Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Sealing Compound

NSN: 8030-00-142-9718 | Model: EPOCAST 1652 A/B

A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.

NSN Properties and Flags
NATO Stock Number
8030-00-142-9718
DEMIL
NO
Physical Form
Paste
Quantity Within Each Unit Package
5.000 gallons
Features Provided
Separate catalyst
Special Features
Low density syntactic epoxy two component system; room temp or elevated temp cure
Material
Plastic epoxy

Inventory Check

The last inventory check on this NSN was done on 09/19/2023. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 98

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8030-00-142-9718 Datasheet

Supply Class (FSC):
Preservative And Sealing Compounds
Cross Reference:
  • EPOCAST 1652 A/B
  • EPOCAST 1310
Cage Codes:
  • Huntsman Advanced Materials Americas (CAGE 99384)
Replacements:
  • 8030-00-142-9718 replaces 8030-01-324-2647
Schedule B & Trade:
  • Schedule B: 3214100010 (NAICS 325520)

    Caulking compounds

  • SITC: 53354

    Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations

  • End Use: 13210

    Shingles, molding, wallboard

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Questions & Answers:

What are the historical prices recorded for this stock number?
No pre-dated pricing for this NSN could be found.
Does NSN 8030-00-142-9718 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Columbia, Greece, and Turkey
What is the NIIN of NSN 8030-00-142-9718?
001429718 or 00-142-9718
Does NSN 8030-00-142-9718 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8030-00-142-9718?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Feb 03, 1969
MSDS

Material Safety

MSDS BDBWT EPOCAST 1310 A

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: severe eye and skin irritation.

explanation of carcinogenicity: vinyl cyclohexene dioxide is a suspected
human csrcinogen according to acgih.

effects of overexposure: severe eye and skin irritation. Skin
sensitizer.

medical cond aggravated by exposure: skin conditions.

First Aid

First aid: inhalation: immediately remove to fresh air. Give artificial
respiration if unconscious. Get prompt medical attention. Eye:
flush with large amounts of water for 15 minures. Get prompt
medical attenti on. Skin: wash thoroughly with soap andwater.

remove contaminated clothing. Ingestion: dilute by giving 2 glasses
of water if conscious. Get medical attention.

Chemical Properties

Hcc: n1
vapor pres:
vapor density: >1.0
spec gravity: 0.75
viscosity: soft paste
evaporation rate & reference:
solubility in water: appreciable
appearance and odor: tan colored soft paste, no odor.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, amines, acids and alkalies.

stability condition to avoid: high heat
hazardous decomposition products: during combustion carbon monoxide,
carbon dioxide and unidentified toxic fumes and/or vapors.

conditions to avoid polymerization: heat,amine or bases in bulk.

Proper Disposal

Waste disposal methods: disposal should be made in accordance with
federal, state and local regulations. Dilute with a suitable
flammable solvent; than incinerate.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin
cas: 28064-14-4
fraction by wt: 35%
acgih tlv: unk

ingred name: vinyl cyclohexene dioxide
cas: 106-87-6
rtecs #: rn8640000
fraction by wt: 20%
osha pel: s, 10 ppm
acgih tlv: s, 10 ppm ;a2; 9192

ingred name: mica - silicates (< 1% crystalline silica)
cas: 12001-26-2
rtecs #: vv8760000
fraction by wt: 10%
osha pel: 20 mppcf
acgih tlv: 3 mg/m3 rdust; 9293

ingred name: clay, organophoilic
cas: 71011-26-2
fraction by wt: 5%

ingred name: sodium borosilicate (silica filler)
fraction by wt: 30%
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3

MSDS BDBWV EPOCAST 9226(HARDENER)

Hazards

Effects of overexposure: eye irrit. And skin staining & skin burns

First Aid

First aid: flush eyes with water for 15 min. Get md. Wash skin contact
areas with soap and water. Launder solid clothes before reuse.

Chemical Properties

Hcc: n1
spec gravity: 1.20
solubility in water: slight
appearance and odor: dark amber viscous liquid with amine odor
percent volatiles by volume: 0.0

Reactivity

Stability indicator/materials to avoid: yes
strong acids,peroxides
hazardous decomposition products: phenol and amine fragments

Proper Disposal

Waste disposal methods: incinerate or react with resin and dispose of as
solid waste.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: phenol
cas: 108-95-2
rtecs #: sj3325000
osha pel: s, 5 ppm
acgih tlv: s, 5 ppm; 8990
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BKJFM EPOCAST 1652A

Hazards

Ld50 lc50 mixture: oral ld50: 20,000 mg/kg(rabbits),dermal
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: unknown iarc: yes
health hazards acute and chronic: inhalation: vapor or mists may
possibly be harmful if inhaled. Eye contact: moderately irritating
to eyes. Skin: slightly irritating to skin. Ingestion: possibly be
harmful if swallowed. Prolonged or repeated exposure can cause
allergic reaction. Also, repeated overexposure of dust may cause
delayed and serious injury.

explanation of carcinogenicity: this product contains crystalline silica
which is suspected of cancer hazard by iarc.

medical cond aggravated by exposure: allergy, eczema or skin conditions.

