Adhesive

Hazards

Effects of overexposure: eye contact may cause transient irrit.

First Aid

First aid: flush eyes with water for 15 min.If irrit.Persists have
worker examined by a md.

Chemical Properties

Hcc: n1
spec gravity: 1.05
solubility in water: negligible
appearance and odor: white paste,mild alcohol odor

Reactivity

Stability indicator/materials to avoid: yes
none
hazardous decomposition products: at temp.>400f, co*2 and sio*2 are
produced.

Proper Disposal

Waste disposal methods: this material when discarded is not a hazardous
waste per fed.Regulations 40cfr part 261. Disposal should be iaw
applicable state and local ordances for the disposal of industrial
waste.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: no ingredient for this formulation_ingredient

Hazards

Effects of overexposure: eye irritation, prolonged or repeated contact
may irritate skin.

First Aid

First aid: flush w/water.

Chemical Properties

Hcc: n1
boiling pt: b.P. Text: >300f >149
vapor pres:
spec gravity: 102
solubility in water: negligible
appearance and odor: medicinal/paste like.

Reactivity

Stability indicator/materials to avoid: yes
non known
stability condition to avoid: moisture causes polymerization forming
methyl ethyl ketoxime
hazardous decomposition products: decomposed whn expos to heat. Sio*2,
co*2, co

Proper Disposal

Waste disposal methods: can be land filled or burned in accordance
w/local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: methyl ethyl ketoximo
rtecs #: pm7788300
fraction by wt: 5%
acgih tlv: unk

ingred name: silicon tetrahydride
cas: 7803-62-5
rtecs #: vv1400000
fraction by wt: unk
osha pel: 5 ppm
acgih tlv: 5 ppm; 9192

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingestion: may be harmful if
swallowed. Skin: may occur in sensitive individualsinhalation:
causes mild respiratory irritation. applies only in uncured state.

eye contact: uncured prod contact irrita tes. Medical condititions
aggravated: nkother: none known. Chronic effects of overexposure:
none known
explanation of carcinogenicity: this product or one of its ingredients
present 0.1% or more not listed.

medical cond aggravated by exposure: skin irritation may occur in
certain sensitive individuals.

First Aid

First aid: ingestion: do not induce vomiting. Give water or milk. Get
med atten. Skin: dry with cloth or paper towel. Wash with soap and
water. Inhalation: get fresh air. Eyes: flush with water 15 min.

get med a tten.

Chemical Properties

Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
vapor pres: neg
vapor density: neg
spec gravity: 1.085
ph: na
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: physical state: solid, odor: mild, odor threshold:
nk, color: white
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
carbon monoxide, carbon dioxide, silicon dioxide, methanol
stability condition to avoid: carbon monoxide, carbon dioxide, silicon
dioxide, methanol
hazardous decomposition products: none known

Proper Disposal

Waste disposal methods: disposal should be made in accordance w/fed,
stateand local regulations. Bury in a licensed landfillor burn in
an approved incinerator according to federal, state and local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: methyltrimethoxysilane
cas: 1185-55-3
fraction by wt: 1-5%
osha pel: 200 (r)ppm
acgih tlv: 200 (r)ppm

Hazards

Health hazards acute and chronic: may cause irritation. Avoid contact
with skin, eyes, clothing, direct contact with uncured product or
its vapors may cause slight irritation. Inhalation of vapors may
produce respiratory irritation. I ngestion of the material may
produce abdominal pain and diarrhea.

First Aid

First aid: ingest: dont induce vomit. If vomit occurs, give fluid. Dr
determine if permissible to evacuate stomach/induce vomiting. Dont
give fluid to unconscious person. Skin: flush w/water 15 min.

remove conta minated clothes/shoes. Seek med aid if irritate
occurs. Eye: immed flush w/water 15 min hold lids apart. Dont
neutrilize chemical. Continue treatment until get med aid. Inhale:
move from area. Seek *

Chemical Properties

Vapor pres: negligible
vapor density: >1 (air=1)
spec gravity: 1.05
evaporation rate & reference: less than 1 (bu ac=1)
solubility in water: negligible
appearance and odor: milky-white or clear paste with slight odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction, reacts with acids, and water,
liberating acetone.

stability condition to avoid: exposure to oxidizing material until ready
for use.

hazardous decomposition products: silicone dioxide, carbon dioxide,
carbon monoxide, acetone.

