Worldwide distributor of NSN parts and consumables located in the USA.
A fluid designed to reduce the amplitude of motion in order to obtain stable readings on indicators.
The last inventory check on this NSN was done on 03/06/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
030040 - Brake shock absorber etc fluid
609 - Petroleum products or derivatives, with flashpoint higher than 80 degrees (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
Q - 70.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $136.40 to $227.34.. | |
Does NSN 9150-00-024-9621 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Spain, Singapore, Australia, Republic Of Korea, and United Kingdom | |
What is the NIIN of NSN 9150-00-024-9621? | |
000249621 or 00-024-9621 | |
Does NSN 9150-00-024-9621 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-024-9621? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Ld50 lc50 mixture: oral-rat: 5g/kg
routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: acute: irritation of eyes,skin
possible;no serious health effects. chronic: no data available.
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: no data available.
First aid: eyes and skin: flush with plenty of water for 15 minutes.Call
a physician if needed. Inhalation: remove to fresh air;consult a
physician if needed.
Hcc: v6
boiling pt: b.P. Text: >572f/300c
melt/freeze pt: m.P/f.P text:
vapor density: >1.0
spec gravity: 0.90-0.97
solubility in water: negligible
appearance and odor: clear,colorless and odorless liquid.
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: extreme heat
hazardous decomposition products: co,co*2 & oxides of silicon
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethylsiloxane (silicone fluid)
cas: 63148-62-9
Ld50 lc50 mixture: ld50 (oral, rat) is >40,000 mg/kg.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: unknown. Acute- eyes: may
cause mild irritation. Skin/inhalation/ingestion: unknown. Chronic-
unknown.
explanation of carcinogenicity: none
effects of overexposure: mild eye irritation, discomfort, tearing
First aid: call physician if symptoms persist. Eye: immediately flush
with water for 15 minutes. Hold eyelids open. Skin: wipe off excess
with cloth. Wash skin with soap & water. Inhaled: remove to fresh
air. Oral: call physician.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: >400f,>204c
decomp temp: decomp text: 300f,149c
vapor pres: neg
spec gravity: 0.97
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: clear liquid - odorless
percent volatiles by volume:
Stability indicator/materials to avoid: yes
hazardous decomposition products: carbon monoxide, carbon dioxide,
formaldehyde
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 80 - 99%
other rec limits: none recommended
ingred name: volatile organic content as listed on msds:
rtecs #: 9999999vc
other rec limits: none recommended
osha pel: not relevant
acgih tlv: not relevant
Ld50 lc50 mixture: >5g/kg(rat)
routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: acute: slightly irritating to eyes and
skin.No serious effects related to exposure. chronic: no data
available.
effects of overexposure: see health hazards data
medical cond aggravated by exposure: no data available.
First aid: eyes: flush with plenty of water;call a physician if needed.
skin: wash with soap and water.
Hcc: v6
boiling pt: b.P. Text: >572f/300c
melt/freeze pt: m.P/f.P text:
vapor density: >1.0
spec gravity: 0.90-0.97
solubility in water: negligible
appearance and odor: liquid,clear,colorless,odorless
Stability indicator/materials to avoid: yes
n/k to mfr
stability condition to avoid: extreme heat
hazardous decomposition products: co,co*2,sio*2
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethylsilicone (polydimethylsiloxane)
cas: 63148-62-9
Effects of overexposure: may cause temprary discomfort to eyes or
irritation to skin or respiratory tract.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
boiling pt: b.P. Text: >300f/149c
vapor pres:
spec gravity: 0.97
evaporation rate & reference: < 1.0 (ether=1)
solubility in water: negligible
appearance and odor: very little odor,liquid,no color.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing material
hazardous decomposition products: silicon dioxide,carbon
dioxide,incomplete burned carbon prod
Waste disposal methods: review all local,state & federal regulations to
determine approved disposal procedures.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethylpolysiloxane
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt: 100%
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: mild irritating to eyes or
possible skin irritation;not likely inhaled,low toxicity.
chronic: no data available.
explanation of carcinogenicity: no data available.
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: no data available.
