Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Adhesive

NSN: 8040-00-145-0019 | Model: 2216 B/A GRAY

A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.

NSN Properties and Flags
NATO Stock Number
8040-00-145-0019
DEMIL
NO
Physical Form
Paste
Specific Usage Design
Structural adhesive for bonding rubber, metal, wood, most plastics and masonry
Features Provided
Separate catalyst
Special Features
Flexible
Color
Gray
Material
Plastic epoxy
Supplementary Features
2 ounce base and required amount of catalyst
Recent Solicitations
Solicitation Return by Date Buyer Code Quantity
SPE8ES18T3404 2018-02-26 PEPCE 4000 KT
SPE8E917T0363 2017-03-13 PEPCA 1870 KT
SPE8ES17T1512 2016-12-27 PEPCE 1800 KT
SPE8ES16T0334 2015-10-19 PEPCE 800 KT
SPE7M215T2171 2015-03-23 PMCMV 600 KT

Inventory Check

The last inventory check on this NSN was done on 02/01/2024. Due to rapid changes in inventory this may not be the current stock qty.

  • As Removed: 1
  • New: 24
  • New Surplus: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8040-00-145-0019 Datasheet

Supply Class (FSC):
Adhesives
Cross Reference:
  • 2216 B/A GRAY
  • C101051107
  • 1326989-01
  • SCOTCH-WELD 2216
  • M-7307
  • 550037-01
  • 005-0778-010
  • 5729363
  • 9360119-1
  • 9324181
  • 62-2216-0530-6
  • 1500AD1016-001
  • 2216 B/A
  • 2216 B/A
  • 1326989-01
  • EC2216 B/A
  • FS-9000-0667-7
Cage Codes:
  • 3m Company (CAGE 1A9T3)
  • Kearfott Corporation (CAGE 88818)
  • General Dynamics Mission Systems, (CAGE 3CYA2)
  • Pti Technologies Inc. (CAGE 05228)
  • Eldec Corporation (CAGE 08748)
  • Rockwell Collins, Inc. (CAGE 13499)
  • Naval Sea Systems Command (CAGE 53711)
  • Us Army Ardec Rdecom (CAGE 19200)
  • Bae Systems Information and (CAGE 72314)
  • 3m Company (CAGE 04963)
  • 3m Company (CAGE 52152)
  • General Dynamics Information Systems (CAGE 27963)
  • 3m Deutschland Gmbh (CAGE D2607)
Replacements:
  • 8040-00-145-0019 replaces 8040-00-788-2839
  • 8040-00-145-0019 replaces 8040-00-943-1496
  • 8040-00-145-0019 replaces 8040-01-039-5937
  • 8040-00-145-0019 replaces 8040-01-058-9502
  • 8040-00-145-0019 replaces 8040-01-081-3371
  • 8040-00-145-0019 replaces 8040-01-120-8743
  • 8040-00-145-0019 replaces 8040-01-187-3578
Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    004620 - Adhesives: cements, glues, pastes noi

  • WCC:

    705 - Cement, liquid

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    H
  • Quantity per pack
    12
  • Unit of Measure
    Kt
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    J2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $171.88 to $286.47..
Does NSN 8040-00-145-0019 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, U.s. Coast Guard, National Aeronautics and Space Administration, National Aeronautics and Space Administration, General Services Administration, Poland, Bulgaria, Brazil, Spain, Singapore, Australia, Canada, New Zealand, Germany, Republic Of Korea, United Kingdom, Netherlands, Portugal, Italy, Greece, and Turkey
What is the NIIN of NSN 8040-00-145-0019?
001450019 or 00-145-0019
Does NSN 8040-00-145-0019 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8040-00-145-0019?
Solicitation SPE8ES18T3404 for qty 4000 on 02/20/2018
When was this national stock number assigned to the federal catalog?
Apr 16, 1969
MSDS

Material Safety

MSDS BDCBR SCOTCHWELD 2216A ADHESIVE (TRANSLUCENT)

Hazards

Effects of overexposure: eye: extr irrt may cause perm eye
damage.Skn: irrt&sens.Inhal: irrt.Inges: irrt gi tract

First Aid

First aid: eye: flush copiously water 10 min. Skn: thorough wash soap &
water. Inh: remove to fresh air. Inges: drink two glasses milk or
water.Call physician,induce vomiting.