Proper Disposal

Waste disposal methods: material that cannot be used should be disposed
of in an epa authorized facility. Dispose of empty containers
according to any applicable regulations under the resource
conservation and recovery act.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: no ingredient for this formulation_ingredient

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: warning! May cause irritation. Avoid
contact with skin,eyes & clothing. Contact with uncured product or
its vapors may cause irritation, dermatitis. Inhalation of the
vapors may produce respiratory ir
ritation,dizziness,headache,nausea,mental confusion. Ingestion may
be harmful & produce abdominal pain & diarrhea.

explanation of carcinogenicity: mfr listed no information about the
carcinogenicity of this material. Hmis does not expect it to be
carcinogenic.

effects of overexposure: eye/skin contact with uncured product or its
vapors may cause irritation, dermatitis. Inhalation of the vapors
may produce respiratory irritation,dizziness,headache,nausea,mental
confusion. Ingestion may be harmful & produce abdominal pain&
diarrhea.

medical cond aggravated by exposure: no information given by mfr on
msds.

First Aid

First aid: if irritation persists or is severe, see a doctor. eye: flush
w/water 15 min, hold lids open. Skin: wash with soap & water. Remove
contaminated clothing and launder before reuse. Inhaled: remove to
fres h air. Aid/restore breathing if necessary. Ingested: do not
induce vomiting. Give 2 large glasses of milk or water to dilute &
get immediate medical care. Nothing by mouth if unconscious.

Chemical Properties

Hcc: f2
nrc/state lic num: none
boiling pt: b.P. Text: 156f,69c
vapor pres:
vapor density: 3.0
spec gravity: 0.82
evaporation rate & reference: (butyl ac = 1) > 1
solubility in water: not soluble
appearance and odor: colorless, transparent liquid with solvent odor.

Reactivity

Stability indicator/materials to avoid: no
water, acids and alkalis.

stability condition to avoid: active ingredients react with water, acids
and alkalis, but do not present a hazard.

hazardous decomposition products: methanol (flammable/poisonous liquid)
and 2-propanol (flammable/liquid)
conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: material that cannot be used should be disposed
of in an epa authorized facility. Dispose of empty containers
according to any applicable regulations under the resource
conservation and recovery act.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: no ingredient for this formulation_ingredient

Hazards

Ld50 lc50 mixture: twa for crystalline silica is 10mg/m3
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eyes: may cause irritation.Skin: may
cause irritation.Ingest: may cause gi tract irritation.Inhal: may
cause respiratory irritation and cns depression.

explanation of carcinogenicity: crystalline silica is potential
carcinogen.

effects of overexposure: inhal: narcotic effect.

medical cond aggravated by exposure: persons with pre-existing
respiratory ailments may be at increased risk from exposure to the
dust from this product.

First Aid

First aid: skin: remove contaminated clothing;wash with soap and
water.Eyes: flush with water for 15 minutes.Inhal: remove to fresh
air.Give oxygen or artificial respiration if needed.Ingest: get
prompt qualified me dical attention.If conscious,induce vomiting.

Chemical Properties

Hcc: n1
vapor pres:
vapor density: >1
spec gravity: 1.3
ph: 7
evaporation rate & reference: >1 (n-butyl acetate=1)
solubility in water: slight
appearance and odor: paste;slight medicinal odor.Color not reported.

Reactivity

Stability indicator/materials to avoid: yes
moisture
stability condition to avoid: high heat,sources of ignition.

hazardous decomposition products: methylethylketoxime.

Proper Disposal

Waste disposal methods: dispose of in accordance with federal,state and
local regulations.Mfr states that the cured product can be disposed
of a synthetic rubber scrap.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: dihydroxypolydimethylsiloxane
cas: 70131-67-8
other rec limits: none recommended

ingred name: silica, crystalline - quartz
cas: 14808-60-7
rtecs #: vv7330000
other rec limits: none recommended
osha pel: see table z-3
acgih tlv: 0.1 mg/m3 rdust;9394

ingred name: dimethyl siloxane (dow corning 200)
cas: 63148-62-9
rtecs #: jt6484500
other rec limits: none recommended

ingred name: silica, amorphous, precipitated and gel
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3; 9293

ingred name: methyl oximino silane
cas: 22984-54-9
other rec limits: none recommended

ingred name: methylethylketoxime
cas: 29129-02-0
fraction by wt: 4%
other rec limits: none recommended

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct contact irritates slightly
with redness & swelling. Skin: a single relatively short exposure
causes no known adverse effect. Several repeated prolonged
exposures (24-48 hours) may irritate. inhal: vapor overexposure may
cause drowsiness. Vapors may injure lungs. Degree of injury will
depend (efts of overexp)
explanation of carcinogenicity: mfr listed no information about the
carcinogenicity of this material. Hmis does not expect it to be
carcinogenic.

effects of overexposure: hlth haz: on the concentration or duration of
exposure. Oral: small amounts transferred to the mouth by fingers
during use, etc., should not injure. Swallowing large amounts may
injure slightly.

medical cond aggravated by exposure: overexposure to any chemical may
result in enhancement to of pre-existing adverse medical conditions
and allergic reacations.

