Worldwide distributor of NSN parts and consumables located in the USA.
A light or medium bodied mineral oil, a synthetically prepared product, or a combination thereof, which is used in transformers, oil circuit breakers, and other electrical apparatus as an insulating or cooling medium or both.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Insulating or transformer oils, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $2,936.70 to $4,894.49.. | |
Does NSN 9160-00-965-2376 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Canada, France, Greece, and Turkey | |
What is the NIIN of NSN 9160-00-965-2376? | |
009652376 or 00-965-2376 | |
Does NSN 9160-00-965-2376 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9160-00-965-2376? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1960 |
Ld50 lc50 mixture: oral rat ld50=>10,000 mg/kg
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is practically non-toxic.
dermal contact is slightly irritating. 6 hr inhalation studies have
shown no effects due to the low volitility of the product and thus
low exposure levels. See supp d ata.
effects of overexposure: other than slight irritation, none were
reported.
medical cond aggravated by exposure: none reported.
First aid: mfr made no comment on first aid procedures. Following from
hmis: eyes: flush with water 15 min. Skin: remove contaminated
clothing. Launder before re-use. Wash product from skin with soap
and water flu sh. Inhaled: remove to fresh air. Ingested: get
immediate medical attention. If irritation from any contact is
severe or persists,get medical attention.
Hcc: n1
vapor pres: 0.009@149c
vapor density: 17
spec gravity: 0.889
viscosity: 6.1-6.7cst
solubility in water: very low
appearance and odor: clear oil liquid, mild, sweet odor
Stability indicator/materials to avoid: yes
exposure to highly oxidizing materials should be avoided. Water at high
temperatures will cause hydrolysis.
stability condition to avoid: recommended maximum use temperature under
inert conditions is 350f.
hazardous decomposition products: normal products o hydrocarbon
combustion plus silcon dioxide and partial silicate esters.
Waste disposal methods: dispose i/a/w federal,state,local regulations.
mfr suggests incineration. Do not flush to sewer or public water
way.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: organosilicate ester (product of reacting silicon tetra
chloride with anhydrous alcohol)
ingred name: 2,6-di-tert-butyl-p-cresol
cas: 128-37-0
rtecs #: go7875000
fraction by wt: 0.5%
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3; 9192
ingred name: 2-ethyl-1-butanol (present as a product of hydrolysis. See
case history 85098h)
cas: 97-95-0
rtecs #: el3850000
Ld50 lc50 mixture: dermal ld50 (rabbit) is >7.94 g/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes-slightly irritating to eyes &
could cause prolonged impairment of vision. Skin-moderate skin
irritant. Ingestion-considered practically non-toxic to internal
organs. Inhalation-considered practic ally non-toxic to internal
organs.
effects of overexposure: eyes-may include pain, teras, redness and
blurred vision. Skin-may include pain or a feeling of heat,
discoloration, swelling and blistering.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: flush eyes immediately with fresh water for 15 min. If
irritation persists, seea doctor. Skin: remove contaminated
clothing. Wash skin with soap & water. See a doctor if symptoms
occur. Ingestion : no first aid are required. Inhalation: sinse
this material is not expected to be an inhalation problem, no first
aid procedures are required.
Hcc: n1
boiling pt: b.P. Text: nda
melt/freeze pt: m.P/f.P text: nda
decomp temp: decomp text: nda
vapor pres: 0.009
vapor density: 17
spec gravity: 0.889-
ph: nda
viscosity: 6.1-6.7 cst
evaporation rate & reference: nda
solubility in water: very low solubility
appearance and odor: clear, liquid with a mild, sweet odor.
percent volatiles by volume: nda
Stability indicator/materials to avoid: yes
may react with strong oxidizing agents, such as chlorates, nitrates,
peroxides, etc.
stability condition to avoid: avoid contact with water at high
temperature.
hazardous decomposition products: products of decomposition may include
silicon dioxide.
conditions to avoid polymerization: polymerization will not occur.
Waste disposal methods: place contaminated material in disposable
container & dispose of in a manner consistant with applicable
regulations. Contact local environmental or health authoroties for
approved disposal of this mat erial.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: organosilicate ester
fraction by wt: >99.0%
other rec limits: none determined
ingred name: additives
fraction by wt:
other rec limits: none determined
Ld50 lc50 mixture: oral ld50 rat >5 g/kg of body weight
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated skin contact may
cause skin irritation. Prolonged or repeated skin contact with this
product tends to remove skin oils, possibly leading to irritation &
dermatitis. Product conta cting the eyes may cause eye irritation.
product has a low order of acute oral & dermal toxicity, but minute
amounts aspirated into the lungs during ingestion or vomiting may
cause mild to severe pulm onary injury & possibly death.
explanation of carcinogenicity: in accordance with the current osha
hazard communication standard criteria, this product does not
require a cancer hazard warning. This product contains
synthetically derived materials, & as such is not characterized by
current iarc classification criteria for oils.I
effects of overexposure: eyes: irritation. Skin: irritation, defatting,
dermatitis.
medical cond aggravated by exposure: none recognized.
First aid: eye contact: flush with water for 15 minutes or until
irritation subsides. If irritation persists, get medical attention.
skin: remove contaminated clothing. Wash skin with soap and water.
if product i s injected into or under the skin, get medical
attention. Inhalation: if overcome by vapor from hot product,
remove to fresh air. If breathing is irregular or has stopped,
start resuscitation; adminis ter oxygen, if available. If
overexposed to oil mist, remove from futher exposure until
excessive oil mist condition subsides. Ingestion: do not induce
vomiting. Call a physician immediately.
Hcc: v5
boiling pt: b.P. Text: na
vapor pres: 0.009 mmhg @ 149c
vapor density: approx 17
spec gravity: 0.889
ph: na
viscosity: 6.1-6.7 cst @ 100f
solubility in water: very low solubility
appearance and odor: clear, oily liquid, mild, sweet odor.
percent volatiles by volume: na
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants such as liquid chlorine,
concentrated oxygen, sodium hypochlorite, calcium hypochlorite,
etc., as this presents a serious explosion hazard.
stability condition to avoid: this product is stable and will not react
violently with water.
hazardous decomposition products: fumes, smoke, carbon monoxide, sulfur
oxides, aldehydes, silicate esters and other decomposition
products, in the case of incomplete combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: assure conformity with applicable governmental
regulations. This product may be classified as an oil under section
311 of the clean water act. And under the pollution act. Discharges
or spills into or leading to surface waters that cause a sheen
must be reported to the national response center (1-80 0-424-8802).
Ingred name: organosilicate ester
minumum % wt: 90.
maxumum % wt: 95.
ingred name: aliphatic polyester
minumum % wt: 5.
maxumum % wt: 10.