Chemical Properties

Hcc: n1
spec gravity: 0.97
viscosity: 7000 cp
solubility in water: insoluble
appearance and odor: amber paste
percent volatiles by volume: 0

HAZCOM Label

Document 1031731. 3m generic p/n in 62-3608-xxxx-x kit also known
as 2216b/a or 3m ec2216b/a (translucent) key1: n1.

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: co,co2, n, smoke particles on exposure
excess heat or flame

Proper Disposal

Waste disposal methods: observe all applicable regs before disposal.

cured resin (a&b): dispose in sand landfill. Spill: dispose of
cleanup matl by incneration.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: aliphatic amine
fraction by wt: 60.0%

MSDS BDCBS SCOTCHWELD 2216B ADHESIVE (TRANSLUCENT)

Hazards

Effects of overexposure: skn: may irrt w/prolonged contact.May
sensitize. Inhl: may irrt.Inges: possible gi tract irrt.

First Aid

First aid: eye: flush w/water 10 min & call phys. Skin: thoroughly wash
with soap & water. Inhl: remove to fresh air. Inges: considered non
toxic.

Chemical Properties

Hcc: n1
spec gravity: 1.17
viscosity: 14000 cp
solubility in water: insol
appearance and odor: transparent liquid
percent volatiles by volume: 0

HAZCOM Label

Document 103 1715. 3m generic p/n is 62-3508-xxxx-x. Kit also known
as 2216b/a or 3m ec2216b/a (translucent, or clear amber) key1: n1 .

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: none
hazardous decomposition products: co2,co,n, & smoke particulates when
exp excess heat,flame.

Proper Disposal

Waste disposal methods: check all appl regs. Cured resin may be disposed
in san land fill. Spill: dispose of cleanup matl by incineration.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: bisphenol a-epichlorohydrin resin
fraction by wt: 100%

MSDS BJXGJ SCOTCH-WELD2216B/A PT A GRAY EPOXY ADHESIVE

Hazards

Health hazards acute and chronic: eye: extremely irritating to eyes upon
direct contact. Dust from grinding, sanding or cutting operations
on the cured material may cause eye irritation. Skin contact: may
cause skin irritation upon prol onged contact. May cause an
allergic skin reaction in certain individuals. Inhalation: vapors
may be irritating to the *
effects of overexposure: *respiratory system. Dust from grinding,
sanding or cutting operations on the cured material may cause
respiratory system irritation. Ingestion: may cause digestive system
irritation.

medical cond aggravated by exposure: may cause an allergic skin reaction
in certain individuals.

First Aid

First aid: eye contact: flush with large amounts of water for at least 10
minutes. Call a physician. Skin contact: thoroughly wash affected
area with soap and water. Inhalation: remove person to
uncontaminated air. call a physician. If swallowed: do notinduce
vomiting. Immediately call a physician or poison control center.

Chemical Properties

Spec gravity: 1.260
viscosity: 52.0 cps
solubility in water: nil
appearance and odor: gray, paste, pungent odor
percent volatiles by volume: 0.00

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2, n and smoke particles when
subjected to excessive heat or flame.

Proper Disposal

Waste disposal methods: mix part a w/part b.Completely cure/dispose of
fully cured waste product in a sanitary landfill.Incinerate uncured
bulk product after mixing w/flammable mat'l in an indus/commercial
facility.Disposal should be in accordance with applicableregs.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: amine terminated polymer-n.J.Trade secret (t.S.) registry
no. 0449960-5569p
fraction by wt: 55-70%
other rec limits: none specified

ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt: 30-45%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 0.0-0.1%
other rec limits: none specified
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3; 9192

MSDS BJXGK SCOTCH-WELD(TM)2216 B/A PT B GRAY EPOXY ADH

Hazards

Health hazards acute and chronic: eye contact: irritating to eyes upon
direct contact. Dust from grinding, sanding or cutting operations
on the cured material may cause eye irritation. Skin contact: may
cause skin irritation upon prolon ged contact. May cause an
allergic skinreaction in certain individuals. Inhalation: vapors may
be irritating to the *
effects of overexposure: *respiratory system. Dust from grinding,
sanding or cutting operations on the cured product may cause
respiratory system irritation. Ingestion: may cause digestive system
irritation.

medical cond aggravated by exposure: may cause an allergic skin reaction
in certain individuals.

