c
decomp temp: decomp text: 400f,204c
spec gravity: 1.422
evaporation rate & reference: na
solubility in water: nil
appearance and odor: thick brown liquid, amine odor
percent volatiles by volume: 0.0
corrosion rate: na
Stability indicator/materials to avoid: yes
epoxy type materials in uncontrolled conditions.
hazardous decomposition products: carbon dioxide, carbon monoxide,
ammonia, other toxic fumes.
Waste disposal methods: may be hazardous if discarded. Discard according
to local, state, federal regs. Incineration is the preferred
method.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyamide
cas: 68410-23-1
fraction by wt: 50.0%
other rec limits: none recommended
ingred name: calcium carbonate
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 50.0%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3