First Aid

First aid: eye: immediately flush with water for at least 15 minutes.

skin: wipe off and flush with water. Inhaled: remove to fresh air.

get medical attention if ill effects persist. Ingested: get
immediate medical attention.

Chemical Properties

Hcc: v7
nrc/state lic num: none
spec gravity: 1.04
solubility in water: less than 0.1
appearance and odor: sweet odor, paste-like, white

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction. Reacts with water, acids, etc.

liberating methyl & isopropyl alcohols.

stability condition to avoid: exposure to materials to avoid until ready
to use.

hazardous decomposition products: titanium dioxide, silicon dioxide, co2
& traces of incompletely burned carbon products.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollutio be reviewed to
determine approved disposal procedures. Contact dow corning if
there are any disposal q uestions.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: silica gel
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt: 9%
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3

ingred name: methyltrimethoxysilane
cas: 1185-55-3
rtecs #: vv4650000
fraction by wt: 5%
other rec limits: d/c 50 ppm

ingred name: titanium tetraisopropylate
cas: 546-68-9
rtecs #: nt8060000
fraction by wt: 2%

ingred name: methyl alcohol (methanol) (sara iii) formed on exposure
to water or humid air.

cas: 67-56-1
rtecs #: pc1400000
other rec limits: none recommended
osha pel: s, 200 ppm
acgih tlv: s,200ppm/250stel; 94
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: isopropyl alcohol (sara iii) formed on exposure to water
or humid air.

cas: 67-63-0
rtecs #: nt8050000
other rec limits: none recommended
osha pel: 400 ppm
acgih tlv: 400 ppm/500stel;9394

Hazards

Chemical Properties

hcc: n1
decomp text: unknown
vapor pres: negligible
vapor density: >1
spec gravity: 1.05
viscosity: paste
solubility in water: negligible
appearance and odor: milky-white to clear paste; slight odor.

corrosion rate: unknown

HAZCOM Label

product id: norsil rtv 138
cage: 2l329
company name: carlson r h co- northern labs div
street: 41 chestnut st
city: greenwich ct
zipcode: 06830-5921
health emergency phone: 203-531-5500(73)fax -0032 (jackie)
label required ind: y
date of label review: 12/20/1995
status code: c
label date: 12/20/1995
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: yes
health hazard: slight
contact hazard: slight
fire hazard: none

Transportation

=======================================================
responsible party cage: 2l329
trans id no: 93934
product id: norsil rtv 138
msds prepared date: 02/13/1992
review date: 12/20/1995
mfn: 1
net unit weight: 10.3
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: s
additional data: this is part a of 2 part kit. Other part is a 1 oz plastic or
glass bottle of primer.

Reactivity

Hazard and precautions: contact may cause skin and eye irritation. Inhalation
of vapors/mist may cause respiratory irritation. Ingestion may cause gi tract
irritation. Target organs: skin, eyes, respiratory tract. First aid:
eyes-immediately flush with water for 15 minutes, hold lids open. Get medical
attention. Skin-remove contaminated clothes. Wash with mild soap & water.

inhaled-remove to fresh air. Administer oxygen or artificial respiration as
needed. Get medical attention. Ingested-do not induce vomiting! Nothing by
mouth if unconscious. Get immediate medical attention.

Proper Disposal

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of eyes/mucous
membranes, headache. Chronic: no long-term affects.

explanation of carcinogenicity: explanation: no.

effects of overexposure: irritation of eyes, skin and upper respiratory
tract.

medical cond aggravated by exposure: eye, skin and respiratory disorders
may be aggravated by exposure to this product.

First Aid

First aid: eyes-flush with water for 15 minutes. Skin- wash with soap
and water. Inhalation-remove to fresh air. Give oxygen if breathing
difficult. Ingestion-wash out mouth with water. Call a physician.

