Request Pricing & Availability

NSN: 5315-00-001-9478
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Part Numbers

Item Number Item Description
2122700-14 Pin, Grooved, Headless
2122700PC14 Pin, Grooved, Headless
2122702-14 Pin, Grooved, Headless
5599404-5 Pin, Grooved, Headless

Master Requirement Codes

Code Translation
ABNZ A measurement of the longest effective dimension of an item.
ABMZ The length of a straight line which passes through the center of a circular figure or body, and terminates at the circumference.
CRDY Indicates the location of the first end.
AAGZ The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.
CQFM A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
CQBB Indicates whether or not the second end is identical to the first end.
FEAT Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
STYL The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

5599404-5 Headless Grooved Pin

Cage 53711

Technical Definition

Pin, Grooved, Headless, also referenced with federal logistics item name code 02386 - A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). its length must not exceed 12 inches (304 mm). excludes rod, grooved, headless; shaft (as modified); and pin, vehicular leaf spring shackle.

Technical Characteristics

Effective Length (ABNZ):
0.257 inches nominal
Diameter (ABMZ):
0.2501 inches minimum and 0.2503 inches maximum
First End Location (CRDY):
Both ends
First End Style (AAGZ):
Chamfered w/thru hole
First End Taper Angle (CRMG):
10.0 degrees minimum and 15.0 degrees maximum
First End Taper Length (AMCS):
0.016 inches nominal
Hardness Rating (CQFM):
30.0 rockwell c minimum overall and 35.0 rockwell c maximum overall
Material (MATT):
Steel comp 4130h overall
Overall Length (ABHP):
0.500 inches nominal
Material Document And Classification (MDCL):
Aisi assn std single material response overall
Second End Relationship With First End (CQBB):
Identical
Special Features (FEAT):
Thru hole thd on both ends 4-40 unc 2b 0.112 in. min lg,with retaining ring
Style Designator (STYL):
Groove
Surface Finish (CSYM):
32.0 microinches outside diameter
Surface Treatment Document And Classification (STDC):
Mil-p-16232,ty m,cl 1 mil spec single treatment response overall
Surface Treatment (SFTT):
Phosphate overall
Undercut Diameter (ABPA):
0.1729 inches minimum and 0.1739 inches maximum
Undercut Width (ABPC):
0.047 inches minimum and 0.051 inches maximum

National Stock Number (NSN)

5315-00-001-9478