Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE8ES16T1726 | 2015-12-21 | PEPCE | 1 RO |
SPE8ES16T1189 | 2015-11-30 | PEPCE | 1 RO |
SPE8E515Q0700 | 2015-07-29 | PEPCA | 15 RO |
SPE8ES15T1722 | 2015-07-16 | PEPCE | 2 RO |
SPE8E515T8277 | 2015-06-22 | PEPCF | 15 RO |
SPE8E515T7876 | 2015-06-08 | PEPCF | 6 RO |
The last inventory check on this NSN was done on 05/03/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $7,561.13 to $12,601.88.. | |
Does NSN 8040-01-325-3009 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
New Zealand, Republic Of Korea, United Kingdom, Denmark, and Turkey | |
What is the NIIN of NSN 8040-01-325-3009? | |
013253009 or 01-325-3009 | |
Does NSN 8040-01-325-3009 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8040-01-325-3009? | |
Solicitation SPE8ES16T1726 for qty 1 on 12/31/1969 | |
When was this national stock number assigned to the federal catalog? | |
Aug 31, 1990 |
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: allergic reaction, irritation.
inhalation: lung injury, mild respiratory tract irritation/harmful.
explanation of carcinogenicity: none
effects of overexposure: skin: allergic reaction, irritation.
inhalation: lung irritation, mild respiratory tract
irritation/harmful.
medical cond aggravated by exposure: allergic reaction
First aid: eyes/skin: flush w/plenty of water for at least 15 mins while
removing contaminated clothing/shoes before reuse. Obtain med attn.
don't reuse contaminated clothing w/o laundering.
Appearance and odor: green tacky film
percent volatiles by volume: 1-2%
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: co, co2, hydrogen cyanide, ammonia,
oxides of nitrogen.
Waste disposal methods: disposal must be made in accordance w/applicable
governmental regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 0.8%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293
ingred name: graphite, natural
cas: 7782-42-5
rtecs #: md9659600
fraction by wt: 0-10%
osha pel: 15 mppcf rdust
acgih tlv: 2 mg/m3 rdust; 9293
ingred name: glass, fibrous
rtecs #: lk3651000
fraction by wt: 0-10%
other rec limits: 3000000 fb/cum
osha pel: 15 mg/m3 (dust)
acgih tlv: 10 mg/m3 (dust);9192
ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 0-2%
other rec limits: 590 mg/cum
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-inhalation: vapors of heated
material and dust from grinding, cutting or machining may cause
irritation of respiratory tract. Eyes: irritation. Skin: irritation,
allergic reactions. Ingestion: irrit ation of gi tract. Chronic: skin
sensitization.
effects of overexposure: skin: irritation, redness, swelling, itching.
inhalation: coughing. Ingestion: pain, vomiting, nausea, blood in
vomitous and feces.
medical cond aggravated by exposure: skin and lung disorders.
First aid: inhalation: remove to fresh air, provide cpr/oxygen if needed.
eye contact: flush with water for 15 minutes. Get medical help. Skin
contact: wash with soap and water. Get med attention if symptoms
persis t. Ingestion: do not induce vomiting, drink 1-2 glasses of
water. Get medical help immediately.
Hcc: n1
solubility in water: insoluble
appearance and odor: solid film, odorless.
percent volatiles by volume: 00
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat.
hazardous decomposition products: carbon monoxide, oxides of nitrogen,
hydrogen bromide and trace amounts okf bromine.
