Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Aircraft And Instrument Grease

NSN: 9150-00-961-8995 | Model: MIL-G-27617 TYP

A synthetic or mineral oil base grease designed for lubrication of antifriction bearings, lightly loaded gears, and on sliding and rolling surfaces of such equipment as instruments, cameras, electronic equipment and aircraft control systems. It is not specially prepared for salt spray resistance but can be used for a wide temperature range. Excludes grease (1), aircraft; and grease (1), instrument.

NSN Properties and Flags
NATO Stock Number
9150-00-961-8995
DEMIL
NO
Basic Ingredient
Gelling agent
Service Characteristics
Corrosion resistive and fuel-oil resistive and water resistant
Quantity Within Each Unit Package
8.000 ounces, avoirdupois
Minimum Dropping Point
450.0 degrees fahrenheit
Effective Tempurature Range Rating
-30.0/+400.0 degrees fahrenheit
Nondefinitive Specification/std Data
Iii type

Inventory Check

The last inventory check on this NSN was done on 11/29/2023. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 662
  • New Surplus: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-961-8995 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • MIL-G-27617 TYP
  • MIL-T-83483
  • KRYTOX 240AC
  • MIL-PRF-27617
  • 656
  • 6195874
  • 25-10M (1LB CAN
  • KRYT0X240AC
  • 6696789
  • KRYTOX 240AC
  • 91363265
  • 91769355
  • KRYTOX 240AC
  • MIL-G-27617
  • BRAYCOTE 806
  • 9150PL0820884
  • 91769356
  • 10126733
Cage Codes:
  • Military Specifications (CAGE 81349)
  • Du Pont E I De Nemours and Co Inc (CAGE 57280)
  • Castrol Industrial North America (CAGE 98308)
  • Naval Sea Systems Command (CAGE 53711)
  • Halocarbon Products Corporation (CAGE 07644)
  • U S Army Aviation and Missile (CAGE 18876)
  • Du Pont E I De Nemours and Co Inc (CAGE 18873)
  • Thales Sa (CAGE F6481)
  • Du Pont E I De Nemours & Co Inc (CAGE 73925)
  • Inspektorat Wsparcia Sil Zbrojnych (CAGE 9009H)
  • Nimikkeistokeskus Ncb Finland (CAGE A486G)
Replacements:
  • 9150-00-961-8995 replaces 9150-00-083-5589
  • 9150-00-961-8995 replaces 9150-00-243-3284
  • 9150-00-961-8995 replaces 9150-00-252-6387
  • 9150-00-961-8995 replaces 9150-00-530-5234
  • 9150-00-961-8995 replaces 9150-00-726-3553
  • 9150-00-961-8995 replaces 9150-01-053-0009
  • 9150-00-961-8995 replaces 9150-01-086-0762
Schedule B & Trade:
  • Schedule B: 2710193750 (NAICS 324110)

    Lubricating greases with or w/out additives

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

ADPE

- Represents items with no adp components

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    090960 - Lubricating grease noi

  • WCC:

    604 - Petroleum, lubricating grease (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • LTL:

    R - 65.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    1
  • Unit of Measure
    Tu
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $210.84 to $351.41..
Does NSN 9150-00-961-8995 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Austria, Finland, Lithuania, Poland, Brazil, Spain, Singapore, Malaysia, Australia, Belgium, Canada, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Netherlands, Portugal, Italy, Norway, Greece, Turkey, and Nato Maintenance and Supply Agency
What is the NIIN of NSN 9150-00-961-8995?
009618995 or 00-961-8995
Does NSN 9150-00-961-8995 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-961-8995?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 01, 1962
MSDS

Material Safety

MSDS BFZHT KRYTOX 240 SERIES FLUORINATED GREASES

Hazards

Ld50 lc50 mixture: oral rat ld50 >25,000 mg/kg
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product may be mildly irritation;
otherwise is practically non-toxic. Decomposition products (formed
above 500f/260c) may cause pilmonary edema,or polymer fume fever.

effects of overexposure: contact may produse mild irritation. Inhalation
of thermal decomposition: respiratory irritation,polymer fume
fever(flu-like symptoms),pulmonary edema.

medical cond aggravated by exposure: none

First Aid

First aid: eyes: flush with water 15 min. Skin: remove contaminated
clothing. Wash area with soap and water. Launder clothing before
reuse. Inhaled: remove from exposure. Give artificial respiration or
oxygen if ne eded. Ingested: do not induce vomiting. Give water or
milk. (nothing by mouth if unconscious) get immediate medical care.

if symptoms persist or are severe,get medical care.

Chemical Properties

Hcc: v6
melt/freeze pt: m.P/f.P text: 608f/320c
spec gravity: 1.89-1.93
ph: neutrl
solubility in water: negligible
appearance and odor: solid,white,waxy grease,no odor.

percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
metal oxides at elevated temperatures.

stability condition to avoid: elevated temperatures (>550f/288c).

hazardous decomposition products: fluorine,fluorine compounds

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state,local,regulations.

do not flush to surface water or drain. Mfr suggests recovery or
incineration.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: perfluoroalkylether
cas: 60164-51-4
fraction by wt: 85.0%
other rec limits: none specified

ingred name: telomers of tetrafluoroethylene
cas: 79070-11-4
fraction by wt: 15.0%
other rec limits: none specified

MSDS BFZHV BRAYCOTE 806

Hazards

Health hazards acute and chronic: irritating to a sensitive individuals.

chronic: same.

First Aid

First aid: eye: flush w/water.Skin: wash w/soap & water.Ingest: do not
induce vomiting,call a physician.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f/260c
vapor pres: 0
solubility in water: negligible
appearance and odor: light cream colored grease

Reactivity

Stability indicator/materials to avoid: yes
lewis acid catalyst such as alcl*3.

stability condition to avoid: temp>400f.When in conta w/aluminum &
titanium
hazardous decomposition products: may induce toxic gases at temp>400f.

Proper Disposal

Waste disposal methods: do not incinerate or burn. Dispose of matl in
compliance w/local,state & fed regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lubricating grease (high temperature)
fraction by wt: 100.0%
other rec limits: not known

MSDS BFZHW TRIBOLUBE 10C; TYPE III

Hazards

Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: acute: none noted by mfr.May irritate
eyes or skin. Chronic: no data available.

effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.

medical cond aggravated by exposure: no data available.

First Aid

First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.

Chemical Properties

Hcc: v6
vapor pres: negligible
spec gravity: 1.9
solubility in water: negligible
appearance and odor: white,buttery grease; no odor

Reactivity

Stability indicator/materials to avoid: yes
strong alkalis, acids.

stability condition to avoid: avoid heating above 250c.

hazardous decomposition products: thermal decomposition will produce hf
& cof*2 & perfluorcrbn

Proper Disposal

Waste disposal methods: sm & lg spill: deposit in a posted toxic
substance landfill in accordance with local, state and federal
regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: pefluoroalkylpolyether (per mfr)
fraction by wt: 65.0%

ingred name: teflon thickener (as gelling agent,per mfr)
fraction by wt: 35.0%

MSDS BFZHX FS-1292 GREASE

Hazards

Ld50 lc50 mixture: ld50(oral rat)=25mg/kg for tfpa
routes of entry: inhalation: no skin: no ingestion: yes
health hazards acute and chronic: acute: eyes: irrit,slight
pain,redness,minor corneal injury;skin: slight irrit;inh: no irrit,no
injury;ing: some injury. Chronic: no known adverse chronic health
effect.

effects of overexposure: see health hazards
medical cond aggravated by exposure: may enhance allergic conditions on
certain people.

First Aid

First aid: eyes: immediately flush with water for 15 minutes;skin: wipe
off and flush w/water;inh: no problem;ing: get medical attention if
large amounts swallowed.

Chemical Properties

Hcc: v6
nrc/state lic num: na
spec gravity: 1.28
solubility in water: negligible
appearance and odor: paste like,some color,very little odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

hazardous decomposition products: fluorine products,sio*2,co*2,and
traces of incompletely burned carbon products.

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: fluorosilicone (molykote fs-1292 grease)
fraction by wt: 100%

MSDS BJKQD TRIBOLUBE-16 GREASE

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is >5,000 mg/kg.

routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: skin (hmis). Acute -
prolonged/repeated skin contact may cause mild irritation in some
individuals. Inhalation of decomposition products formed at high
temperatures above 250c/482f may c ause polymer fever. Very low
toxicity byingestion. Chronic - unknown.

explanation of carcinogenicity: none
effects of overexposure: mild skin irritation
medical cond aggravated by exposure: none

First Aid

First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Eyes: flush with water. Skin: wash with soap & water. Oral: if
conscious, drink large amount of water. Seek medical attention.

Chemical Properties

Hcc: n1
nrc/state lic num: not relevant
melt/freeze pt: >250.C, 482.F
decomp temp: >290.C, 554.F
vapor pres: trace @68f
spec gravity: 1.90
solubility in water: insoluble
appearance and odor: white grease - odorless

Reactivity

Stability indicator/materials to avoid: yes
molten alkali metals, interhalogen compounds, strong or nonaqueous
alkali and lewis acids above 100c/212f
stability condition to avoid: heating above 250c/482f
hazardous decomposition products: toxic fluorine gases

Proper Disposal

Waste disposal methods: incinerate or recycle. Disposal must be in
accordance with local, state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: non-hazardous ingredients
= wt: 100.

other rec limits: none recommended

MSDS BMGYF BRAYCOTE 806

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: health hazards: may be a mild skin
irritant to some people after prolonged exposure. Inhalation of
decomposition products may cause respiratoty irritation and induce
"polymer fume fever" condition.

effects of overexposure: mild skin irritation. Inhale of decomposition
products-lung irritation, pulmonary edema "flu-like symptoms, ex.

fever, chills, etc.

medical cond aggravated by exposure: none known.

First Aid

First aid: eyes-flush with plenty of water. If irritation develops, see
doctor. Skin-wipe material from skin. Wash with soap & water.

remove contaminated clothing. Ingest-do not induce vomiting. Give 2
glasses o f charcoal slurry or water. See doctor.If unconscious
give nothing inhale-remove from exposure. Give oxygen if deemed
necessary.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f decom
vapor pres: 1 x 10-7
spec gravity: 1.9
solubility in water: insoluble
appearance and odor: white colored grease. Odorless.

Reactivity

Stability indicator/materials to avoid: yes
active metals, metal oxides at temperatures > 280c, lewis acid
catalysts, strong or non-aqueous alkali.

stability condition to avoid: open flames
hazardous decomposition products: decomposition at high temperatures
>280c yields hydrogen fluoride, carbonyl fluoride and other acid
fluorides.

Proper Disposal

Waste disposal methods: all recovered material should be packaged,
labeled, transported & disposed of in accordance with good
engineering practices. Dispose of bt method in compliance with
federal, state and local regulatio ns regarding health, air & water
pollution.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: "not hazardous" per manufacturer
fraction by wt: 100%
other rec limits: none specified

MSDS BNRGR RECTORSEAL NO. 15 - THREAD SEALANT FOR GASE

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may produce mild skin and eye
irritation. chronic: massive systemic poisoning may cause liver
damage.

explanation of carcinogenicity: not comment on carginocity by mfr.

effects of overexposure: eyes: irritation. Inhalation: not applicable
ingestion: not expected to produce toxic effects unless large
amounts are ingested.

medical cond aggravated by exposure: supplier did left this field blank.

First Aid

First aid: eyes: flush with waterfor 15 minutes. If irritation persists,
contact physician. Inhalation: not applicable. Ingestion: if large
quantity swallowed, give luke warm water. Do not induce vomiting as
ri sk to lungs exceeds poisoning risk. Obtain medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: decomposes
spec gravity: 1.53
solubility in water: negligible
appearance and odor: black paste/oily odor.

Reactivity

Stability indicator/materials to avoid: yes
strong alkalis.

stability condition to avoid: temperatures above 600f cause rapid
decomposition and hydrogen chloride gas release.

hazardous decomposition products: hydrogen chloride, fragmented short
chain hydrocarbons.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: rcra classified as hazardous waste. Consult
local, state & federal agencies for approved landfills or
controlled incineration facilities.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: trade secret information available from mfr at 713-928-6423
fraction by wt: 80%

MSDS BTHJC RECTORSEAL NO. 15

Hazards

Ld50 lc50 mixture: not given
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged skin exposure may cause
irritation or rash. Eye contact will probably cause irritation.

ingestion may cause nausea or vomiting. Not expected to produce
toxic effects unless large quantities ingested.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

effects of overexposure: skin irritation, rash, eye irritation, nausea,
vomiting.

medical cond aggravated by exposure: pre-exisitng skin conditions may be
aggravated by exposure.

First Aid

First aid: eyes: flush with large amounts of watr for 15 minutes. Seek
immediate medical attention. Skin: wash with soap and water. If
irritation occurs, seek medical attention. Ingestion: give large
quantities of water. Induce vomiting. If unconscious, do not give
anything by mouth or attempt to induce vomiting. Seek immediate
medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: decomposes
melt/freeze pt: m.P/f.P text: not given
vapor pres: not given
vapor density: about 0
spec gravity: 1.6
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: black paste, mild odor

Reactivity

Stability indicator/materials to avoid: yes
contact with aluminum or other active metals at high temperatures,
strong oxidizing and reducing agents.

stability condition to avoid: temperatures in excess of 600f which can
cause rapid decomposition and resultant hydrogen chloride release.

hazardous decomposition products: hydrogen chloride, fragmented
hydrocarbons, carbon monoxide and carbon dioxide

Proper Disposal

Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: chlorinated olefin
fraction by wt: 100% %
other rec limits: none recommended

MSDS BTKSH DOW-CORNING 1292 LONG LIFE BEARING GREASE

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: direct contact may cause
temporary discomfort.Skin: single prolonged exposure should not
cause anu adverse effect.Inhal: no injury is expected from an
exposure of less than 8 hours.Ingest: may cause digestive
discomfort.

explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.

effects of overexposure: eyes: redness and dryness(similar to windburn).

medical cond aggravated by exposure: persons with pre-existing allergies
may be at increased risk from exposure.

First Aid

First aid: skin: remove contaminated clothing;wash with a waterless
cleaner.Eyes: flush with water for 15 minutes.Inhal: no first aid
should be needed.Ingest: no first aid should be needed.

Chemical Properties

Hcc: v6
spec gravity: 1.28
solubility in water: negligible;0.1%
appearance and odor: grease;some color;very little odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: fluorine and chlorine compounds,oxides
of nitrogen and carbon.Trifluoropropionaldehyde when heated >300f.

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: methyl chloroform (1,1,1-trichloroehane) (sara iii)
cas: 71-55-6
rtecs #: kj2975000
fraction by wt: 0.5%
other rec limits: none recommended
osha pel: 350 ppm
acgih tlv: 350 ppm/450stel;9394
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ozone depleting chemical: 1

ingred name: alkyl/fluoroalkyl substitued arylamine diisocyanate
reaction product
fraction by wt: 15%
other rec limits: none recommended

MSDS BVHFR 240 SERIES DRYTOX FLUORINATED GREASES, GRADE:AC (SEE SUPPL)

Hazards

Ld50 lc50 mixture: not established.

routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: mild eye irrit. Skin: irrit.

prolong contact may cause redness & inflamm of hair follicles w/o
skin sensitization. Inhal of decomposition products formed @
290c/554f may cuase lung irrit & pulm ede ma.Inhal of burning
matl/smoke having this matl causes polymer fever, flu-like illness,
chills, cough.

explanation of carcinogenicity: per msds: none of the components in this
matl is listed by iarc/ntp/osha/acgih as carcinogen.

effects of overexposure: eye: discomfort, tearing, blurring of vision.

skin: discomfort, rash. Polymer fume fever does not cause perm
injury and effects are not cumulative.

medical cond aggravated by exposure: none specified by mfg.

First Aid

First aid: inhal: remove to fresh air.Not breath give art resp.Diff
breath give oxy.Call dr. Eye: immed flush w/plenty of water for @
least 15mins.Call dr. Skin: flush w/water after contact. Ingest: do
not induce vo mit.Immed give 2 glasses of water.Nevergive anthing
by mouth to an uncons person.Call dr. Note to physician: may give
5ml/kg (350ml) activated charcoal slurry (50g activated
charcoal/400ml water).

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 320f,160c
spec gravity: 1.89-1.93 @75f
ph: neutra
solubility in water: negligible.

appearance and odor: white, solid, waxy grease, odorless.

Reactivity

Stability indicator/materials to avoid: yes
none reasonably foreseeable.

stability condition to avoid: none specified by mfg. However keep away
from heat and flames to avoid decomposition products.

hazardous decomposition products: decomposition @ flame temps may for
toxic fluorine compounds.

Proper Disposal

Waste disposal methods: treatment/storage/transp/disposal must be in
accordance w/applicable fed/state/provincial/loc regs. Do not flush
to surface water or sanitary sewer system.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: perfluoroalkylether
cas: 60164-51-4
fraction by wt: 85%
other rec limits: none recommended

ingred name: telomers of tetrafluoroethylene
cas: 79070-11-4
fraction by wt: 15%
other rec limits: none recommended

MSDS CCGGR 5660PP KRYTOX 240 AC SERIES & GPL FLUORINATED GREASE

Hazards

Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eyes: may cause mild irritation.

inhalation: smoke/fumes may cause polymer fume fever, a flu-like
condition which occurs several hours after exposure & subsides w/in
24 hours. Overexposure may ca use lung irritation.

explanation of carcinogenicity: none
effects of overexposure: irritation, fever, redness, inflammation of the
hair follicles

First Aid

First aid: inhalation: remove to fresh air. Give cpr/oxygen if
necessary. Skin: flush w/water. Eyes: immediately flush w/plenty of
water for 15 mins. Ingestion: don't induce vomiting. Immediately
give 2 glasses of water/activated charcoal slurry. Never give
anything by mouth if unconscious. Obtain medical attention in all
cases. (see supp)

Chemical Properties

Melt/freeze pt: m.P/f.P text: 608f
spec gravity: 1.89-1.93
ph: 7
solubility in water:
appearance and odor: white solid, waxy grease w/no odor

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: heat & flames

Proper Disposal

Waste disposal methods: treatment, storage, transportation & disposal
must be iaw/local, state & federal regulations. Don't flush to
surface water/sanitary sewer system. Recover nonusable solid, waxy
grease & dispose of in a n approved & permitted incinerator.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: krytox 240
fraction by wt: 85%

ingred name: telomer of tetrafluoroethane
fraction by wt: 15%

MSDS CCJZC KRYTOX 240 SERIES FLUORINATED GREASE,GRADE AA,AB,AC,AD,AZ.

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: contact may cause irrit
w/discomfort or rash.Prol skin contact may cuase redness & inflamm
of hair follicles w/o skin sens.Eye: may cause irrit
w/discomfort,tearing,blurring of vision.Inhal of flu orine
compounds released as decompo prod >290c may cause lung irrit,pulm
edema which require med treatment.(supplement)
explanation of carcinogenicity: per mdsds: none of compo present in matl
@conc equal to or greater than 0.1% listed by iarc/ntp/osha/acgih
as carcinogen.

effects of overexposure: skin irrit w/discomfort or rash.Skin redness &
inflammation of hair follicles w/o skin sens. Eye irrit
w/discomfort, tearing,blurring of vision. Lung irrit, pulm edema,
polymer fume fever, temp flu-li ke illness accompanied by
fever,chills,cough, polymer fume fever may cause lung damage.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: inhal: remove to fresh air.No breath give art resp.Breath
diffi give oxy.Call dr.Skin: flush w/water aft contact.Eye: immed
flush w/pletny of water for @least 15mins.Call dr.Ingest: do not
induce vomit.Im med give 2 glasses of water.Never give anything by
mouth to unconsc person.Call dr.Note to dr: activated charcoal
mix(50g charcoal/400ml water)may be admin,5ml/kg or 350ml for avg
adult.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: np
melt/freeze pt: m.P/f.P text: 608f,320c
decomp temp: decomp text: np
vapor pres: np
vapor density: np
spec gravity: 1.89-1.93 @24c
ph: neutra
viscosity: np
evaporation rate & reference: np
solubility in water: negligible
appearance and odor: odorless, solid,waxy grease, white color.

percent volatiles by volume: np
corrosion rate: np

Reactivity

Stability indicator/materials to avoid: yes
none reasonably foreseeable.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: heating >260-290c may form potentially
toxic fluorine cmpds.Decompo occurs @incr rates as temp raised
>355c.

conditions to avoid polymerization: depolymerization may occur in
presence of some metal oxides @temps >288c.

Proper Disposal

Waste disposal methods: treatment/storage/tramspo/dispo must be in
accordance w/applicable fed/state/provincial/loc regs.Do not flush
to surface water or sanitary sewer system.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: perfluoroalkylether
cas: 60164-51-4
fraction by wt: 73-82%
other rec limits: none recommended

ingred name: polytetrafluoroethylene
cas: 116-14-3
rtecs #: kx4025000
fraction by wt: 18-27%
other rec limits: none recommended

MSDS CKJDK BRAYCOTE 806

Hazards

Ld50 lc50 mixture: no data provided by responsible party.

routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may cause eye irritation. Skin
contact: concentrate may cause skin irritation. Skin absorption: no
acute effects expected. Ingestion: this product may cause
gastrointestinal distress with symptom s of nausea, vomiting,
diarrhea, and abdominal pain. Inhalation: inhalation of
decomposition products (occurs if heated > 300 c) or of smoke from
contaminated tobacco products may cause respiratory ir ritation and
induce polymer fume fever condition. Symptoms of exposure to
decomposition products are: lung irritation, pulmonary edema,
flu-like symptoms (example - fever chills). Chronic: does not sh ow
obvious long term hazard.

explanation of carcinogenicity: no component known to be present in this
product at >0.1% is presently listed as a carcinogen by iarc, ntp
or osha.

effects of overexposure: eye: may cause eye irritation. Skin contact:
concentrate may cause skin irritation. skin absorption: no acute
effects expected. Ingestion: this product may cause
gastrointestinal distress with sym ptoms of nausea, vomiting,
diarrhea, and abdominal pain. inhalation: inhalation of
decomposition products (occurs if heated>300c) or of smoke from
contaminated tobacco products may cause respirator y irritation and
induce polymer fume fever condition.Symptoms of exposure to
decomposition products are: lung irritation, pulmonary edema,
flu-like symptoms (example-fever chills).

medical cond aggravated by exposure: no medical conditions are known to
be aggravated by exposure.

First Aid

First aid: eye: in case of contact, flush eyes with plenty of water. Get
medical attention if irritation occurs. Skin: in case of contact,
wash thoroughly with soap and water. Obtain immediate medical
attention if grease is injected under the skin. Ingestion: do not
induce vomiting. immediately give two glasses of charcoal slurry
or plain water. Do not attempt to give anything by mouth to an
unconscious per son. Contact a physician. inhalation: remove from
exposure area to fresh air immediately. Administer oxygen if deemed
necessary. Polymer fume fever symptoms should subside within 24
hours.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: decomposes
melt/freeze pt: m.P/f.P text: not determined
decomp temp: >260.C, 500.F
vapor pres: 1x10 -7 @ 100f
vapor density: n/d
spec gravity: 1.9000 +/-
viscosity: not available
solubility in water: insoluble
appearance and odor: white colored grease; odorless.

Reactivity

Stability indicator/materials to avoid: yes
active metals, metal oxides at temperatures > 280 c, lewis acid
catalysts, strong or non-aqueous alkali.

stability condition to avoid: none known.

hazardous decomposition products: decomposition at high temperatures
(>200c) yields hydrogen fluoride, carbonyl fluoride, and other acid
fluorides.

Proper Disposal

Waste disposal methods: all recovered material should be packaged,
transported and disposed of (or reclaimed) using good engineering
practices. Disposal method must be in compliance with local, state
and federal regulations regarding health, air and water pollution.

do not burn materials contaminated with this product.

Ingredients List

Ingred name: non-hazardous ingredient(s)
= wt: 100.

other rec limits: not provided
osha pel: not provided
acgih tlv: not provided

MSDS CKRTV CHRISTO-LUBE MCG 111

Hazards


ld50 lc50 mixture: oral ld50 > 5000 mg/kg
route of entry inds - inhalation: no
skin: no
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: none.

explanation of carcinogenicity: non-carcinogenic.

signs and symptions of overexposure: mild irritant to the skin upon prolonged
exposure for some individuals. Decomposition products formed at high
temperatures may cause "polymer fever".

medical cond aggravated by exposure: none known.

Chemical Properties


hcc: n1
melt/freeze pt: >250.C, 482.F
vapor pres: less than 10-3 mm@20c
spec gravity: 1.990
solubility in water: insoluble
appearance and odor: white, odorless.

HAZCOM Label


product id: christo-lube mcg 111
cage: 0jrd3
company name: lubrication technology inc
street: 310 morton st
city: jackson oh
zipcode: 45640
health emergency phone: (740) 286-2644
label required ind: y
date of label review: 08/01/2000
status code: a
year procured: 2000
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: no
health hazard: slight
contact hazard: slight
fire hazard: none

Transportation

=======================================================
responsible party cage: 0jrd3
trans id no: 154285
product id: christo-lube mcg 111
msds prepared date: 11/24/1998
review date: 08/01/2000
mfn: 1
net unit weight: 0.5 lb
multiple kit number: 0
unit of issue: tu
container qty: 1
type of container: tube

Reactivity

=======================================================
disclaimer (provided with this information by the compiling agencies): this
information is formulated for use by elements of the department of defense.

the united states of america in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the department of defense
nor any person or persons contracting with any instrumentality of the united
states of america and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
united states of america should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding department
of defense or other government situation.

Proper Disposal


spill release procedures: use absorbent material to collect and contain for
salvage and disposal.

waste disposal methods: dispose of in accordance with federal, state, and local
regulations.

handling and storage precautions: do not store near flammables or explosive
materials.

other precautions: toxic vapors may be evolved above 290c. Provide adequate
ventilation if product is used above this temperature.

MSDS CKWMC 240AC, KRYTOX 240 SERIES FLUORINATED GREASE

Hazards

Ld50 lc50 mixture: no data provided for product as whole.

reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin contact may cause irritation with
discomfort or rash. Prolonged skin contact may cause redness &
inflammation of the hair follicles without sensitization. Eye
contact may cause eye irritation wit h discomfort, tearing or
blurring of vision. Inhalation of fluorine compounds released as
decomposition products above 290 deg c (554 deg f) may cause lung
irritation & pulmonary edema. Inhalation of fumes or smoke from
overheated or burning grease may cause polymer fume fever, a
temporary flu-like illness accomapnied by fever, chills, & cough
for about 24 hours duration. Repeated episodes of poly mer fume
fever may cause lung damage.

explanation of carcinogenicity: none of the components prestnt in this
material at concentrations equal to or greater than 0.1% are listed
by iarc, ntp, oshs or acgih as a carcinogen.

effects of overexposure: skin irritation with discomfort or rash.

prolonged skin contact may cause redness and inflammation of the
hair follicles. Eye contact may cause irritation with discomfort,
tearing or blurring of visio n. Inhalation may cause lung
irritation, pulmonary edema, polymer fume fever (fever, chills,
cough).

medical cond aggravated by exposure: no data provided by manufacturer

First Aid

First aid: inhalation: if inhaled, remove to fresh air. If not
breathing; give artificial respiration. If breathing is difficult,
give oxygen. Call a physician. Skin contact: flush skin with water
after contact. wash contaminated clothing before reuse. Eye
contact: in case of contact, immediately flush eyes with plenty of
water for at least 15 minutes. Call a physician. Ingestion: if
swallowed, do not induce vomiting. Immediately give 2 glasses of
water. Never gfive anything by mouth to an unconscious person.

Chemical Properties

Hcc: n1
melt/freeze pt: =320.C, 608.F
decomp temp: decomp text: n/p[
spec gravity: 1.89-1.93@ 24 deg c
appearance and odor: odorless solid, waxy grease, white.

Reactivity

Pressure: no.

federal regulatory information: tsca inventory status:
reported/included.

state regulatory information: no data provided by manufacturer

Proper Disposal

Waste disposal methods: treatment, storage, transportation, and disposal
must be in accordance with applicable federal, state/provincial,
and local regulations. Do not flush to surface water or sanitary
sewer system.

Ingredients List

Ingred name: perfluoroalkylether
cas: 60164-51-4
minumum % wt: 73.

maxumum % wt: 82.

other rec limits: 10 mg/m3 t.Dust
osha pel: none established
acgih tlv: none established

ingred name: ptfe
cas: 9002-84-0
rtecs #: kx4025000
minumum % wt: 18.

maxumum % wt: 27.

other rec limits: 10 mg/m3 t. Dust

MSDS CKYZW KRYTOX 240 SERIES FLUORINATED GREASE

Hazards

Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin contact may cause irritation with
discomfort/rash. Prolonged skin contact may cause redness and
inflammation without sensitization. Eye contact may cause
irritation with discomfort, tearing or b lurring of vision.

inhalation of fluorine compounds released as decomposition products
above 290 f may cause lung irrittion and pulmonary edema which
require medical treatment. Fumes or smoke may caus e polymer fume
fever, a temporary flu-like illness accompanied by fever, chills,
and sometimes cough, of approximately 24 hours duration. Repeated
episodes of polymer fume fever may cause lung damage.

explanation of carcinogenicity: none of the components present in this
material at concentrations equal to or greater than 0.1% are listed
by iarc, ntp, osha or acgih as a carcinogen.

effects of overexposure: skin contact may cause irritation with
discomfort/rash. Prolonged skin contact may cause redness and
inflammation. Eye contact may cause irritation with discomfort,
tearing or blurring of vision. Inh alation of fluorine compounds
released as decomposition products above 290 f may cause lung
irrittion and pulmonary edema. Fumes or smoke may cause a temporary
flu-like illness accompanied by fever, c hills, and sometimes
cough, of approximately 24 hours duration.

medical cond aggravated by exposure: not provided

First Aid

First aid: inhalation if inhaled remove to fresh air. If not breathing,
give artificial respiration. If breathing is difficult, give
oxygen. Call a physician. Skin: fluish skin with water after
contact. Wash con taminated clothing before reuse. Eye: in case of
contact, immediately flush eyes with plenty of water for at least
15 minutes. Call a physician. Ingestion: if swallowed, do not
induce vomiting. Immedi ately give 2 glasses of water. Never give
anything by mouth to an unconscious person. Call a physician.

Chemical Properties

Hcc: n1
nrc/state lic num: not relevant
boiling pt: b.P. Text: not provided
melt/freeze pt: =320.C, 608.F
decomp temp: >355.C, 671.F
vapor pres: not provided
spec gravity: 1.89-1.93 @ 24 c
ph: neutral
evaporation rate & reference: not provided
solubility in water: negligible
appearance and odor: white solid, waxy grease, odorless
percent volatiles by volume: not provided
corrosion rate: not provided

Reactivity

Pressure: no.

federal regulatory information: tsca inventory status:
reported/included.

state regulatory information: not provided

Proper Disposal

Waste disposal methods: treatment, storage, transportation, and disposal
must be in accordance with applicable federal, state/provincial,
and local regulations. Do not flush to surface water or sanitary
sewer system.

Ingredients List

Ingred name: perfluoroalkylether
cas: 60164-51-4
minumum % wt: 73.

maxumum % wt: 82.

other rec limits: not provided
osha pel: not provided
acgih tlv: not provided

ingred name: ptfe
cas: 9002-84-0
rtecs #: kx4025000
minumum % wt: 18.

maxumum % wt: 27.

other rec limits: 10 mg/m3 tdust mfr