Home » FSC Catalog » Nuts And Washers » 32-411757-3

Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 5310-00-001-4654
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of 32-411757-3
Item Number Cage
32-411757-3 76301

Characteristic Codes

32-411757-3 spec. code meanings
Code Translation
AAUB The length of a straight line which passes through the center of a hole, and terminates at the circumference.
AAVH The length of a straight line which passes through the center of a shoulder, and terminates at the circumference.
ABKV The length of a straight line which passes through the center of a circular figure or body, and terminates at the outside circumference.
ABPX A measurement of the smallest dimension of the material, in distinction from length or width.
CQBC The maximum rated load in tension applied in a longitudinal direction, per unit of cross-sectional area, that the material can withstand without rupture.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
STYL The style designation indicating the configuration that most nearly corresponds to the appearance of the item.


Description: Shouldered Washer
Mfr. Cage 76301


Hole Diameter: 29/64", steel overall

AAUB Hole Diameter
0.453 inches
AAVH Shoulder Diameter
0.641 inches
ABKV Outside Diameter
1.250 inches
ABMG Shoulder Height
From 0.056" and 0.066"
ABPX Material Thickness
0.064 inches
CQBC Minimum Tensile Strength
125000 pounds per square inch
MATT Material
MDCL Material Spec
Ams 6370 assn std single material response
SFTT Surface Treatment
STYL Style Designator

Technical Definition

Washer, Shouldered, also referenced with federal logistics item name code 15934 - A washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.
National Stock Number (NSN): 5310-00-001-4654

Last Modified: 02/14/2017