Waste disposal methods: incinerate uncured waste in an incinerator.
dispose of completely cured material in a sanitory landfill
according to local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dialkyl amine/phenolic epoxy resin/haloepoxy resin
fraction by wt: 40-70%
other rec limits: none recommended
ingred name: bisphenol a diglycidyl ether resin
cas: 1675-54-3
rtecs #: tx3800000
fraction by wt: 10-30%
other rec limits: none specified by m.
ingred name: bisphenol a-epichlorohydrin copolymer
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 3-7%
other rec limits: none specified by m.
ingred name: guanidine, cyano-(sicyandiamide); dicyandiamide
cas: 461-58-5
rtecs #: me9950000
fraction by wt: 3-7%
other rec limits: none specified by m.
ingred name: non-volatile amide
fraction by wt: .5-1.5%
other rec limits: none recommended
ingred name: n,n'-(methyl-1,3-phenylene)bis(n,n'-dimethylurea)
cas: 17526-94-2
fraction by wt: .5-1.5%
other rec limits: none recommended
ingred name: 1,4-bis(glycidyoxymethyl)cyclohexane
cas: 14228-73-0
fraction by wt: 1.5%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50(rat): 2700 mg/kg 2-butanone
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: primary irritation may produce
prolonged/repeated contact w/epoxy resins. Inhalation: overexposure
to vapor during heat may cause irritation/injury of the respiratory
tract. Eyes: irritation.
explanation of carcinogenicity: none
effects of overexposure: irritation.
medical cond aggravated by exposure: allergic skin reactions/primary
skin irritation.
First aid: skin: immediately wash areas w/soap & plenty of water. Obtain
medical attention in all cases.
Appearance and odor: yellow tacky film; odorless
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: temps
hazardous decomposition products: co, co2, hydrogen cyanide &/oxides of
nitrogen.
conditions to avoid polymerization: room temp, temp
Waste disposal methods: dispose of iaw/federal, state & local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide, titanium oxide (suspected animal
carcinogen, iarc group 3) *97-2*
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 0-0.8%
osha pel: 15 mg/cum
acgih tlv: 10 mg/cum (dust)
ingred name: methyl ethyl ketone, 2-butanone *97-2*
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 1-5%
other rec limits: 590 mg/cum
osha pel: 200 ppm
acgih tlv: 590 mg/cum
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: graphite
cas: 7782-42-5
rtecs #: md9659600
fraction by wt: 0-10%
other rec limits: 2.5mg/cum
acgih tlv: 2 mg/cum resp ic
ingred name: modified poly(aromatic glycidyl ether)*
fraction by wt: 60-100%
ingred name: fiberglass, fibrous (fiber) glass, glass fibers *97-2*
rtecs #: lk3651000
fraction by wt: 0-10%
other rec limits: 3000000 fb/cum
osha pel: 15 mg/cum
acgih tlv: 10 mg/cum
Ld50 lc50 mixture: oral ld50(rat): 2700 mg/kg (see supp)
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: overexposure to vapor during heat
curing may cause irritation/injury to respiratory tract & eye
irritation. Epoxy resins-prolonged/repeated skin contact may cause
irritation. 2-butanone (mek)-may caus e cns depression. Eyes: may
cause severe irritation. Skin: may cause moderate irritation.
explanation of carcinogenicity: none
effects of overexposure: irritation. Epoxy resins-irritation. 2-butanone
(mek)-irritation, headache, nausea, dizziness, staggered gait,
sleepiness.
First aid: skin: immediately wash affected areas w/soap & plenty of
water. Obtain medical attention in all cases.
Appearance and odor: yellow tacky film w/no odor.
percent volatiles by volume: 1-2/wt
Stability indicator/materials to avoid: yes
strong oxidizing agents.
hazardous decomposition products: by thermal decomposition/combustion:
co, co2, hydrogen cyanide &/oxides of nitrogen.
conditions to avoid polymerization: may occur slowly at room temp.
