NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of aircraft components such as actuators, engine accessories, control bearings, landing gears, and wheel bearings. It does not include grease, aircraft and instrument and grease, instrument.
The last inventory check on this NSN was done on 08/27/2020. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
090960 - Lubricating grease noi
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,859.27 to $3,098.79.. | |
| Does NSN 9150-00-935-5851 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, Federal Aviation Administration, U.s. Coast Guard, Poland, Bulgaria, Brazil, Spain, Singapore, Australia, Canada, New Zealand, France, Republic Of Korea, United Kingdom, Philippines, Italy, Norway, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 9150-00-935-5851? | |
| 009355851 or 00-935-5851 | |
| Does NSN 9150-00-935-5851 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-935-5851? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Oct 04, 1967 | |
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
effects of overexposure: irritation as noted in health hazards
section.Local necrosis is evidenced by delayed onset of pain and
tissue damage a few hours after injection.
medical cond aggravated by exposure: preexisting eye and skin disorders
may be aggravated by exposure to this product.
First aid: get medical attention.Inhalation: remove to fresh air.Give
oxygen if needed.Ingestion: do not induce vomiting.No treatment is
necessary unless large amount of product is ingested.Eye: flush with
water fo r 15 minutes while holding eyelids open.Skin: wipe excess
off.Wash with soap & water/a waterless hand cleaner followed by
soap & water.
Hcc: v6
solubility in water: insoluble
appearance and odor: brown, smooth, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid heat and open flames.
hazardous decomposition products: airborne solid,liquid,particulates and
gases.Carbon monoxide and other unidentified organic compounds.
Waste disposal methods: dispose of in accordance with all local, federal
and state regulations. This is an oil. Spills into surface water
must be reported to the national response center, 800-424-8802.This
product contains c hromium compounds.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
cas: 68037-01-4
fraction by wt: 70 - 80%
other rec limits: none specified
ingred name: organophilic clay
cas: 71011-25-1
fraction by wt: 5 - 10%
other rec limits: none specified
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
other rec limits: none specified
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: sodium chromate (sara iii)
cas: 7775-11-3
rtecs #: gb2955000
fraction by wt:
other rec limits: none specified
osha pel: 0.1 ppm cro3;ceiling
acgih tlv: 0.05 mg cr/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: synthetic ester
cas: 103-24-2
fraction by wt: 1 - 2%
other rec limits: none specified
ingred name: other components (type not specified)
fraction by wt: 4.0%
other rec limits: none specified
Effects of overexposure: eyes: irritation;skin: dermatitis oil
acne;inhal: irrit.Of respiratory tract;ingest: g.I.Dist.Diarrhea.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
solubility in water: negligible
appearance and odor: amber buttery clay thickened grease with a sl.Odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat,open flames.
hazardous decomposition products: co and unidentified org-compds may be
formed upon combustion
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic hydrocarbon
fraction by wt: >73%
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: other components (unidentified)
fraction by wt:
acgih tlv: not specified
Ld50 lc50 mixture: ld50 oral rat=5g/kg
routes of entry: inhalation: no skin: no ingestion: no
health hazards acute and chronic: see signs and symptoms of
overexposure.
effects of overexposure: not expected to be a problem.
eyes/skin: expected to be non-irritating. Inhalation: not applicable.
oral/dermal: slightly toxic.
medical cond aggravated by exposure: none noted.
First aid: eyes: flush with water. Skin: wash with soap & water.
inhalation: not expected to be a problem. Ingestion: not expected to
be a problem. However,if more than 1 pint is ingested,give 1 or 2
glasses of wate r & see doctor. Do not induce vomit. Nothing by
mouth if unconscious.
