Item Number | Cage |
---|---|
2C8140-4 | 99240 |
Code | Translation |
---|---|
AAJD | A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread. |
AAJF | The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction. |
ADQU | The part that controls the flow through the item. |
ADSU | The means of closing the item when inlet pressure decreases. |
AHNC | The style designation indicating the configuration that most nearly corresponds to the appearance of the connection. |
AQLR | The means used to control the operation of the valve. |
AWLS | Indicates the type of connection/s/. |
AZGM | The facility for mounting the item. |
BBJX | The installed position for which the item is designed. |
CMLP | The number of threads on the item per linear inch measured on a line parallel to the thread axis. |
CQGM | The maximum pressure at which the item is rated for operation. |
CQJX | A designation that is used for the purpose of general identification of the thread. |
CQRB | The angle of the end surface upon which the mated surface seats. |
CWFD | The nominal length of a straight line which passes through the center of the accommodated tube, and terminates at the outside circumference. |
MATT | The chemical compound or mechanical mixture properties of which the item is fabricated. |
MATT | The chemical compound or mechanical mixture properties of which the item is fabricated. |
MDCL | The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material. |
MDCL | The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material. |
MEDA | The type of media for which the item is designed. |
SFTT | The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off. |
STDC | The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material. |
STYL | The style designation indicating the configuration that most nearly corresponds to the appearance of the item. |
THSD | A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter. |
Thread Size: 7/16", aluminum alloy seat
Last Modified: 02/14/2017