NATO Stock Number
4720-00-169-7426
Sold in multiples of
1 EA
DEMIL
NO
Cross Sectional Shape
Round
Thread Class
3b 2nd end
Thread Class
3b 1st end
Thread Direction
Right-hand 2nd end
Thread Direction
Right-hand 1st end
Inside Diameter
0.602 inches
Tempurature Rating
-65.0 degrees fahrenheit single response and 400.0 degrees fahrenheit single response
Tempurature Rating
-65.0 degrees fahrenheit and 400.0 degrees fahrenheit single response
Outside Diameter
1.140 inches
Minimum Inside Bending Radius
7.750 inches
Hose Or Tubing Specification/std Data
Mil-h-38360, size 12 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Connection Style
Swivel nut flare 1st end
Connection Style
Swivel nut flare 2nd end
End Connection Design
Elbow 2nd end
End Connection Design
Straight 1st end
End Fitting Component And Material
Complete fitting stainless steel all ends
Fitting Component And Surface Treatment
Complete fitting passivate 1st end
Connection Type
Threaded internal tube 2nd end
Connection Type
Threaded internal tube 1st end
Features Provided
Electrostatic discharge capability and nuts drilled for lockwire
Thready Qty Per Inch (tpi)
16 1st end
Thready Qty Per Inch (tpi)
16 2nd end
Second End Relationship With First End
Not identical
Burst Test Pressure
12000.0 pounds per square inch
First End Swivel Action Capability
Not included
Layer Composition And Location
1st layer braided corrosion resistant steel wire
Layer Composition And Location
2nd layer spirally wrapped corrosion resistant steel fabric
Layer Composition And Location
3rd layer spirally wrapped corrosion resistant steel fabric
Layer Composition And Location
4th layer spirally wrapped corrosion resistant steel fabric
Layer Composition And Location
5th layer spirally wrapped corrosion resistant steel fabric
Layer Composition And Location
Outer layer braided corrosion resistant steel wire
Maximum Operating Pressure
3000.0 pounds per square inch
Thread Size
1.000 inches 1st end
Thread Size
1.000 inches 2nd end
Seat Angle
37.0 degrees 1st end
Seat Angle
37.0 degrees 2nd end
Hydrostatic Test Pressure
6000.0 pounds per square inch
Flow Angle
90.0 degrees 2nd end
Outer Covering Environmental Protection
Corrosion resistant
Inside Surface Condition
Smooth
Measuring Method And Length
37.500 inches working
Second End Swivel Action Capability
Not included
Supplementary Features
This item has been reviewed for asbestos material. The current approved source, 50599, has indicated their part number contained asbestos prior to 1984. They continue to manufacture the same part number without asbestos material after 1984
Thread Series Designator
Un 1st end
Thread Series Designator
Un 2nd end
Specification Data
Mil-h-38360, size 12 professional/industrial association specification