Hcc: v6
boiling pt: b.P. Text: 600f(316c)
vapor pres: 0.1
spec gravity: 0.887
solubility in water: negligible
appearance and odor: red grease,mild odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: heat,sparks,open flames
hazardous decomposition products: co gas
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic oils ;take tlv as oil mist
fraction by wt: 70%
osha pel: 5mg/m*3 (oil mist)
acgih tlv: 5mg/m*3 (oil mist)
ingred name: additives and/or other ingreds
fraction by wt: 30%
ingred name: acetone (sara iii)
cas: 67-64-1
rtecs #: al3150000
fraction by wt: 2%
osha pel: 1000ppm
acgih tlv: 750ppm/1000stel;9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: benzenepropanoic acid, 3,5-bis
cas: 2082-79-3
fraction by wt: < 2% %
other rec limits: none recommended
ingred name: benzenamine, n-phenyl-
cas: 68411-46-1
fraction by wt: < 2% %
other rec limits: none recommended
ingred name: phenyl-alpha-naphthylamine
cas: 90-30-2
fraction by wt: < 2% %
other rec limits: none recommended
ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
fraction by wt: 1.44% %
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3; 9394
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 1.02% %
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 0.09% %
other rec limits: none recommended
acgih tlv: 5 mg/m3 (oil mist)
ingred name: beta-naphthylamine (sara iii)
cas: 91-59-8
rtecs #: qm2100000
fraction by wt: 0.001% %
other rec limits: none recommended
osha pel: see 1910.1009
acgih tlv: a1; 9394
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: alpha-naphthylamine (sara iii)
cas: 134-32-7
rtecs #: qm1400000
fraction by wt: 0.001% %
other rec limits: none recommended
osha pel: see 1910.1004
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of eyes and skin;cns
effects like headache,dizziness,nausea,vomiting;chronic: drying of
skin,defatting or dermatitis.
explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
solubility in water: negligible
appearance and odor: smooth amber grease.Slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: no*x,co & other unident oxygenates can
form during combust
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
fraction by wt: 86%
ingred name: alkylated aromatic amines (accd to mfr: oral ld50,rat >10
g/kg)
fraction by wt: 3%
ingred name: sodium hydroxide (sara iii)
cas: 1310-73-2
rtecs #: wb4900000
fraction by wt: 0.5%
osha pel: 2 mg/m3
acgih tlv: c 2 mg/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 0.5%
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: amitrole (sara iii)
cas: 61-82-5
rtecs #: xz3850000
fraction by wt:
osha pel: 0.2 mg/m3
acgih tlv: 0.2 mg/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin. Acute- may be
mildly irritating to eyes. Prolonged/repeated skin contact may
cause dermatitis. Injectio, folliculitis, or oil acne. injection
under skin causes local necrosis . Inhalation of vapors (formed at
high temperatures)/oil mist may cause irritation. No specific
information identified for ingestion. Chronic- dermatitis.
explanation of carcinogenicity: this product & its components are not
classified as carcinogens by iarc, ntp or osha.
effects of overexposure: iirritation as previously noted. Local necrosis
is evidenced by delayed onset of pain & tissue damage a few hours
following injection.
medical cond aggravated by exposure: persons with pre-existing skin
disorders may be aggravated by exposure to this product.
First aid: call a doctor if symptoms occur. Eye: flush with water. Hold
eyelids open. Skin: wipe excess off. Wash skin with soap & water or
a waterless hand cleaner followed by soap & water. If material is
injecte d under skin, get medical attention promptly. Do not wait
for symptoms to develop. Inhaled: move to fresh air. Provide oxygen
if needed. Oral: do not induce vomiting. Get medical advice.
Hcc: v6
boiling pt: b.P. Text: n/av
melt/freeze pt: m.P/f.P text: n/av
decomp temp: decomp text: n/av
vapor pres: n/av
vapor density: n/av
spec gravity: n/av
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: amber, smooth grease - slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extreme heat, open flames.
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates & gases will evovle. Carbon monoxide & other
compounds. May form.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in accordance with local state and
federal laws.