First aid: eyes: flush with plenty of water for about 15-20 minutes;seek
medical attention. Skin: wash with soap & water. Inhalation: not
likely to inhale;seek medical attention. Ingestion: induce
vomiting;seek medi cal attention.
Hcc: v6
melt/freeze pt: m.P/f.P text: -65f,-54c
vapor pres: 0.01
spec gravity: 0.97
solubility in water: negligible
appearance and odor: paste like polymer,clear,colorless.
Stability indicator/materials to avoid: yes
mineral acid,strong base.
stability condition to avoid: extreme heat.
hazardous decomposition products: oxides of carbon and silica.
Waste disposal methods: dispose of collected material in accordance with
local,state & federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethylsiloxane
cas: 9016-00-6
rtecs #: tq2690000
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: no evidence of adverse effects
per msds.May cause irritation of eyes and skin.
explanation of carcinogenicity: data per msds
effects of overexposure: may cause irritation of eyes and skin.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
boiling pt: b.P. Text: >200f,>93c
vapor pres:
vapor density: >1.0
spec gravity: 0.97
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: clear colorless liquid,low odor
Stability indicator/materials to avoid: yes
none noted
stability condition to avoid: high temperatures
hazardous decomposition products: carbon monoxide, carbon dioxide and
other unidentified components.
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicon fluid;(polydimethylsiloxane)
cas: 63148-62-9
fraction by wt: 100.0%
other rec limits: none specified
ingred name: volatile organic compounds(per california rule)
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: nontoxic, non-irritating
explanation of carcinogenicity: this product is not listed by iarc, ntp,
or osha as a carcinogen.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with running water for 15 minutes while holding
eyelid. Skin: wash with soap & water. Remove contaminated clothing.
ingestion: do not induce vomiting. Give nothing by mouth if
unconscious. get medical attention.
Hcc: v6
boiling pt: b.P. Text: nonvolatile
vapor pres:
vapor density: 8.0
spec gravity: 0.973
viscosity: 500 c/s @ 77f
evaporation rate & reference: n/r (n-butyl acetate=1)
solubility in water: negligible
appearance and odor: clear, colorless liquid. No odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: incineration is best. Open burning is
satisfactory if a white smoke is not objectionable. Disposal should
be made in accordance with all applicable federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethyl siloxane
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt: 100%
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is >40,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eye contact: may cause mild
irritation. Skin/inhalation/ingestion: none known.
prolonged/repeated skin contact may cause irritation. Chronic- none
known. May cause skin irritation and dermatiti s.
effects of overexposure: mild eye irritation.
medical cond aggravated by exposure: none known.
First aid: inhalation: move to fresh air. Seek medical attention if
needed. Eyes: immediately flush with water for 15 minutes holding
eyelids open. Seek medical care if symptoms persist. Skin: wash
with soap and water. Ingestion: rinse mouth with waterseveral
times. Seek medical assistance if necessary.
Hcc: v6
boiling pt: b.P. Text: >400f,>204c
vapor pres: negligible
spec gravity: 0.97
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: clear liquid - odorless
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide,
formaldehyde
Waste disposal methods: disposal must be done in accordance with
federal, state and local laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicon fluid/dimethylpolysiloxanes
cas: 63148-62-9
fraction by wt: 80 - 99%
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation: this is a viscous fluid
that does not easity form a mist or vapor and , therefore,
inhalation hazards are minimal. ingestion: low acute oral
toxicity. eyes and skin: non-irritating.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: no data found.
First aid: eyes: wipe off excess with a clean gause pad or cotton and
then flush with plenty of water for at least 15 min. Lift upper and
lower lids and rinse well under them. Get medical attention if
irritation persists. skin: wipe off excess with a clean cloth and
then wash with soap and plenty of water. ingestion: induce
vomiting immediately by giving two glasses of water & sticking
finger down throat.
Hcc: v6
melt/freeze pt: m.P/f.P text: -65f,-54c
vapor pres: 0.01
spec gravity: 0.96
solubility in water: insoluble
appearance and odor: clear, viscous liquid. Odorless.