First Aid

First aid: eye contact: flush eyes with large amounts of water for at
least 10 min. Call a physician. Skin contact: thoroughly wash
affected area with soap and water. Inhalation: remove person to
uncontaminated air . Call a physician. If swallowed: do notinduce
vomiting. Immediately call a physician or poison control center.

Chemical Properties

Spec gravity: 1.330
viscosity: ca.100.0 cps
solubility in water: nil
appearance and odor: off-white, creamy paste, very slight epoxy odor.

percent volatiles by volume: 0.00

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2 and smoke particles when
subjected to excessive heat or flame.

Proper Disposal

Waste disposal methods: mix part a w/part b.Completely cure/dispose of
fully cured waste product in a sanitary landfill.Incinerate uncured
bulk product after mixing w/flammable mat'l in an
industrial/commercial facility.Disp ose in accordance with
applicable regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kd4380000
fraction by wt: 70-80%
other rec limits: none specified

ingred name: kaolinite
cas: 1318-74-7
fraction by wt: 20-30%
other rec limits: none specified

MSDS BNSYX SCOTCH-WELD (TM) 2216 PART A GRAY EPOXY ADH

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye: extremely irritating to eyes upon
direct contact. Dust from grinding, sanding or cutting operations
on the cured material may cause eye irritation. Skin: may cause
skin irritation upon prolonged contact. May cause allergic skin
reaction in certain individuals. Inhalation: vapors may be
irritating to respiratory
effects of overexposure: n/k system. If swallowed: may cause digestive
system irritation

First Aid

First aid: eye: flush eyes with large amounts of water for at least 10
minutes. Call a physician. Skin: thoroughly wash affected areas
with soap and water. Inhalation: remove person to uncontaminated
air. Call a physician. If swallowed: do not inducevomiting.

immediately call a physician or poison control center.

Chemical Properties

Hcc: n1
spec gravity: 1.260 (water=1)
viscosity: 52.0 cps
solubility in water: nil
appearance and odor: paste, gray, pungent odor.

percent volatiles by volume: 0.00

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2, n and smoke particles when
subjected to excessive heat or flame.

Proper Disposal

Waste disposal methods: mix part a w/part b. Completely cure & dispose
of fully cured waste product in sanitary landfill. Incinerate
uncured bulk product after mixing w/flammable material in
industrial/commercial facility. D isposal should be in accordance
w/applic regs.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: amine terminated polymer - nj - registry no 04499600-5569p
fraction by wt: 55-70%
other rec limits: none specified

ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt: 30-45%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: .01-0.1%
other rec limits: none specified
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3

MSDS BNSYY SCOTCH-WELD (TM) 2216 PART B GRAY EPOXY ADH

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: eye contact: irritating to eyes upon
direct contact. Dust from grinding, sanding or cutting operations
on the cured material may cause eye irritation. Skin contact: may
cause skin irritation upon prol onged contact. May cause an
allergic skin reaction in certain individuals. Inhalation: vapors
may be irritating to
effects of overexposure: n/k respiratory system. Dust from grinding,
sanding or cutting operations on the cured product may cause
respiratory system irritation.

First Aid

First aid: eye: flush eyes with large amounts of water for at least 10
minutes. Call a physician. Skin contact: thoroughly wash affected
area with soap and water. Inhalation: remove person to
uncontaminated air. call a physician. If swallowed: do notinduce
vomiting. Immediately call a physician or poison control center.

Chemical Properties

Hcc: n1
spec gravity: 1.330 (water=1)
viscosity: ca 100.0 cps
solubility in water: nil
appearance and odor: creamy paste, off-white, very slight epoxy odor.

percent volatiles by volume: 0.00

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: co, co2 and smoke particles when
subjected to excessive heat or flame.

