NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES20T3402 | 2020-03-18 | PEPCE | 2 KT |
| SPE8ES20T3351 | 2020-03-16 | PEPCE | 8 KT |
| SPE8ES20T3184 | 2020-03-10 | PEPCE | 1 KT |
| SPE8ES20T3160 | 2020-03-09 | PEPCE | 2 KT |
| SPE8ES20T3128 | 2020-03-09 | PEPCE | 2 KT |
| SPE8ES20T2978 | 2020-03-02 | PEPCE | 4 KT |
| SPE8ES20T2734 | 2020-02-24 | PEPCE | 1 KT |
| SPE8ES20T2679 | 2020-02-24 | PEPCE | 4 KT |
| SPE8ES20T2585 | 2020-02-18 | PEPCE | 2 KT |
| SPE8ES20T2552 | 2020-02-18 | PEPCE | 1 KT |
The last inventory check on this NSN was done on 06/13/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
W - Corrosive materials, un class 8 (corrosive label)
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $630.67 to $1,051.11.. | |
| Does NSN 8040-01-107-4000 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, General Services Administration, Spain, Singapore, Canada, United Kingdom, and Netherlands | |
| What is the NIIN of NSN 8040-01-107-4000? | |
| 011074000 or 01-107-4000 | |
| Does NSN 8040-01-107-4000 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-01-107-4000? | |
| Solicitation SPE8ES20T3402 for qty 2 on 03/13/2020 | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 05, 1981 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is corrosive to body tissues
causing burns on contact or very soon thereafter. vapors are
severely irritating and may sensitize allergic reactions
explanation of carcinogenicity: mfr claims that none of the compounds in
this product is listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: eye: severe irritation, burns.
skin: irritation, burns, may sensitize allergic reactions.
inhaled: respiratory irritation. Ingested: severe g/i irritation,
burns to the mucous membranes.
medical cond aggravated by exposure: any respiratory or skin condition,
especially in cases of sensitization
First aid: eye: flush w/water 15 min hold lids open. See doctor.
skin: remove contaminated clothing and launder before reuse. wash
with soap & water, alcohol, or hand cleaner.(do not use solvents.)
inhalation: pr oduct is not volatile and thus no problem at normal
temperature. Ingested: unlikely, but if occurs, do not induce
vomiting, get immediate medical care. If irritation persists,or is
severe,see a doctor.
Hcc: b2
vapor density: 8.45
spec gravity: 1.02
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: reddish orange liquid with an ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: carbon monoxide, carbon dioxide,
nitrogen oxides, aldehydes, acids and unidentified organic
compounds.
conditions to avoid polymerization: avoid mixing batches larger than 1
pound. do not heat mixed adhesive unless in thin sections as with
bonding surfaces.
Waste disposal methods: dispose i/a/w federal,state,local regulations.Do
not incinerate closed containers.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
fraction by wt: 100%?
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause irritation and possible
allergic reactions. May sensitize allergic reactions.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: possible skin irritation or sensitization, eye
irritation
medical cond aggravated by exposure: any respiratory or skin condition.
First aid: eye: flush w/ water 15 min hold lids open. See a doctor.
skin: remove contaminated clothing and launder before reuse. wash
with soap & water, alcohol, or hand cleaner. Inhalation: product is
not volati le and thus no problem at normal temperature.
ingested: unlikely, but if occurring, get immediate medical care.
if irritation persists,or is severe,see a doctor.
Hcc: v5
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: milky white paste, (no odor given)
Stability indicator/materials to avoid: yes
strong oxidizing agents, or strong acids
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: carbon monoxide,carbon dioxide,
nitrogen oxides,aldehydes, acids, other miscellaneous organic
compounds
conditions to avoid polymerization: avoid mixing in batches greater than
one pound. Do not heat above 75f unless curing surfaces to be
bonded.
Waste disposal methods: dispose i/a/w federal,state,local regulations.
do not incinerate closed containers.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: pigment (white per tir)
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may cause skin and eye irritation and
possible allergic reactions. Prolonged and repeated contact may
cause sensitization which will result in allergic reactions. May
cause skin irritation as allergic dermatitis. Avoid contact with
eyes orskin.
effects of overexposure: skin rash, irritation.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: milky-white paste
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: voc
rtecs #: 9999999vo
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: material may be corrosive or cause
severe burns to skin and eyes. High concentration of vapors can
cause severe irritation of eyes and respiratory tract. Liquid
causes severe damage to mucous membrane s if swallowed. Prolonged
and repeated contact may cause sensitization which will result in
allergic reactions.
effects of overexposure: possible burns to eyes and skin; irritation and
possible sensitization to skin. Vapors may be irritating to upper
respiratory tract. Do not get on skin or clothing.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water or hand cleaner. Do not use
solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see phy sician.
Vapor density: 8.45
spec gravity: 1.02
evaporation rate & reference: nil
appearance and odor: reddish-orange liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: alkylamines
ingred name: voc
rtecs #: 9999999vo
Ld50 lc50 mixture: ld50 (oral, rat) is unknown.
routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- oral: may be harmful. May cause burns &
ulceration to mouth, throat, stomach. Eye/skin: corrosive. May cause
chemical burns. Inhalation: vapors/m ists irritate nose & throat.
chronic- may result in skin burns & possible allergic
sensitization.
explanation of carcinogenicity: none
effects of overexposure: eyes, skin irritation, chest discomfort
medical cond aggravated by exposure: skin sensitization
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Provide cpr/oxygen if needed. Eyes: flush with water for 15
minutes, holding eyelids open. Get medical attention. Skin: wash
with soap & water. Oral: if conscious, drink plentyof water. Get
medical attention immediately.
