Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Petroleum Base Hydraulic Fluid

NSN: 9150-01-263-7243 | Model: 6381773

A fluid of petroleum origin characterized by high viscosity index, used as a power transmission medium in hydraulically-actuated systems and apparatus.

NSN Properties and Flags
NATO Stock Number
9150-01-263-7243
DEMIL
NO
Basic Ingredient
Mineral oil
Service Characteristics
Corrosion resistive and antiwear and oxidation resistant
Quantity Within Each Unit Package
55.000 gallons
Viscosity At Rated Temp
1000.00 -31 degrees fahrenheit and 500.00 -4 degrees fahrenheit and 25 104 degrees fahrenheit and 8.00 212 degrees fahrenheit
Maximum Pour Point
-40.0 degrees fahrenheit
Minimum Flash Point And Test Method
220.0 degrees fahrenheit cleveland open cup
Special Features
fire point and test method 235 degrees fahrenheit cleveland open cup; hues iaw astm d1500, macimum
Color
Any acceptable
Reference Number Differentiating Characteristics
As differentiated by source control drawing

Inventory Check

The last inventory check on this NSN was done on 05/15/2023. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-01-263-7243 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • 6381773
  • 6381773-2
  • 6381773-2
  • 6381773-2
Cage Codes:
  • Naval Sea Systems Command (CAGE 53711)
  • Chemtura Corporation (CAGE 07950)
  • Lubricating Specialties Company (CAGE 8Y842)
Schedule B & Trade:
  • Schedule B: 3819000000 (NAICS 324110)

    Hydraulic brake fluids & oth prepared liquids for hydraulic transmission, nt containing or containing le 70% by wgt of petroleum oils/oil bituminous

  • SITC: 59731

    Hydraulic brake fluids and prepared liquids for hydraulic transmissions, containing less than 70% by weight of petroleum or bituminous mineral oils

  • End Use: 12550

    Chemicals-other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

ADPE

- Represents items with no adp components

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    030040 - Brake shock absorber etc fluid

  • WCC:

    609 - Petroleum products or derivatives, with flashpoint higher than 80 degrees (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    Q - 70.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    1
  • Unit of Measure
    Dr
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    9b----s
  • Repariability

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $5,822.89 to $9,704.81..
Does NSN 9150-01-263-7243 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Navy, and Turkey
What is the NIIN of NSN 9150-01-263-7243?
012637243 or 01-263-7243
Does NSN 9150-01-263-7243 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-01-263-7243?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Sep 17, 1987
MSDS

Material Safety

MSDS BJPPW BRAYCO 717

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-ingestion: not expected to cause
ill effects. Inhalation of mist may cauae irritation. Minute
amounts aspirated into lungs may cause pulmonary injury. Eye:
irritation. Skin: not normally expected to cause ill effects.

chronic-prolonged/repeated skin contact may cause
irritation,dermatitis.

explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.

effects of overexposure: prolonged or repeated skin contact may cause
skin irritation. Eye contact may cause eye irritation.

medical cond aggravated by exposure: persons with a skin disorder should
avoid prolonged contact when handling or using this product.

First Aid

First aid: skin: remove contaminated clothing. Wash with soap and water.

get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.

eye : immediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >400f,>204c
spec gravity: 0.884
solubility in water: insoluble
appearance and odor: light amber fluid, petroleum odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extremely high temperatures
hazardous decomposition products: fumes,smoke,carbon monoxide, and other
decomposition products in the case of incomplete combustion.

Proper Disposal

Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: triphenyl phosphate
cas: 115-86-6
rtecs #: tc8400000
fraction by wt:
other rec limits: none specified
osha pel: 3 mg/m3
acgih tlv: 3 mg/m3; 9192

ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 70-100%
other rec limits: none specified
acgih tlv: 5 mg/m3 (oil mist)

MSDS BYXKV A0900 MIL-F-17111B POWER TRANSMISSION FLUID

Hazards

Ld50 lc50 mixture: tlv- 5 mg/m3 as oil mist
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: normally does not cause ill
effects except in very sensitive persons. Chronic: prolonged or
repeated exposure may cause skin irritation and inflammation.

explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.

effects of overexposure: skin-irritation.

medical cond aggravated by exposure: persons with preexisting skin
disorders should avoid contact with product.

First Aid

First aid: eyes-flush with water for 15 minutes. See doctor if
irritation develops. Skin-remove contaminated clothes. Wash with
mild soap & water. See doctor if irritation develops.

inhaled-remove to fresh air. administer oxygen or artificial
respiration as needed. Ingested-do not induce vomiting! Consult a
physician.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 392f,200c
vapor pres:
vapor density: >1
spec gravity: 0.860
evaporation rate & reference:
solubility in water: negligible
appearance and odor: yellow, oily liquid; petroleum odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: do not heat above flash point.

hazardous decomposition products: carbon monoxide and asphyxiants.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: dispose of in accordance with local, state and
federal environmental regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrotreated middle petroleum distillate
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt: 85%
other rec limits: none recommended

MSDS BZBSF MIL-L-7808J, METREX AF OIL 01

Hazards

Ld50 lc50 mixture: tlv: no acgih tlv.

routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation: unknown. Ingestion:
unknown. Eye: expected to be nonirritating, based on testing of
similiar products and/or components. Skin: expected to be
nonirritating, based on testing of similiar pr oducts and/or
components.

explanation of carcinogenicity: not carcinogenic.

effects of overexposure: none specified by manufacturer.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye-immediately flood eyes with plenty of cool water for at
least 15 min. Do not let victim rub eyes. Inhalation-immediately
remove victim to fresh air. If victim has stopped breathing give
artificial respiration, preferably by mouth-to-mouth. Get medical
attention immediately. Skin-wash contact areas with soap and water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 600f,316c
vapor pres:
viscosity: 72.4 sus
solubility in water: negligible
appearance and odor: astm 1.0 liquid.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: extreme heat.

hazardous decomposition products: carbon monoxide, phosphoric oxides,
nitrogen oxides.

Proper Disposal

Waste disposal methods: product is suitable for burning in an enclosed,
controlled burner for fuel value or disposal by supervised
incineration. Such burning may be limited pursuant to rcra. Use of
these methods is subject t o user compliance with applicable
laws/regulations

Ingredients List

Ingred name: tricresylphosphate
cas: 1330-78-5
rtecs #: td0175000
fraction by wt: 2%
other rec limits: none recommended

ingred name: synthetic oil
fraction by wt: >5%
other rec limits: none recommended

ingred name: other ingredients
fraction by wt:
other rec limits: none recommended

ingred name: proprietary ester
fraction by wt:
other rec limits: none recommended

MSDS BZBSG HATCOL 1278 (MIL-L-7808J)

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may be an eye or skin irritant. Low to
medium toxicity.

explanation of carcinogenicity: not carcinogenic.

effects of overexposure: none known.

medical cond aggravated by exposure: none known.

First Aid

First aid: eye contact-flush with water for 15 min. See physician. Skin
contact-wash with soap & water thoroughly. See physician if
necessary. Remove contaminated clothing. Ingestion-do not induce
vomiting, drin k plenty of water. Do not give anythingby mouth to
an unconscious victim. See physician immediately. Inhalation-remove
to fresh air. See physician if necessary.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >650f,>343c
vapor pres:
spec gravity: 0.95
solubility in water:
appearance and odor: clear oily liquid. Low odor.

Reactivity

Stability indicator/materials to avoid: yes
strong acids or strong bases, oxidizing agents.

stability condition to avoid: high temperatures. Avoid contact with fire
and sparks.

hazardous decomposition products: carbon dioxide, carbon monoxide.

Proper Disposal

Waste disposal methods: free liquids may not be landfilled. Recover and
or incinerate liquids where possible. Obey local, state and federal
regulations.

Ingredients List

Ingred name: mixed trimethylolpropane esters
cas: 68130-53-0
other rec limits: none recommended

ingred name: neopentyl glycol ester of pelargonic, caprylic and capric
acids
cas: 70693-32-2
other rec limits: 5 mg/m3 (mfg)

ingred name: tar acids, cresylic,phenyl,phosphate
cas: 68952-35-2
other rec limits: none recommended

ingred name: tricresylphosphate
cas: 1330-78-5
rtecs #: td0175000
other rec limits: none recommended

ingred name: mixed trimethylolpropane esters
cas: 67762-64-5
other rec limits: none recommended

ingred name: tsp-46728100000-0002
other rec limits: none recommended

MSDS CGXFH BRAYCO 717

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is not known.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory &
gastrointestinal tracts. Acute- eye: may cause irritation.

skin: prolonged/repeated contact may cause irritation & defatting.

inhale: vapors may cause respiratory i rritation, damage to lungs.

oral: can cause gastrointestinal irritation, vomiting. Aspiration
hazard. Chronic- none .

explanation of carcinogenicity: none.

effects of overexposure: irritation, redness, swelling, nausea,
vomiting, diarrhea, blurred vision, tearing, defatting of skin,
headache, abdominal pain
medical cond aggravated by exposure: persons with pre-existing skin
disorders, eye problems or impaired respiratory function may be
more susceptible to the effects of this product.

First Aid

First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes. Hold eyelids open.

skin: wipe off excess & wash skin with mild soap & water or
waterless cleaner . Oral: do not induce vomiting. Call physician
immediately. Do not leave victim unattended.

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: >400f,>204c
spec gravity: 0.8740 - 0.8940
solubility in water: nil
appearance and odor: light amber fluid - hydrocarbon odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat, open flame
hazardous decomposition products: carbon monoxide, carbon dioxide,
various hydrocarbons, smoke, fumes

Proper Disposal

Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Incineration is recommended.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred
name: phenol,2,6-bis(1,1-dimethylethyl)-4-methyl-/2,6-di-tert-butyl-
p-cresol
cas: 128-37-0
rtecs #: go7875000
fraction by wt: 1 - 5%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3; 9596

ingred name: hydrotreated middle petroleum distillate
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt: 65 - 70%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist

ingred name: distillates,petroleum,hydrotreated light naphthenic/mineral
oil
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 15 - 20%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)