Proper Disposal

Waste disposal methods: mix part a w/part b. Cure & dispose of fully
cured waste product in sanitary landfill. Incinerate uncured
product after mixing w/flammable mat'l in industrial or commercial
facility. Disposal should b e in accordance w/applicable
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 70-80%
other rec limits: none specified

ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt: 20-30%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9293

MSDS BPHGF SCOTCH-WELD 3911 METAL DEGREAS'G (SEE SUPP)

Hazards

Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: may defat the skin leading to
dermatitis. Continued or chronic overexposure by inhalation or
ingestion of large amounts may cause mild liver and kidney damage
and may adversely affect heart rhythm.Ext reme inhalation expos can
result in death.Solvent aspir into lungs may cause lung
damage,which can be fatal.

explanation of carcinogenicity: 1,4-dioxane: inadeq evid for carc in
hum;suff evid in anim (iarc,1987).Susp hum carc/known anim carc
(ntp,1989).(see sup)
effects of overexposure: eyes: liq/vap may cause irrit.Skin: may defat
causing dryness,cracking & irrit.Ingest: sm amt-could irritate
digest sys. Lrg amt-may cause naus,vomit,burns,lowered blood
press.Inhal: 1,1,1- trichloroethan e vap exceeding rec expos limits
may cause resp sys irrit & temporary nerv sys impairment (lt
head),dizz,naus,headache.

medical cond aggravated by exposure: n/k

First Aid

First aid: eyes: immed flush w/ h2o for at least 15 min.Call md.Skin: wash
w/ soap & h2o.Ingest: do not induce vomit.Call md or pois ctl
ctr.Inhal: immed give fresh air.Call md.Md note: 1,1,1-
trichloroethane may inc r "myocardial irritability".Do not admin
sympathomimetic drugs unless absolutely nec.If ingest: md decides
whether to induce vomit.If lavage performed,suggest
endotracheal/esophageal control. (see su

Chemical Properties

Hcc: t6
boiling pt: b.P. Text: 165f,73.9c
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: 120 mmhg
vapor density: 4 (air=1)
spec gravity: 1.37 (water=1)
evaporation rate & reference: 2.7 (water=1)
solubility in water: very slight.

appearance and odor: thin,clear liquid with sweet odor.

percent volatiles by volume: 85

Reactivity

Stability indicator/materials to avoid: yes
avoid contact w/ water,alcohol,amines,strong alkalies, oxidizers,and
reactive metals.

stability condition to avoid: n/k
hazardous decomposition products: carbon monoxide,carbon dioxide,hcl &
poss trace amounts of chlorine & phosgene when subjected to excess
heat or flame.

conditions to avoid polymerization: do not use pumps or pressurized
equipment which contain aluminum or zinc (galvanized) parts.

Proper Disposal

Waste disposal methods: disp iaw fed,state,& loc regs.Coordination w/
supporting installation/macom environ coordination before disp rec
to determ approp disp meth .Mix absorbed/bulk prod w/ flam matl &
incin in indus or commercial facility.Sara listed: (seesupp)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: calcium silicate.Acgih tlv total dust containing no
asbestos &
cas: 1344-95-2
rtecs #: vv9150000
fraction by wt: 10-20%
other rec limits: n/k
osha pel: 15 mg/m3 total dust
acgih tlv: 10 mg/m3 total dust

ingred name: 1,4-dioxane
cas: 123-91-1
rtecs #: jg8225000
fraction by wt:
other rec limits: n/k
osha pel: s, 100 ppm
acgih tlv: s, 25 ppm; 9293
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs

ingred name: 1,1,1-trichloroethane
cas: 71-55-6
rtecs #: kj2975000
fraction by wt: 80-90%
other rec limits: n/k
osha pel: 350 ppm
acgih tlv: 350 ppm
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ozone depleting chemical: 1

ingred name: organosilane
cas: 2530-83-8
rtecs #: vv4025000
fraction by wt: 1-10%
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k

ingred name: volatile organic compound: maximum voc=24 gm/l.Maximum voc
minus water minus exempt solvents=1178 gm/l.

rtecs #: 9999999vo
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k

MSDS BVGYS 2216 GRAY EPOXY ADHESIVE,PART B

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is not known.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory &
gi tracts. Acute- may cause eye irritation. Skin contact may cause
allergic reactions. Inhalation may cause upper respiratory
irritation. Ingestion may cause gas trointestinal tract irritation.

chronic- unknown.

explanation of carcinogenicity: none
effects of overexposure: irritation, redness, swelling, tearing, hazy
vision, itching, sore throat, coughing, sneezing, vomiting, nausea
medical cond aggravated by exposure: persons with pre-existing skin
disorders, eye problems or impaired respiratory function may be
more susceptible to the effects of this product.

