Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Engine Lubricating Oil

NSN: 9150-00-111-0201 | Model: ASHLANDAR0IL30

A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.

NSN Properties and Flags
NATO Stock Number
9150-00-111-0201
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Minimum Viscosity Index
75.0
Service Characteristics
Any acceptable
Quantity Within Each Unit Package
1.000 pints
Viscosity At Rated Temp
9.30 100 degrees c and 12.50 100 degrees c
Maximum Pour Point
-18.0 degrees celsius
Minimum Flash Point And Test Method
220.0 degrees celsius cleveland open cup
Nondefinitive Specification/std Data
30 grade

Inventory Check

The last inventory check on this NSN was done on 10/12/2022. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 18
  • New Surplus: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-111-0201 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • ASHLANDAR0IL30
  • MIL-L-21260
  • SUNS0LVENTREFINED2650A
  • BRAYC0443V30
  • TECTYL873SAE30
  • REMARK0P04
Cage Codes:
  • Ashland Oil Inc (CAGE 81355)
  • Military Specifications (CAGE 81349)
  • Sunoco Inc. (CAGE 78628)
  • Castrol Industrial North America (CAGE 98308)
  • Valvoline Inc (CAGE 72527)
  • Refiners Marketing Co (CAGE 86737)
Schedule B & Trade:
  • Schedule B: 2710193020 (NAICS 324110)

    Automotive, diesel or marine engine (except turbine) lubricating oils

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    145000 - Oil o/t petro lubricating noi

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    V
  • Quantity per pack
    1
  • Unit of Measure
    Pt
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $2.96 to $4.93..
Does NSN 9150-00-111-0201 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Republic Of Korea, Greece, and Turkey
What is the NIIN of NSN 9150-00-111-0201?
001110201 or 00-111-0201
Does NSN 9150-00-111-0201 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-111-0201?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Aug 21, 1968
MSDS

Material Safety

MSDS BCYZS MIL-L-21260C,LUBE OIL,INTRNL COMBUSTION ENG

Hazards

Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.

First Aid

First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700c
vapor pres: .01
vapor density: 0.1
spec gravity: 0.89
solubility in water: negligible
appearance and odor: fluid oil-blend(liquid)

Reactivity

Stability indicator/materials to avoid: yes
not known
stability condition to avoid: avoid ignition sources
hazardous decomposition products: co if incomplete combustion

Proper Disposal

Waste disposal methods: eliminate ignition sources. Destroy by liquid
incineration. Incineration will be easier by mixing with a more
flammable solvent. Handle & dispose in full compliance with all
applicable international,f ed,state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: 89.0%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192

ingred name: lubrizol 1165
fraction by wt: 11.0%

ingred name: zinc diakyl dithiophosphate (a part of addition in
lubrizol)

ingred name: zinc diaryl dithiophosphate (a part of additive in
lubrizol)

MSDS BMDLT MIL-L-21260C GRADE 30

Hazards

Ld50 lc50 mixture: oral ld50 (rat) = 10 g/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: ingestion: low toxicity. May
cause vomiting and diarrhea.Small amount aspirated into lungs will
cause lung injury. Inhalation: inhalation of mist/vapors/fumes may
cause respiratory tract irritatio n. Eye: irritation. Skin: repeated
contact may cause irritation. Chronic: none anticipated.

explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.

effects of overexposure: skin, eye and respiratory irritation., vomiting
and diarrhea.

medical cond aggravated by exposure: persons with a skin and pulmonary
disorders should use caution when handling or using this product.

First Aid

First aid: skin: remove contaminated clothing. Wash with soap and water.

get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.

eye: i mmediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.

Chemical Properties

Hcc: v6
vapor density: >air
spec gravity: 0.892

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide and carbon dioxide,
smoke and oxides of nitrogen and sulfur.

Proper Disposal

Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil
fraction by wt: 80-90%
other rec limits: none specified
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist

ingred name: additive package containing nitrogen, zinc, calcium, sulfur
and phosphorus.

fraction by wt: 5-10%
other rec limits: none specified

ingred name: lubrizol 7559
fraction by wt: 7.1%
other rec limits: none specified

ingred name: lubrizol 1161
fraction by wt: 2.2%
other rec limits: none specified

MSDS BPFPP SUNS0LVENTREFINED 2650A, SR 2650 SAE 50

Hazards

Ld50 lc50 mixture: ld50, rats is >25,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: inhalation: no acute effects to twice
exposure limits. Skin: practically non-toxic if absorbed (ld50
greater than 2000 mg/kg). No skin effects expected. Eyes: contact
with the eye may cause mild irrit ation. No permanent damage
expected. Ingestion: practically non-toxic.

explanation of carcinogenicity: proprietary detergent additive
containing calcium, sulfur, prosphorus,zinc, zinc hydroxy(alklated)
benzoate plus others.

effects of overexposure: see health hazards (acute & chronic).

medical cond aggravated by exposure: prior skin disorders.

First Aid

First aid: skin: wash with soap and water until no odor remains. Wash
clothing before reuse. Inhalation: none normally required. Eye:
flush thoroughly with water. Ingestion: give liquids and induce
vomiting unle ss victim is unconscious. Obtain emergency medical
attention. Small amounts which accidentally enter mouth should be
rinsed out until taste of it is gone.