Chemical Properties

Boiling pt: b.P. Text: 270f,132c
melt/freeze pt: m.P/f.P text: -130f,-90c
decomp temp: decomp text: nif
vapor pres: 3.7 mm
vapor density: 1.59
spec gravity: 0.80
ph: 7
evaporation rate & reference: >1 (n-butyl acetate=1)
solubility in water: 98%
appearance and odor: colorless liquid. Plesant, sweet odor.

percent volatiles by volume: 96
corrosion rate: nif

Reactivity

Stability indicator/materials to avoid: yes
acid chlorides and oxidizing agents.

stability condition to avoid: open flames, sparks and extreme heat.

hazardous decomposition products: ethyl alcohol from moisture contact.

co & volatile organics & silica aerosols from thermal degradation.

Proper Disposal

Waste disposal methods: incinerate in accordance with local, state and
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: ethyl silicate
cas: 78-10-4
rtecs #: vv9450000
fraction by wt: 3-5%
other rec limits: none recommended
osha pel: not est.

acgih tlv: not est.


ingred name: voc: 0.4 lb/gl; 40 g/l
rtecs #: 9999999vo
other rec limits: none specified

ingred name: dihydroxypolydimethylsiloxane (nonhaz)
cas: 70131-67-8
other rec limits: none recommended

ingred name: polydimethyl siloxane (nonhaz)
cas: 9016-00-6
rtecs #: tq2690000
other rec limits: none recommended

ingred name: amorphous silica, fumed (nonhaz)
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: none recommended
osha pel: 80 mg/m3
acgih tlv: not est

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation and anesthesia.

chronic: none.

explanation of carcinogenicity: explanation: no.

effects of overexposure: irritation of eyes, skin and upper respiratory
tract.

medical cond aggravated by exposure: eye, skin and respiratory disorders
may be aggravated by exposure to this product.

First Aid

First aid: eyes-flush with water for 15 minutes. Skin- wash with soap
and water. Inhalation-remove to fresh air. Give oxygen if breathing
difficult. Ingestion-wash out mouth with water. Call a physician.

Chemical Properties

Boiling pt: b.P. Text: 270f,132c
melt/freeze pt: m.P/f.P text: -130f,-90c
decomp temp: decomp text: nif
vapor pres: 3.7 mm
vapor density: 3.5
spec gravity: 0.80
ph: 7
evaporation rate & reference: >1 (n-butyl acetate=1)
solubility in water: 98%
appearance and odor: colorless liquid. Plesant, sweet odor.

percent volatiles by volume: 96
corrosion rate: nif

Reactivity

Stability indicator/materials to avoid: yes
acid chlorides and oxidizing agents.

stability condition to avoid: open flames, sparks and extreme heat.

hazardous decomposition products: carbon monoxide, carbon dioxide,
silica and titania from combustion.

Proper Disposal

Waste disposal methods: incinerate in accordance with local, state and
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: methyl isobutyl carbinol
cas: 108-11-2
rtecs #: sa7350000
fraction by wt: 93%
other rec limits: none recommended
osha pel: s,25 ppm
acgih tlv: s,25 ppm/40stel;9394

ingred name: ethyl silicate
cas: 68412-37-3
fraction by wt: 5%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 10 ppm; 9394

ingred name: poly(butyltitanate)
cas: 9022-96-2
fraction by wt: 1%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: s: 50 ppm ceiling

ingred name: voc = 6.5 lbs/gl 780 g/l
rtecs #: 9999999vo
fraction by wt: na
other rec limits: none recommended
osha pel: na
acgih tlv: na

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingest: harmful. Skin: irritation.

inhal: irritation. Eye: irritation. Chronic: skin/respiratory
sensitization. Acute toxicant/potential cancer hazard.

First Aid

First aid: ingest: don't induce vomiting. Dilute w/1-2 glasses
water/milk. Get med aid. Never give anything by mouth to
unconscious person. Skin: remove w/dry cloth. Wash
w/detergent/water. Inhal: get fresh air. eye: immed flush w/lots
water >15 min.Get immed med aid.

Chemical Properties

Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
vapor density: negligible
spec gravity: 1.085
ph: na
evaporation rate & reference: >1.0 (buac=1)
solubility in water: insoluble
appearance and odor: white solid, sweet odor
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
nk
hazardous decomposition products: co, co2, silicon dioxide, methanol,
formaldehyde.