Waste disposal methods: dispose of organic materials classified as rcra
hazardous waste by thermal treatment/incineration at epa approved
facilities iaw/federal, state & local regulations. Cytec encourages
recycle, recovery & reuse of materials where permitted.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide, titanium oxide (suspected animal
carcinogen, iarc group 3) *97-1*
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 0-0.8%
osha pel: 10 mg/cum
acgih tlv: 10 mg/cum (dust)
ingred name: methyl ethyl ketone, 2-butanone *97-1*
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 1-5%
other rec limits: 590 mg/cum
osha pel: 200 ppm
acgih tlv: 200 ppm
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: fiberglass
fraction by wt: 0-10%
acgih tlv: 10 mg/cum
ingred name: graphite
cas: 7782-42-5
rtecs #: md9659600
fraction by wt: 0-10%
other rec limits: 2.5mg/cum
osha pel: 10 mg/cum
acgih tlv: 2 mg/cum resp ic
ingred name: epoxy resin
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: mild irrit.Vapors frm heated matl
may cause irrit.Dust created by cut/grind/sand/machine may cause
irrit.Skin: allergic skin reaction.Mild irrit(aft prol/rep
contact.Inhal: vapors of heated matl may cause respiratory sys
irrit.Dust from cut/grind/sand/machine may cause irrit of resp
tract.Ingst: irrit gi tissues.
effects of
overexposure: eye: redness,swelling,pain,tearing.Skin: redness,swellin
g,blistering,itching.Ingest: pain,vomiting,abdominal
tenderness,nausea,blood in vomitus,blood in fetus.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: immed flush w/lg amts of water.Get immed med
attn.Skin: flush w/lg amts of water.Irrit persists get med
attn.Inhal: signs/symptoms occur remove person to fresh
air.Signs/symptoms continue call physi cian.Ingest: dont induce
vomit.Drink 2 glasses of water.Call physician.
Hcc: n1
boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: n/determine
decomp temp: decomp text: np
vapor pres: na
vapor density: na
spec gravity: 1.53
ph: na
viscosity: na
evaporation rate & reference: na
solubility in water: not soluble
appearance and odor: film, unsupported solid film, odorless
percent volatiles by volume: 0.00
corrosion rate: np
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: avoid curing lg quant of matl to prevent
premature reaction(exotherm)w/production of intense heat & smoke.
hazardous decomposition products: co,carbon dioxide,oxides of
nitrogen,hydrogen bromide,toxic vapors,gases or particulates.Trace
amt of bromine.
Waste disposal methods: incinerate uncured wste in industrial or
commercial incinerator.Dispo of completely cured(or
polymerized)matl in sanitary landfill.Contains no haps.Since regs
vary consult applicable regs/authorities bef dispo.Epa haz
waste#: none.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dialkyl amine/phenolic epoxy resins/polyhaloepoxy resin
(trade secret)
fraction by wt: 40-70%
other rec limits: none recommended
ingred name: bisphenol a diglycidyl ether resin; epoxy resin
cas: 1675-54-3
rtecs #: tx3800000
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: bisphenol a-epichlorohydrin copolymer; epoxy resin
cas: 25068-38-6
rtecs #: sl6475000
fraction by wt: 3-7%
other rec limits: none recommended
ingred name: guanidine, cyano-(sicyandiamide); dicyandiamide
cas: 461-58-5
rtecs #: me9950000
fraction by wt: 3-7%
other rec limits: none recommended
ingred name: non-volatile amide, trade secret
fraction by wt: 0.5-1.5%
other rec limits: none recommended
ingred name: n,n'-(methyl-1,3-phenylene)bis(n,n'-dimethylurea)
cas: 17526-94-2
fraction by wt: 0.5-1.5%
other rec limits: none recommended
ingred name: 1,4-bis(glycidyoxymethyl)cyclohexane
cas: 14228-73-0
fraction by wt: 1.5%
other rec limits: none recommended
ingred name: polyamide nylon 6,6 resin or ingred #9
cas: 32131-17-2
other rec limits: none recommended
ingred name: poly(oxyethyleneoxyterephthaloyl); polyester, or ingred 10
cas: 25038-59-9
rtecs #: tr2725000
other rec limits: none recommended
osha pel: not established.
acgih tlv: not established.
ingred name: silica gel (glass cloth), support fabric
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: *
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: allergic reactions, irritation.
inhal: vapor during curing causes irritation/injury to respiratory
tract. Cns
depression/sleepiness/headache/nausea/dizziness/staggering. Eye:
irritation.