First Aid

First aid: inhalation: move subject to fresh air. Eye and skin contact:
flush eyes with a large amount of water for at least 15 minutes.

get prompt medical attention. Wash skin thoroughly with soap and
water. Re move and wash clothing before reuse. Ingestion: if
swallowed, dilute by giving 2 glasses of water to drink. See a
physician. Never give anything by mouth to an unconscious person.

Chemical Properties

Hcc: b3
vapor pres:
vapor density: >1
spec gravity: 0.70
viscosity: soft paste
evaporation rate & reference:
solubility in water: negligible
appearance and odor: white color soft paste, no odor.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, acids.

stability condition to avoid: elevated temperatures.

hazardous decomposition products: carbon monoxide and carbon dioxide.

conditions to avoid polymerization: acid or amine in bulk.

Proper Disposal

Waste disposal methods: incinerate in approved equipment. Incinerate or
landfill contaminated diking material in accordance with local,
state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: reaction products of epichlorohydrin and bisphenol a (sara
313) (california & pennsylvania right to know act)
cas: 1675-54-3
rtecs #: tx3800000
fraction by wt: 25%
other rec limits: none specified

ingred name: phenol-formaldehyde polymer, glycidyl ether (pennsylvania
right to know act)
cas: 28064-14-4
fraction by wt: 24%
other rec limits: none specified

ingred name: sodalime borosilicate glass (pennsylvania right to know
act)
cas: 65997-17-3
fraction by wt: 30%
other rec limits: fpc: 10 mg/m3
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3

ingred name: calcium silicate
cas: 1344-95-2
rtecs #: vv9150000
fraction by wt: 5%
other rec limits: fpc: 10 mg/m3
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9192

ingred name: mica - silicates (< 1% crystalline silica)
cas: 12001-26-2
rtecs #: vv8760000
fraction by wt: 10%
other rec limits: fpc: 3 mg/m3
osha pel: 20 mppcf
acgih tlv: 3 mg/m3 rdust; 9293

ingred name: castor oil, hydrogenated (pennsylvania right to know act)
cas: 8001-78-3
rtecs #: fi4130000
fraction by wt: 5%
other rec limits: none specified

ingred name: silica, crystalline - cristobalite
cas: 14464-46-1
rtecs #: vv7325000
fraction by wt: 1%
other rec limits: fpc: 0.05 mg/m3
osha pel: see table z3
acgih tlv: 0.05 mg/m3 rdust9293

MSDS BKJFN EPOCAST 1652B

Hazards

Ld50 lc50 mixture: orl ld50: 2,340 mg/kg(rat); derm ld50:
routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: inhalation: vapor or mists will
severely irritate the nose and throat. Eye contact: corrosive to
eyes; causes permanent, irreversible eye injury. Skin: corrosive to
skin; causes burns. Ingestion: subs tance will cause burning and
swelling of the mouth, throat and abdomen.

explanation of carcinogenicity: n/k 1,215 mg/kg (rabbits).

effects of overexposure: delayed effects: prolonged or repeated exposure
can cause allergic reaction.

medical cond aggravated by exposure: allergy, eczema eye or respiratory
conditions.

First Aid

First aid: inhalation: move subject to fresh air. Give artificial
respiration if breathing has stopped. Eye & skin contact: flush
eyes w/large amount water-15 minutes. Get prompt medical attention.

wash skin tho roughly w/soap & water. Remove & wash clothing before
reuse. Ingestion: if swallowed, dilute by giving 2 glasses water to
drink. See physician. Never give anything by mouth to an
unconscious person.

Chemical Properties

Hcc: f7
vapor pres: 5 @ 20 c
vapor density: >1
spec gravity: 0.98
viscosity: 800 cps
evaporation rate & reference:
solubility in water: appreciable
appearance and odor: amber color liquid, mild ammoniacal odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, mineral acids.

stability condition to avoid: excessive heat.

hazardous decomposition products: carbon monoxide, carbon dioxide and
oxides of nitrogen.

conditions to avoid polymerization: mineral acids.

Proper Disposal

Waste disposal methods: incinerate liquid; landfill or incinerate
contaminated diking material in accordance with local, state and
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: n-(aminoethylaminoethyl) imidazolidine (pennsylvania right
to know act)
fraction by wt: 70%
other rec limits: none specified

ingred name: hexahydrophthalimide of n-(aminoethylaminoethyl)
imidazolidine (pennsylvania right to know act)
fraction by wt: 10%
other rec limits: none specified

ingred name: ethanol, 2-(dimethylamino) (pennsylvania right to know act)
cas: 108-01-0
rtecs #: kk6125000
fraction by wt: 20%
other rec limits: none specified