Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 3040-00-001-2067
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of 164b8125p1
Item Number Cage
164B8125P1 89954

Characteristic Codes

164B8125P1 spec. code meanings
Code Translation
AAGZ The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.
AAHN A term used to identify the ends as identical or not identical.
AAHP The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
AMCX A measurement of the longest dimension of the flat at the first end, in distinction from width.
AMDL The length of a straight line which passes through the center of the first end, and terminates at the circumference.
AMFZ The length of a straight line which passes through the center of the second end, and terminates at the circumference.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.
FEAT Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.

164B8125P1

Description: Straight Shaft
Mfr. Cage 89954

Specification

Length: 1-45/64", steel

AAGZ First End Style
Flatted
AAHN End Similarity
Not identical
AAHP Second End Style
Circular grooved
AAHW Second End Groove Width
0.0200 inches
AAHX Second End Groove Diameter
0.1150 inches
ABHP Overall Length
1.700 inches
AMCW First End Flat Depth
0.0300 inches
AMCX First End Flat Length
0.250 inches
AMDL First End Diameter
0.1250 inches
AMFQ Second End Distance From End To Groove
0.030 inches
AMFZ Second End Diameter
0.1250 inches
CSYM Surface Finish
63.0 microinches
FEAT Special Features
Surface treatment passivated
MATT Material
Steel

Technical Definition

Shaft, Straight, also referenced with federal logistics item name code 22109 - A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
National Stock Number (NSN): 3040-00-001-2067

Last Modified: 02/14/2017