NATO Stock Number
3405-00-294-9591
Sold in multiples of
1 EA
DEMIL
NO
Mounting Type
Floor
Current Type
Ac
Frequency Rating
60.000 hertz
Accessory Components And Quantity
Aluminum oxide abrasive band, 1 in. W, 12 ea, no. 50, no. 80, no. 150; saw blade guide adapter set, 90 degrees 1; drive belt set 1; flexible back conventional tooth set, band saw blade, raker set, 100 ft coils per ggg-b-421, type 1, style 1, 8 coils 0.025 in. Thk, w in in. And teeth as follows 1/8 14, 1/8 18, 1/8 24, 1/4 10, 1/4 18, 1/4 24, 1/2 6, 1/2 10, 2 coils 0.032 in. Thk, 3/4 10; skip tooth flexible back band saw blade, 100 ft coils per ggg-b-421, type 1, style 2, 2 coils 0.025 in. Thk, w in in. And teeth as follows 1/4 6, 1/2 4, 1 coil 0.032 in. Thk, 3/4 3; 1 pump and chip blower, 1 circle cutting attachment; 1 cut off-mitre attachment; med cut flat bastard file bands 1 ea 1/4 in. W, 1/2 in. W; oval bastard file band med cut 1/4 in. W bands 1 set; file band guides 1 set ea for 1/4 in. 1/2 in. W bands; 1 set roller back-up bearing for 1/2, 3/16, 1/4, 3/8, 1/2, 3/4 in. W/blades; 1 holding jaw; 1 shielded table light; 1 etching pencil; 1 rip fence
Frame Type
Rigid
Voltage Rating
208.000 volts
Feed Method
Work into cutting band
Rotational Speed Rating In Rpm
Any acceptable
Horsepower Rating
1.500
Throat Depth
15.250 inches
Braking Facility
Not included
Drive Method
Electric motor
Table Length
24.000 inches
Table Width
24.000 inches
Electric Motor Quantity
1
Table Type
Tilting
Table Right Tilt Angle In Deg
45.0
Table Left Tilt Angle In Deg
10.0
Band Type For Which Designed
File or saw blade
File Maximum Length Accommodated
Any acceptable
File Maximum Width Accommodated
0.500 inches
Blade Maximum Length Accommodated
Any acceptable
Blade Maximum Width Accommodated
0.750 inches
Vise
Not provided
Distance Between Guide And Table
12.000 inches
Cutting Speed Range
+50.0/+5200.0 feet per minute
Cutting Speed Range
+50.0 to 5200.0 feet per minute
Infinite Cutting Speed Feature
Provided
Power Feed Feature
Provided
Built-in Coolant System
Not included
Integral Butt Welder
Included
Integral Grinder
Included
Phase
Three
Nondefinitive Specification/std Data
16 size
Departure From Cited Designator
As modified by voltage rating
