Cross Reference

These part numbers have the same form, fit, and function of 5710-3-7p

Item Number	Cage
5710-3-7P	86928
911625-3	06481
5710-3	86928

Characteristic Codes

5710-3-7P spec. code meanings

Code	Translation
AAGR	The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
AAUB	The length of a straight line which passes through the center of a hole, and terminates at the circumference.
ABMW	The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.
ABMX	The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
ABMX	The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
ABNM	A measurement of the smallest dimension of an item, in distinction from length or width.
ADAV	A measurement of the longest straight line across a circular cross-sectional plane.
MATT	The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL	The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
SFTT	The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
STDC	The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.

Specification

Hole Diameter: 1/16", Thickness: ", Overall Diameter: 7/64", steel comp 302 overall

Technical Definition

Washer, Flat, also referenced with federal logistics item name code 13393 - A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.