First Aid

First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Eyes: any material that contacts the eye should be washed out
immediately with water. Skin: wash with soap & water. Oral: do not
induce vo miting. Drink two glasses of water. Seek medical
attention. Never give anything by mouth to an unconscious person.

Chemical Properties

Hcc: n1
nrc/state lic num: not relevant
spec gravity: 1.330
viscosity: not relevant
evaporation rate & reference: not relevant
solubility in water: nill
appearance and odor: off-white paste; very slight epoxy odor

Reactivity

Stability indicator/materials to avoid: yes
strong acids, strong oxidizing agents
hazardous decomposition products: carbon monoxide, carbon dioxide,
hydrocarbons, aldehydes, ketones, toxic vapors

Proper Disposal

Waste disposal methods: discharge, treatment or disposal may be subject
to federal, state or local regulations. Reusing is recommended.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin/bisphenol a-epichlorohydrin copolymer
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 70 - 80%
other rec limits: none recommended

ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
fraction by wt: 20 - 30%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 2 mg/m3 tdust; 9596

MSDS CKBQB S-W 2216 B/A PART A GRAY EPOXY ADHV. 32.

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: chemical related eye
burns(chemical corrosivity): cloudy appearance of cornea,chemiccal
burns,pain,tearing,ulcers,impaired vision/loss of vision.Vapors
from heated material may cause eye ir ritation.Dust created by
cutting,grinding,sanding,/machining may cause eye irritation.Skin
contact: allergic skin
reaction: redness,swelling,blistering,&itching.Mild skin irritation
redness,swelling&itc hing.*
effects of overexposure: *inh: irrtation(upper resp.Soreness of
nose&throat,coughing&sneezing.Vapors of heated material: resp.System
irrtation.Dust f/cutting,grinding,sanding,/machininng: irritation of
resp.System.Ingestion: irrt ation of gi
tissues: pain,vomiting,abdominal tenderness,nausea,blood in
vomitus&feces.Exposure in normal storage&handling has not been
reported-cause significant adverse health effects.Under normal pro
cessing conditions,e.G.Grinding/heating,may release fumes&vapors of
process releases may produce irritation/any health effects listed
above when emissions are present@elevated concentrations.Use w/app
ropriate local exhaust ventilation.

First Aid

First aid: eye contact: immediately flush eyes with large amounts of
water for at least 15 minutes. get immediate medical attention.

skin contact: immediately wash skin with soap and large amounts of
water. remove contaminated clothing. if signs/symptoms occur,
call a physician. wash contaminated clothing before reuse and
dispose of contaminated shoes. inhalation: if signs/symptoms
occur, remove pe rson to fresh air. if signs/symptoms continue,
call a physician. ingestion: if swallowed do not induce
vomiting. drink two glasses of water, call a physician.

Chemical Properties

Spec gravity: 1.26 (water= 1)
viscosity: 40000-80000 cps
appearance and odor: gray paste/ pungent odor

Reactivity

Stability indicator/materials to avoid: yes
heat is generated during cure. Do not cure a mass larger than 50-
grams in a confined space to prevent a premature reaction
(exothermic) with production of intense heat and smoke.

hazardous decomposition products: co, co2, oxides of nitrogen, amine
compounds, toxic vapors, gases or particulates.

Proper Disposal

Waste disposal methods: cure product according to product instructions.

incinerate uncured waste in an industrial or commercial
incinerator. dispose of completely cured (or polymerized) material
in a sanitary landfill.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: amine terminated polymer- n.J. Trade secret (t.S.) registry
no. 04499600-5569p
rtecs #: at1005687
minumum % wt: 55.

maxumum % wt: 70.


ingred name: caobin
cas: 1332-58-7
rtecs #: gf1670500
minumum % wt: 30.

maxumum % wt: 45.

osha pel: 10 mg/m3
acgih tlv: 2 mg/m3

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
minumum % wt: .01
maxumum % wt: .1
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3

MSDS CLKVL SCOTCH-WELD 2216 B/A PART B GRAY EPOXY ADHESIVE

Hazards

Effects of overexposure: eye contact: moderate eye irritation:
signs/symptoms can include redness, swelling,
pain, tearing, and hazy vision. Vapors from heated material may cause
eye
irritation. Dust created by cutting, grinding, sanding, or machining
may cause eye
irriatation. Skin contact: allergic skin reaction: signs/symptoms can
include reness,
swelling, blistering, and itching. Inhalation: irritation (upp er
respiratory) : signs/symptoms can include soreness of the nose and
throat, coughing and sneezing.

