Request Pricing & Availability

NSN: 3110-00-001-9669
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Part Numbers

Item Number Item Description
123CM10022-1 Bearing, Ball, Rod End

Master Requirement Codes

Code Translation
AGZA Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
AGYW Indicates the type of seal provided with the bearing.
ABXV The length of a straight line which passes through the center of a circular bore, and terminates at the circumference.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
LMDC The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the lubrication material.
ADZG The element, compound, or mixture with which the item is lubricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
AGYJ The number of seals included on the item.
AHAW Indicates the location of the self-alignment feature.
AAZE The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
AAZF The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
ADGA The overall length of a straight line which passes through the center of an item, and terminates at the outside circumference.
STYL The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

123CM10022-1 Rod End Ball Bearing

Cage 26512

Technical Definition

Bearing, Ball, Rod End, also referenced with federal logistics item name code 00049 - A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.

Technical Characteristics

Alignment Type (AGZA):
Self-aligning
Bearing Seal Type (AGYW):
Contact
Bore Diameter (ABXV):
0.2495 inches minimum and 0.2500 inches maximum
Material (MATT):
Rubber synthetic seal
Material (MATT):
Steel comp e52100 outer ring
Outer Ring Width (AGVT):
0.4640 inches minimum and 0.4740 inches maximum
Inner Ring Width (AGVU):
0.6820 inches minimum and 0.6870 inches maximum
Length From Bore Center To Shank End (AGXH):
2.5000 inches nominal
Lubrication Material Document And Classification (LMDC):
Mil-g-23827 mil spec single material response
Lubrication Material (ADZG):
Grease
Material Document And Classification (MDCL):
66 fed std single material response ball
Material Document And Classification (MDCL):
Mil-s-5000 mil spec single material response rod end body
Seal Quantity (AGYJ):
2
Self-alignment Location (AHAW):
Internal
Self-alignment Angle (CTLK):
10.00 degrees nominal
Shank Bore Depth (AGXK):
1.1100 inches minimum and 1.1400 inches maximum
Shank Bore Diameter (AGXJ):
0.4360 inches minimum and 0.4430 inches maximum
Shank Diameter (AAZE):
0.6230 inches minimum and 0.6250 inches maximum
Shank Style (AAZF):
Hollow
Overall Length (ABHP):
3.0930 inches nominal
Overall Outside Diameter (ADGA):
1.1860 inches nominal
Style Designator (STYL):
Double row, staggered, ball
Surface Treatment Document And Classification (STDC):
Qq-p-416,ty 2 fed spec single treatment response rod end body
Surface Treatment Document And Classification (STDC):
Qq-p-416,ty 1,cl 2 fed spec single treatment response outer ring
Surface Treatment (SFTT):
Cadmium inner ring
Surface Treatment (SFTT):
Cadmium rod end body

National Stock Number (NSN)

3110-00-001-9669