First aid: skin: wash w/soap & water. Remove contam clothes/shoes. Get
med aid. Destroy/thoroughly clean shoes before reuse. Wash contam
clothes before reuse.
Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
vapor pres: na
vapor density: na
spec gravity: na
ph: na
evaporation rate & reference: na
solubility in water: na
appearance and odor: yellow tacky film, odorless
percent volatiles by volume: 1-2
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none
hazardous decomposition products: carbon monoxide, carbon dioxide,
hydrogen cyanide/oxides of nitrogen
conditions to avoid polymerization: polymerization could occur slowly at
room temp. Store at 0f.
Waste disposal methods: recycle if possible. Dispose of by incineration
at epa facilities.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 0-0.8%
other rec limits: none recommended
osha pel: 10 mg/m3 ceiling
acgih tlv: 10 mg/m3 ceiling
ingred name: methyl ethyl ketone (2-butanone) (mek) (sara 313) (cercla)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 200 ppm/stel 300
acgih tlv: 200 ppm/stel 300
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: fiber glass
fraction by wt: 0-10%
other rec limits: none recommended
acgih tlv: 10 mg/m3
ingred name: graphite, natural
cas: 7782-42-5
rtecs #: md9659600
fraction by wt: 0-10%
other rec limits: none recommended
osha pel: 10 mg/m3/resp 5
acgih tlv: 10 mg/m3
ingred name: epoxy resins
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: mild eye irritation: signs/symptoms
can include redness, swelling, pain, and tearing. Skin contact:
allergic skin reaction: signs/symptoms can include redness,
swelling, blistering, and itching. Inhal ation: vapors of heated
material may cause respiratory system irritation. Ingestion may
cause: irritation of gastrointestinal tissues: signs/symptoms can
include pain, vomiting, abdominal tenderness,n ausea, blood in
vomitus, and blood in feces.
medical cond aggravated by exposure:
First aid: eye contact: immediately flush eyes with large amounts of
water. Skin contact: flush skin with large amounts of water.
inhalation: if signs/symptoms occur, remove person to fresh air.If
swallowed: do not induce vomiting. Drink two glasses of water.
Spec gravity: 1.53 water=1
solubility in water: not soluble
appearance and odor: film, unsupported solid film, odorless.
Stability indicator/materials to avoid: yes
stability condition to avoid: avoid curing large quntities of material
to prevent a premature reaction (exotherm) with production of
intense heat and smoke.
hazardous decomposition products: carbon monoxide and carbon dioxide,
oxides of nitrogen, hydrogen bromide, toxic vapors, gases or
particulates trace amounts of bromine.
conditions to avoid polymerization: may occur.
Waste disposal methods: incinerate uncured waste in an industrial or
commercial incinerator. Dispose of completely cured (or
polymerized) material in a sanitary landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 1675-54-3
code: f
rtecs #: tx3800000
minumum % wt: 10.
maxumum % wt: 30.
ingred name: dicyandiamide
cas: 461-58-5
rtecs #: me9950000
minumum % wt: 3.
maxumum % wt: 7.
ingred name: dimethylurea
cas: 17526-94-2
minumum % wt: .5
maxumum % wt: 1.5
ingred name: 1,4-bis.(.(2,3-epoxypropoxy)methyl.).Cyclohexane
cas: 14228-73-0
= wt: 1.5
ingred name: dialkyl amine/phenolic epoxy resins/ polyhaloepoxy
minumum % wt: 40.
maxumum % wt: 70.
ingred name: epoxy resin
cas: 25068-38-6
code: f
rtecs #: ce6880000
minumum % wt: 3.
maxumum % wt: 7.
ingred name: non-volatile amide trade secret
minumum % wt: .5
maxumum % wt: 1.5