vapors of heated material may cause respiratory system irritation. Dust
from
cutting, grinding, s anding or machining may cause irritation

First Aid

First aid: eye contact: immediately flush eyes with large amounts of
water. Get immediate
medical attention. Skin contact: immediately wash skin with soap and
large
amounts of water. Remove contaminated cloth ing. If signs/symptoms
occur, call a
physician. Wash contaminated clothing before reuse and dispose of
contaminated
shoes. Inhalation: if signs/symptoms occur, remove person to fresh air.

if signs/s
ymptoms continue, call a physician. If swallowed: do not induce
vomiting. Drink two
glasses of water. Call a physician.

Chemical Properties

Spec gravity: 1.330 water=1
viscosity: 7500-150000 centipoise
solubility in water: nil
appearance and odor: creamy paste, off white, very slight epoxy odor.

percent volatiles by volume: 0.06

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: stong acids, strong oxidizing agents. Heat
is generated during cure. Do not cure a mass larger than 50 grams
in a confined space to prevent a premature reaction with production
hazardous decomposition products: carbon monoxide and carbon dioxide,
aldehydes, ketones, hydrocarbons, toxic vapors, gases or
particulates.

Proper Disposal

Waste disposal methods: cure product according to product instructions.

incinerate uncured waste in an
industrial or commercial incinerator. Dispose of completely cured (or
polymerized)
material in a sanitary landfill.

Ingredients List

Ingred name: epoxy resin
cas: 25068-38-6
code: f
rtecs #: ce6880000
minumum % wt: 70.

maxumum % wt: 80.


ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
minumum % wt: 20.

maxumum % wt: 30.

osha pel: 15 mg/m3
acgih tlv: 2 mg/m3

MSDS CLKVN SCOTCH-WELD (TM) 2216 PART A GRAY EPOXY ADH

Hazards

Effects of overexposure: eye contact: chemical related burns (chemical
corrosivity): signs/symptoms can
include cloudy appearance of the cornea, chemical burns, pain, tearing,
ulcers,
impaired vision or loss of vision. Skin contact: allergic skin
reaction: signs/symptoms
can include redness, swelling, blistering, and itching. Inhalation:
irritation (upper
respiratory) signs/symptoms can include soreness of the nose and
throat, coughing
and sneezing .If swallowed: irritation of gastrointestinal tissues:
sign/symptoms can
include pain, vomiting, abdominal tenderness, nausea, blood in vomitus,
and blood in
feces.

First Aid

First aid: eye contact: immediately flush eyes with large amounts of
water for at least 15
minutes. Get immediate medical attention. Skin contact: immediately
wash skin
with soap and water and large amounts of water. Remove contaminated
clothing. If
sign/symptoms occur, call a physician. Wash contaminated clothing
before reuse and
dispose of contaminated shoes. Inhalation: if signs/symptoms occur,
remove p erson to
fresh air. If sign/symptoms continue, call a physician. If swallowed;
do not induce
vomiting. Drink two glasses of water. Call a physician.

Chemical Properties

Spec gravity: 1.260
viscosity: 40,000-80,00cps
solubility in water: nil
appearance and odor: paste, gray, pungent odor.

percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
heat is generated during cure. Do not cure a mass larger than 50 grams
in a confined space in a confined apace to prevent a premature
reaction (exotherm) with production of intense heat and smoke.

hazardous decomposition products: carbon monoxide and carbon dioxide,
oxides of nitrogen, amine compounds, toxic vapors, gases or
particulates.

Proper Disposal

Waste disposal methods: cure product according to product instruction.

incinerate uncured waste in an
industrial or commercial incinerator. Dispose of completely cured (or
polymerized)
material in a sanitary landfill.

Ingredients List

Ingred name: aliphatic polymer diamine
cas: 68911-25-1
minumum % wt: 40.

maxumum % wt: 70.


ingred name: kaolin
cas: 1332-58-7
rtecs #: gf1670500
minumum % wt: 30.

maxumum % wt: 60.

osha pel: 15 mg/m3
acgih tlv: 2 mg/m3

ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
minumum % wt: .01
maxumum % wt: .08
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3