Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 5315-00-001-5335
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of 35613
Item Number Cage
35613 94697

Characteristic Codes

35613 spec. code meanings
Code Translation
AAGZ The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.
ABRB The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.
ABRF The center to center distance between holes on the item.
ACHT The overall dimension measured along the longitudinal axis, with terminated points at the extreme ends of the pin.
ACHU The overall length of a straight line which passes through the center of the pin, and terminates at the outside circumference.
CQBB Indicates whether or not the second end is identical to the first end.
CQFM A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.

35613

Description: Headless Straight Pin
Mfr. Cage 94697

Specification

steel comp 416 overall

AAGZ First End Style
Chamfered
ABRB Hole Arrangement Style
Both end drilled
ABRC First Hole Diameter
From 0.045" and 0.050"
ABRD Second Hole Diameter
From 0.045" and 0.050"
ABRE Distance From Centerline Of Hole To End Of Pin
0.050 inches
ABRF Center To Center Distance Between Holes
From 0.460" and 0.470"
ACHT Pin Overall Length
From 0.570" and 0.580"
ACHU Pin Overall Diameter
From 0.1970" and 0.1972"
AMCS First End Taper Length
0.020 inches
CQBB Second End Relationship With First End
Identical
CQFM Hardness Rating
40.0 rockwell c minimum and 45.0 rockwell c maximum
CRMG First End Taper Angle
45.0 degrees
CSYM Surface Finish
125.0 microinches both ends
CSYM Surface Finish
16.0 microinches outside diameter
MATT Material
Steel comp 416
MDCL Material Spec
Qq-s-764,type 416 fed spec single material response
SFTT Surface Treatment
Passivate
STDC Surface Treatment Spec
Wps10012,79294 mfr ref single treatment response

Technical Definition

Pin, Straight, Headless, also referenced with federal logistics item name code 02390 - A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod, straight, headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin, straight, threaded.
National Stock Number (NSN) 5315-00-001-5335

Last Modified: 02/14/2017