Home » FSC Catalog » Nuts And Washers » 570163-60

Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 5310-00-001-2035
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of 570163-60
Item Number Cage
4027748 6N299
570163-60 89305

Characteristic Codes

570163-60 spec. code meanings
Code Translation
AAGR The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
AAUB The length of a straight line which passes through the center of a hole, and terminates at the circumference.
ABMW The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.
ABMX The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
ABMX The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
ABNM A measurement of the smallest dimension of an item, in distinction from length or width.
ADAV A measurement of the longest straight line across a circular cross-sectional plane.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.

570163-60

Description: Flat Washer
Mfr. Cage 89305

Specification

Hole Diameter: 25/64", Thickness: 1/16", Overall Diameter: 9/16", steel overall

AAGR Cross Sectional Shape
Rectangular
AAUB Hole Diameter
From 0.380" and 0.385"
ABMW Edge Shape
Round
ABMX Center Hole Shape
1 round
ABMX Center Hole Shape
Round
ABNM Thickness
From 0.055" and 0.065"
ADAV Overall Diameter
From 0.557" and 0.567"
MATT Material
Steel

Technical Definition

Washer, Flat, also referenced with federal logistics item name code 13393 - A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
National Stock Number (NSN) 5310-00-001-2035

Last Modified: 02/14/2017