Proper Disposal

Waste disposal methods: according to federal/state/local regulations.

bury in licensed landfill or burn in approved incinerator.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: methyl trimethoxysilane (ld50 12500 mg/kg rat, ld50
>10000mg/kg rabbit)
cas: 1185-55-3
fraction by wt: 1-5%
other rec limits: 200 ppm

ingred name: 1-3,5-tris(trimethoxysilylpropyl)-isocyanurate)
cas: 26115-70-8
fraction by wt: 1-5%
other rec limits: none recommended

ingred name: polydimethyl siloxane (ld50 >40000mg/kg oral rat,
lc50>535mg/l inhal rat) (non haz)
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt: 5-10%
other rec limits: none recommended

ingred name: d4&hmdz treated silicon dioxide (ld50 3160mg/kg rt)
(non-haz)
cas: 68937-51-9
fraction by wt: 10-30%
other rec limits: none recommended
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3

ingred name: polydimethylsiloxane ailanol/st (ld50 >40000mg/kg oral rat,
lc50>535mg/l 4 hr inhal rat)
cas: 70131-67-8
fraction by wt: 60-80%
other rec limits: none recommended

ingred name: voc =
rtecs #: 9999999vo
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingest: harmful
(vomiting/nausea/diarrhea/irrit) skin: drying/absorption. Inhal:
headache/dizziness/nausea/incoordination/irrit. Eye: irrit/tissue
damage. Chronic: skin/resp sensitization. Acute toxic ant/potential
cancer hazard. Targets dermatitis/resp ailments/cns
damage/liver/kidney/corneas/pulminary edema.

medical cond aggravated by exposure: respiratory, liver, kidney.

First Aid

First aid: ingest: don't induce vomiting. Dilute w/102 glasses
water/milk. Get med aid. Never give anything by mouth to
unconscious person. Skin: remove contam clothes/wash before reuse.

wash w/soap & water. Get med aid. Inhal: get fresh air. If not
breathing give artif resp(mouth-to-mouth) . If trouble breathing
give oxygen. Get med aid. Eye: immed flush w/lots water >15 min.

get immed med aid.

Chemical Properties

Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
vapor pres: na
vapor density: na
spec gravity: 0.8
ph: na
evaporation rate & reference: >1 (buac=1)
solubility in water: reacts
appearance and odor: pink liquid, pungent odor
percent volatiles by volume: 80.0

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents
stability condition to avoid: heat, sparks, flame, other ignition
sources.

hazardous decomposition products: co, co2, silicon dioxide, oxides of
nitrogen.

Proper Disposal

Waste disposal methods: according to federal/state/local regulstions.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: benzene (sara 313)(vp=75@20c)(ld50=3800mg/kg rat,
lc50=10000ppm/7 hr rat)
cas: 71-43-2
rtecs #: cy1400000
fraction by wt:
other rec limits: none recommended
osha pel: 1 ppm/stel 5
acgih tlv: 10 ppm
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs

ingred name: ethyl silicate
cas: 78-10-4
rtecs #: vv9450000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 10 ppm

ingred name: acetone (sara 313)(vp=186@20c)
cas: 67-64-1
rtecs #: al3150000
fraction by wt: 10-30%
other rec limits: none recommended
osha pel: 750 ppm/stel 1000
acgih tlv: 750 ppm/stel 1000
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: isopropyl alcohol (sara 313)(vp=30@20c)(ld50=5840mg/kg oral
rat,ld50=13000mg/kg dermal rabbit,lc50 12000ppm/8hr inh rat)
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 10-30%
other rec limits: none recommended
osha pel: 400 ppm/stel 500
acgih tlv: 400 ppm/stel 500

ingred name: toluene (sara 313)(vp=22@20c)(oral ld50=5000mg/kg
rat,dermal ld50=14000mg/kg rabbit,inhal lc50=5320ppm.8hr mouse)
cas: 108-88-3
rtecs #: xs5250000
fraction by wt: 10-30%
other rec limits: none recommended
osha pel: 200 ppm/stel 150
acgih tlv: 50 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

ingred name: n-butyl alcohol (sara 313)(vp=4.4@23c)(oral ld50=790mg/kg
rat,dermal=4200mg/kg rabbit)(inhal lc50=8000ppm/4hr rat)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 50 ppm
acgih tlv: 50 ppm
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: silanol/stpd siloxane w/me siloxns (non-haz)(oral
ld50=>40000mg/kg rat)(lc50 inhal >535mg/l)
cas: 68554-67-6
fraction by wt: 30.0%
other rec limits: none recommended

ingred name: voc = 690 g/l
rtecs #: 9999999vo
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant