Home » FSC Catalog » Nuts And Washers » 10116488

Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 5310-00-001-4750
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of 10116488
Item Number Cage
NAS1587-3L 80205
10116488 A486G

Characteristic Codes

10116488 spec. code meanings
Code Translation
AAGR The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
AAUB The length of a straight line which passes through the center of a hole, and terminates at the circumference.
ABMW The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.
ABMX The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
ABMX The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
ABNM A measurement of the smallest dimension of an item, in distinction from length or width.
ADAV A measurement of the longest straight line across a circular cross-sectional plane.
CQBC The maximum rated load in tension applied in a longitudinal direction, per unit of cross-sectional area, that the material can withstand without rupture.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
ZZZK The document designator of the specification or standard which established the item of supply.

10116488

Description: Flat Washer
Mfr. Cage A486G

Specification

Hole Diameter: 3/16", Thickness: 1/64", Overall Diameter: 15/32", steel comp 321 overall or steel comp 348 overall or steel comp 347 overall

AAGR Cross Sectional Shape
Rectangular
AAUB Hole Diameter
From 0.192" and 0.198"
ABMW Edge Shape
Round
ABMX Center Hole Shape
1 round
ABMX Center Hole Shape
Round
ABNM Thickness
0.016 inches
ADAV Overall Diameter
0.469 inches
CQBC Minimum Tensile Strength
75000 pounds per square inch
CSYM Surface Finish
63.0 microinches bottom
CSYM Surface Finish
63.0 microinches top
MATT Material
Steel comp 321 or steel comp 348 or steel comp 347
MDCL Material Spec
Mil-s-6721 mil spec 1st material response and mil-s-6721 mil spec 2nd material response and qq-s-763,cond a fed spec 3rd material response
SFTT Surface Treatment
Passivate
STDC Surface Treatment Spec
Qq-p-35 fed spec single treatment response
ZZZK Specification
80205-nas1587 professional/industrial association standard

Technical Definition

Washer, Flat, also referenced with federal logistics item name code 13393 - A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
National Stock Number (NSN) 5310-00-001-4750

Last Modified: 02/14/2017