Hcc: b2
nrc/state lic num: not relevant
vapor pres:
spec gravity: 1.02
viscosity: 0.02 - 0.05
solubility in water: 100%
appearance and odor: reddish-orange liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong mineral acids
stability condition to avoid: excessive heat
hazardous decomposition products: oxides of nitrogen, carbon monoxide,
carbon dioxide, acids and undetermined organics
conditions to avoid polymerization: avoid mixing part a and part b in
baches greater than 1 pound. Do not heat mixture above 125f.
Waste disposal methods: contact federal, state and local environmental
regulators for guidance regarding proper disposal. Incineration in
an epa-approved incinerator is a preferred disposal practice. This
material, as a wast e, is not considered a rcra hazardous waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: di(3-aminopropyl) ether diethylene glycol/diethylene glycol
diaminopropyl ether
cas: 4246-51-9
rtecs #: id6475000
fraction by wt: 60- 100%
other rec limits: none recommended
ingred name: volitile organic content as listed on msds:
rtecs #: 9999999vc
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate effects: this material is
corrosive to eyes and skin. Brief contact may cause chemical burns.
vapors and mists will irritate nose and throat. Long term effects:
repeated or prolonged skin co ntact may result in burns and
possible allergic sensitization.
effects of overexposure: skin or eye irritation, chest discomfort
*** excessive heat build-up causing an exotherm. Theexotherm
has the potential for release of toxic gasses.
medical cond aggravated by exposure: skin sensitization.
First aid: eye: flush eyes with lots of running water for 15 minutes.
get medical attention immediately. Skin: wash skin thoroughly with
soap and water. If irritation persists, get medical attention.
inhalation: remove victim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Vapor pres:
spec gravity: 1.02 (water=1)
viscosity: 0.02-0.05 *
solubility in water: 100%
appearance and odor: reddish-orange liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (prt a) & curing agent
(prt b) in batches >1 lb unless you plan to use immed. Do not heat
mixed **
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: ** adhesive above 125f unless curing
surfaces to be bonded. Failure to observe these precautions may
result in ***
Waste disposal methods: not rcra hazardous waste. Incineration in epa
approved waste incinerator is a preferred disposal practice. Chem
additions, processing, otherwise altering mat'l may make info
incomplete. Consult state & local regulations regarding proper
disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene-glycol diamino propyl ether
cas: 4246-51-9
rtecs #: id6475000
fraction by wt: 60-100%
other rec limits: none
osha pel: none
acgih tlv: none
ingred name: volatile organic content, g/l (test method):
(estimate)
rtecs #: 9999999vo
other rec limits: none recommended
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: this material may be corrosive to eyes & skin. Brief
contact may cause chemical burns. Vapors & mists will irritate nose &
throat. Repeated or prolonged skin contact may result in burns, possible alle
rgic sensitization.
explanation of carcinogenicity: neither this material nor any of it's
components is considered a carcinogen
signs and symptions of overexposure: skin or eye irritation. Chest discomfort.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.
b.P. Text: undefined
vapor pres: <0.4
spec gravity: 1.02
solubility in water: 100%
appearance and odor: reddish-orange liquid, ammoniacal odor
corrosion rate: na
product id: hysol ea 9313 at system, as9078016
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: this material may be corrosive to eyes & skin.
brief contact may cause chemical burns. Vapors & mists will irritate nose
& throat. Repeated or prolonged skin contact may result in burns,
possible alle rgic sensitization.
skin or eye irritation. Chest discomfort.
=======================================================
responsible party cage: 33564
trans id no: 107974
product id: hysol ea 9313 at system, as9078016
msds prepared date: 01/01/1995
review date: 07/17/1996
mfn: 7
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a&b in batches >1lb & heating
mixture >75f unless curing surfaces to be bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
conditions to avoid polymerization: no information provided by mfg.
spill release procedures: wear protective clothing, gloves & safety
glasses. Absorb spill w/sorbent material (vermiculite or sand) scrape up or
shovel into dot-pproved waste containers.
neutralizing agent: na
waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/otherwise
altering matl may make waste management infor herein incomplete/inaccurate/
inappropriate.Consult state/loc regulations.
handling and storage precautions: product may be stored at room temperature for
up to 12 months. Keep container tightly closed when not in use.
other precautions: follow curing schedule/mixing ratios as recommended in
product literature. Empty containers retain product residue so obey hazard
warnings and handle empty containers as if they were full. Don't cut, grind,
weld or drill on/near container.
Ld50 lc50 mixture: oral ld50(rat): 4290 mg/kg
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: irritation, chemical burns.
repeated/prolonged contact may result in burns & allergic
sensitization. May be corrosive. Eyes: irritation, burns.
inhalation: irritation to nose & throat.
explanation of carcinogenicity: none
effects of overexposure: irritation, chest discomfort, burns.
medical cond aggravated by exposure: skin sensitization.
First aid: eyes: flush w/water for 15 mins. Skin: wash thoroughly w/soap
& water. Inhalation: remove to fresh air. Ingestion: drink plenty
of water. Obtain medical attention in all cases.
Vapor pres:
spec gravity: 1.02
solubility in water: complete
appearance and odor: liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis/mineral acids.
hazardous decomposition products: co, nitrogen oxides, acids &
undetermined organics.
conditions to avoid polymerization: mixing resin & curing agent in
batches greater than 1 lb unless you plan to use immediately. (see
supp)
Waste disposal methods: incinerate in an epa approved incinerator.
chemical additions, processing/otherwise altering may make
management information incomplete, inaccurate/inappropriate.
dispose of iaw/federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: volatile organic content:
rtecs #: 9999999vo
ingred name: di(3-aminopropyl) ether *96-2*
cas: 4246-51-9
rtecs #: id6475000
fraction by wt: 60-100%