Stability indicator/materials to avoid: yes
strong acids, bases and oxidizing agents.
stability condition to avoid: avoid heat and open flames.
hazardous decomposition products: silica and oxides of carbon.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethyl siloxane
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt: 100%
other rec limits: none specified
Ld50 lc50 mixture: ld 50 oral rat is > 5000 mg/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: on the basis of animal toxicity
testing, this product is expected to be non-irritating to the eyes
and skin and essentially non-toxic by ingestion. This product can
form an oil film on the eyeball whi ch may cause a temporary
harmless and reversible clouding of vision. No chronic effects
expected.
explanation of carcinogenicity: none of the ingredients in this product
is listed by ntp, iarc or osha as a carcinogen.
effects of overexposure: clouded vision.
medical cond aggravated by exposure: none known
First aid: in case of eye contact, flush eyes with plenty of water for
at least 15 minutes. Call a physician if irritation persists. In
case of skin contact, remove product mechanically, then wash with
soap and water. If swallowed, call a physician.
Hcc: v6
vapor pres:
spec gravity: 0.971
viscosity: 500 cst @ 77f
solubility in water: insoluble
appearance and odor: colorless liquid. Odorless
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: excessive temperatures.
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon oxide, small amount of formaldehyde.
Waste disposal methods: waste disposal should be in accordance with
existing federal, state and local environmental regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicon fluid
cas: 63148-62-9
fraction by wt: 100%
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: nontoxic, non-irritating
explanation of carcinogenicity: mfr listed no information about the
carcinogenicity of this material. Hmis does not expect it to be
carcinogenic.
effects of overexposure: no information given on msds by mfr.
medical cond aggravated by exposure: no information given on msds by
mfr.
Hcc: v6
nrc/state lic num: none
boiling pt: b.P. Text: non-volitl
vapor pres:
vapor density: 8.0
spec gravity: 0.973
solubility in water: negligible
appearance and odor: clean, colorless, odorless liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none
hazardous decomposition products: no information given on msds by mfr.
conditions to avoid polymerization: will not occur
Waste disposal methods: incineration is best. Open burning is
satisfactory if a white smoke is not objectionable.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethylsiloxane
fraction by wt: 100%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) > 5,000 mg/kg
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: none. Acute - eye:
non-irritating. May cause foreign body irritation only. Skin:
non-irritating. Low acute dermal toxicity. Inhalation. Inhalation
is not likely. Ingestion: low acute or al toxicity. Chronic effects
- this product does not contain any ingredient designated by iarc,
ntp, acgih or osha as probable or suspected human carcinogens.
explanation of carcinogenicity: none
effects of overexposure: none
First aid: get medical help if symptoms persist. Inhalation: inhalation
is not an expected route of exposure. If respiratory irritation or
distress occurs, remove victim to fresh air. Eye exposure:
immediately a bsorb excess with clean absorbent clothor cotton.
then, hold eyelids open and flush with a steady, gentle stream of
water for at least 15 minutes. Skin exposure: wipe excess off skin
with a dry cloth ; then wash skin with plenty of soap and water.
ingestion: if conscious and alert, drink 1-2 glasses of water. Get
medical attention. Never give anything by mouth to an unconscious
person. Do not leav e victim unattended.
Hcc: v6
melt/freeze pt: =-54.C, -65.2f
decomp temp: =148.9c, 300.F
vapor pres:
spec gravity: >0.96 at 25c (77f)
solubility in water: insoluble
appearance and odor: clear odorless viscous liquid
Stability indicator/materials to avoid: yes
strong bases, strong acids, strong oxidizing agents.
stability condition to avoid: heat, open flame, spark. Stable under
normal handeling and storage conditions.
hazardous decomposition products: decomposition type: thermal:
dimethylcyclosiloxanes, methylphenylcyclosiloxanes, formaldehyde,
carbon monoxide, carbon dioxide
Waste disposal methods: chemical additions, processing or otherwise
altering this material may make waste management presented here
incomplete and inaccurate. Dispose of waste in accordance with
local, state, and federal reg ulations. This is not an epa
hazardous waste. Decontaminate any containers or equipment after
use im mediately.
Ingred name: poly(dimethylsiloxane)
cas: 63148-62-9
rtecs #: jt6484500
other rec limits: none recommended