Chemical Properties

Hcc: v6
spec gravity: 0.90
solubility in water: negligible
appearance and odor: dark fluid, slight odor.

percent volatiles by volume: nil.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: extreme heat.

hazardous decomposition products: carbon monoxide and asphyxiants

Proper Disposal

Waste disposal methods: consult your local environmental officer. Follow
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

MSDS BWMBW MIL-L-21260 GRADE 30;19115

Hazards

Ld50 lc50 mixture: tlv for oil mist is 5mg/m3
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: low health hazard. Minimal
irritation on contact. Inhalation of vapors or mists when spraying
may cause irritation. Slightly toxic if swallowed.May cause lung
damage if vomited after ingesting. Chronic: dermatitis. Release
under high pressure may result in injection of oil into the skin
causing local necrosis.

explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.

effects of overexposure: eyes: minimal irritation. Skin: irritation,
skin drying on prolonged contact. Inhalation: irritation of nose
and throat. Ingestion: discomfort, nausea, diarrhea. Injection:
necrosis may be evidenced b y delayed onset of pain and tissue
damage a few hours following pressure injection.

medical cond aggravated by exposure: because of its defatting
properties, prolonged and repeated skin contact may aggravate an
existing dermatitis.

First Aid

First aid: eyes: flush with plenty of water for at least 15 minutes. If
irritation persists, see doctor. Skin: wash with soap. If
irritation persists, see doctor. Inhalation: remove victim to fresh
air. Give oxy gen/cpr if needed. See doctor. Ingestion: do not
induce vomiting. See doctor. Injection: this is a medical
emergency. See doctor immediately.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 500f,260c
melt/freeze pt: m.P/f.P text: 20.0f,-6.7c
vapor pres:
vapor density: 5
ph: 7
viscosity: 116cst
evaporation rate & reference: 0.01 (n-butyl acetate=1)
solubility in water: negligible
appearance and odor: pale oily liquid.

percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon dioxide,carbon monoxide,oxides
of sulfur,aldehydes.

Proper Disposal

Waste disposal methods: dispose of in accordance with federal,state and
local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: severely solvent refined & severely hydrotreated mineral
base oils
other rec limits: none recommended

ingred name: mineral oil, petroleum distillate, solvent dewaxed (mild),
heavy paraffinic
cas: 64742-65-0
rtecs #: py8038500
other rec limits: none recommended

ingred name: mineral oil, hydrotreated (mild), heavy naphthenic
distillate, petroleum
cas: 64742-52-5
rtecs #: py8035000
other rec limits: none recommended

MSDS CFYKY 104500 GARD ANTI RUST SAE 30

Hazards

Ld50 lc50 mixture: oral toxicity not determined
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: contain matls that can cause mild
irrit w/discomft,tear,blurr vision.Based on data frm similar
matls.Skin: avoid prol skin contact.Contains matls that may cause
irrit.Prol/rep contact may result in derm(dryness,chap,red).Based
on compo data/data frm similar matls.Inhal: overexpo by inhal of hot
matl may cause (sup)
explanation of carcinogenicity: per msds: carcinogenicity: not determined.

effects of overexposure: risk of pum disease such as chronic lung
inflamm.Asymptotic resulted frm rep sm aspirations.Shortness of
breath/cough.Skin more sensitive to toher skin sensitizers.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye: immed flush w/lg amts of h2o;cont til irrit
subsides.Irrit persist call dr.Matl hot treat for thermal
burns.Take to hosp.Skin: remove contan cloth.Red/irrit occurs get
med attn.Matl hot submerg in cold h2o.Severely burn move to hosp
immed.Inhal: overcome by hot vap remove to fresh air.Diffi breath
use oxy;stop breath art resp.Get immed med attn if
necessary.Oral: dont induce vomit(other precaut)

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
melt/freeze pt: m.P/f.P text: np
decomp temp: decomp text: np
vapor pres: negligible
vapor density: >1 @stp
spec gravity: 0.89
ph: np
viscosity: 11.5cst @100c
evaporation rate & reference: negligible @stp
solubility in water: negligible
appearance and odor: mild petroleum hydrocarbon odor, dark brown color,
clear fluid
percent volatiles by volume: neglig
corrosion rate: np

Reactivity

Stability indicator/materials to avoid: yes
avoid contact w/acids and oxidizing materials.

stability condition to avoid: avoid high temperatures and product
contamination.

hazardous decomposition products: oxides of c,zn,ca,p&s.Addtn byproducts
include hydrogen sulfide,alkyl mercaptans & other
sulfides.Smoke,co,co2,aldehydes

Proper Disposal

Waste disposal methods: comply w/fed/state/loc regs.Matl spill/discard
may be reg waste.Ref: state/loc regs.Dot regs may apply for transpo
spill matl.Caut: spill matl clean up w/reg solvt,result waste mix
may be reg.Rcra user responsible to determine haz
waste.Reclaim/inciner
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: aliphatic hydrocarbons
fraction by wt: 80-90%
other rec limits: none recommended

ingred name: proprietary additives
fraction by wt: 10-20%
other rec limits: none recommended

ingred name: alkaryl ethoxylated ethanol
fraction by wt:
other rec limits: none recommended

ingred name: phosphorodithoic acid, o-o-d1 c1-14-alkyl esters, zinc
salts (2: 1) (zddp)
cas: 68649-42-3
fraction by wt:
other rec limits: none recommended