Ingred name: polyalphaolefins/1-decene, homopolymer, hydrogenated
cas: 68037-01-4
= wt: 86.
other rec limits: none recommended
ingred name: inorganic clay/bentonite
cas: 1302-78-9
rtecs #: ct9450000
= wt: 6.
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: fatty acid amides
cas: 64754-98-9
= wt: 4.
other rec limits: none recommended
ingred name: other components
= wt: 4.
other rec limits: none recommended
Ld50 lc50 mixture: >5g/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-ingestion: not expected to cause
ill effects. Inhalation: no adverse health effects expected. Eye:
irritation. Skin: not normally expected to cause ill effects.
chronic-prolonged/repeated skin co ntact may cause
irritation,dermatitis.
explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.
effects of overexposure: prolonged or repeated skin contact may cause
skin irritation. Eye contact may cause eye irritation.
medical cond aggravated by exposure: persons with a skin disorder should
avoid prolonged contact when handling or using this product.
First aid: skin: remove contaminated clothing. Wash with soap and water.
get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.
eye : immediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.89
solubility in water: negligible
appearance and odor: red grease, mild odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: fumes,smoke., oxides of carbon,
nitrgen and sulfur.
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
fraction by wt: 01%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3; 9293
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 01%
other rec limits: none specified
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: alkenes, c>10 alpha, polymd.
cas: 68527-08-2
other rec limits: none specified
ingred name: aniline (sara iii)
cas: 62-53-3
rtecs #: bw6650000
other rec limits: none specified
osha pel: s, 5 ppm
acgih tlv: s, 2 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: benzenepropanoic acid,
3,5-bis(1,1-dimethylethyl)-4-hydroxy-,octadecyl ester
cas: 2082-79-3
fraction by wt:
other rec limits: none specified
ingred name: alpha-naphthylamine (sara iii)
cas: 134-32-7
rtecs #: qm1400000
other rec limits: none specified
osha pel: see 1910.1004
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: >80%
other rec limits: none specified
acgih tlv: 5 mg/m3 (oil mist)
ingred name: p,p'-dioctyldiphenylamine
cas: 101-67-7
rtecs #: jj8850000
fraction by wt:
other rec limits: none specified
ingred name: montmorillonite
cas: 1318-93-0
fraction by wt:
other rec limits: none specified
ingred name: 1-naphthaleneamine,n-phenyl
cas: 90-30-2
fraction by wt:
other rec limits: none specified
ingred name: sodium phosphate, tribasic (sara iii)
cas: 7601-54-9
rtecs #: tc9490000
fraction by wt: 0.61%
other rec limits: none specified
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: acetic acid, calcium salt
cas: 62-54-4
fraction by wt:
other rec limits: none specified
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of
eyes,skin,respiratory or g.I.Tracts; chronic: drying of
skin,defatting or dermatitis.
explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: none noted.
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention. Skin:
remov e contaminated clothing. Wash with soapand water. If
irritation persists, get medical advice. Ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
boiling pt: b.P. Text: >350f,>177c
spec gravity: 0.8
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: tan color
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat
hazardous decomposition products: carbon monoxide, carbon dioxide and
other unidentified components.
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic hydrocarbons(diester)_
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: may be mildly irritating.
inhalation: not expected to be a relevant route of exposure; high
temperature vapors irritate respiratory tract. Ingestion: low level
of toxicity. Chronic: skin diso rders.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: may cause eye, skin & respiratory tract
irritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
melt/freeze pt: m.P/f.P text: not given
vapor pres:
vapor density: not given
spec gravity: 0.949
viscosity: 28 cs @40c
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: red grease, mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extreme heat
hazardous decomposition products: carbon monoxide
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
cas: 68037-01-4
fraction by wt: > 80% %
other rec limits: none recommended
ingred name: organophylic clay
cas: 71011-25-1
fraction by wt: < 9% %
other rec limits: none recommended
ingred name: acetic acid, calcium salt
cas: 62-54-4
rtecs #: af7525000
fraction by wt: < 3% %
other rec limits: none recommended
ingred name: benzenepropanoic acid, 3,5-bis
cas: 2082-79-3
fraction by wt: < 2% %
other rec limits: none recommended
ingred name: benzenamine, n-phenyl-
cas: 68411-46-1
fraction by wt: < 2% %
other rec limits: none recommended
ingred name: phenyl-alpha-naphthylamine
cas: 90-30-2
fraction by wt: < 2% %
other rec limits: none recommended
ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
fraction by wt: 1.44% %
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3; 9394
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 1.02% %
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 0.09% %
other rec limits: none recommended
acgih tlv: 5 mg/m3 (oil mist)
ingred name: beta-naphthylamine (sara iii)
cas: 91-59-8
rtecs #: qm2100000
fraction by wt: 0.001% %
other rec limits: none recommended
osha pel: see 1910.1009
acgih tlv: a1; 9394
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: alpha-naphthylamine (sara iii)
cas: 134-32-7
rtecs #: qm1400000
fraction by wt: 0.001% %
other rec limits: none recommended
osha pel: see 1910.1004
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: contact may cause eye
irritation. Release during high pressure usage may result in
injection of grease into the skin causing local necrosis.
inhalation/ingestion: no specific information identi fied. Chronic:
prolonged or repeated exposure may cause dermatitis, folliculitis
or oil acne.
explanation of carcinogenicity: no ingredients of a concentration of
0.1% or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: eyes: redness, tearing, discomfort. Skin:
redness, rash, iching, discomfort.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: in all cases, get medical attention. Inhalation: remove to
fresh air. Provide oxygen if breathing difficult. Eyes: flush with
lots of water for 15 minutes, hold lids open. Skin: remove
contaminated clo thing. Wash with soap & water. Ingestion: do not
induce vomiting. Give nothing by mouth if unconscious.
Hcc: v6
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: amber, smooth, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, open flames and contact with
strong oxidizing agents.
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates and gases will evolve when this material
undegoes pyrolysis.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
cas: 68037-01-4
fraction by wt: 86.0%
ingred name: bentonite(inorganic clay)
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: 6.0%
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: fatty acid amides
cas: 64754-98-9
fraction by wt: 4.0%
ingred name: other components (type not specified)
fraction by wt: 4.0%
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eyes: irritation. Skin: release
during high pressure usage may result in injection of oil into skin
causing local necrosis. Inhalation: not a route of exposure.
ingestion: no specific informati on identified. Chronic: skin:
prolongedor repeated contact may cause dermatitis, folliculitis,
oil acne.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: eyes: irritation. Skin: dermatitis,
folliculitis, oil acne, local necrosis evidenced by onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eyes: flush with large amounts of water. Get medical
attention. Skin: remove contaminated clothing. Wipe excess off.
wash area with soap and water. If irritation persists, get medical
attention. Inhal ation: move to fresh air, give cpr or oxygen if
needed. Get medical attention. Ingestion: do not induce vomiting.
no treatment necessary unless large amounts ingested. However, get
medical attention.
Hcc: v6
solubility in water: insoluble
appearance and odor: brown, smooth, slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat and open flames.
hazardous decomposition products: airborne solids, liquid particulates,
gases, carbon monoxide, unidentified organic compounds evolve
during combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: this product contain a chromium compound. Refer
to the latest epa or local regulations regarding disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 1-decene, homopolymer, hydrogenated
cas: 68037-01-4
fraction by wt: 70-80%
other rec limits: none recommended
ingred name: clay
fraction by wt: 5-10%
other rec limits: none recommended
ingred name: sodium nitrite (cercla)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: sodium chromate (sara 313) (cercla)
cas: 7775-11-3
rtecs #: gb2955000
fraction by wt:
other rec limits: none recommended
osha pel: c 0.1 mg (cro3)/m3
acgih tlv: 0.05 mg(cr)/m3;a1;96
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: dimethylformamide (cercla)
cas: 68-12-2
rtecs #: lq2100000
fraction by wt:
other rec limits: none recommended
osha pel: s, 10 ppm
acgih tlv: s, 10 ppm; 9596
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: other components
fraction by wt: 10-15%
other rec limits: none recommended
Ld50 lc50 mixture: not available.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to the eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, folliculitis or oil
acne. Release during high pressu re usage may result in injection
of grease into the skin causing local necrosis. Inhalation: no
specific information identified. Ingestion: no specific information
identified. This specific product ha s not been tested in
long-term, chronic exposure test. Lubricating greases are generally
considered to be of a low order of acute toxicity to humans and
experimental animals.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by international agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health administrat ion (osha).
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damge a few hours
following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eye contact: flush with water for 15 minutes while holding
eyelids open. Get medical attention. Skin contact: remove
contaminated clothing and wipe excess off. Wash with soap and
water. If irritation persists, get medical attention. If material
is injected under the skin, get medical attention promptly to
prevent serious damage; do not wait for symptoms to develop.
inhalation: remove victim to fre sh air and provide oxygen if
breathing is difficult. Get medical attention. Ingestion: do not
induce vomiting. In general, no treatment is necessary unless large
quantities are ingested. However, get medical advice.
Hcc: v6
nrc/state lic num: not relevant.
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: not provided.
vapor pres: not available
spec gravity: not available
ph: not relevant.
viscosity: not relevant.
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: amber, smooth, slight odor.
percent volatiles by volume: not provided
corrosion rate: not provided.
Stability indicator/materials to avoid: yes
contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates and gases evolve when material undergoes
pyrolysis/combustion. Carbon monoxide and unidentified organic
compounds may be formed upon combustion.
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in complicance with local
regulations..
Ingred name: polyalphaolefins
cas: 68037-01-4
= wt: 86.
other rec limits: not provided.
ingred name: inorganic clay
cas: 1302-78-9
rtecs #: ct9450000
= wt: 6.
other rec limits: not provided.
ingred name: fatty acid amides
cas: 64754-98-9
= wt: 4.
other rec limits: not provided.
ingred name: other components
= wt: 4.
other rec limits: not provided.
Ld50 lc50 mixture: oral, rat ld50: >2000 mg/kg.
health hazards acute and chronic: product assessed in accordance with
osha 29 cfr 1910.1200 and determined not to be hazardous. Effects
of over exposure: no significant effects expected.
effects of overexposure: no significant effects expected.
First aid: eye contact: flush thoroughly with water. If irritation
occurs, call a physician. Skin contact: wash contact areas with
soap and water. High pressure accidental injection through the skin
requires imm ediate medical attention for possible incision,
irrigation and /or debridement. Inhalation: not expected to be a
problem. Ingestion: not expected to be a problem. However, if
greater than 1/2 liter (p int) ingested, immediately give 1 to 2
glasses of water and call a physician, hospital emergency room or
poison control center for assistance. Do not induce vomiting or
give anything by mouth to an un conscious person.
Hcc: v5
boiling pt: >315.6c, 600.F
vapor pres:
spec gravity: 0.946
viscosity: @40c, cst: 28.0,@100c,5.2
solubility in water: negligible
appearance and odor: red grease; mild odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: extreme heat.
hazardous decomposition products: nitrogen oxides. Phosphorus oxides.
carbon monoxide.
conditions to avoid polymerization: will not occur.
Waste disposal methods: product is suitable for burning in an enclosed,
controlled burner for fuel value or disposal by supervised
incineration. Such burning may be limited pursuant to the rcra. In
addition, the product is suitable for processing by an approved
recycling facility or can be disposed of at an appropriate go
vernment waste (contd. See "other precautions")
Ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
minumum % wt: 1.
maxumum % wt: 5.
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3