Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Transmitter Synchro

Model / MPN: 59 000-13 | NSN: 5990-00-206-3753
ITAR Registered seal

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.

Product Details
NATO Stock Number
5990-00-206-3753
Sold in multiples of
1 EA
DEMIL
NO
Body Material
Steel, stainless
Body Style
Standard round c
Shoulder Diameter
Between 0.9995 inches and 1.0000 inches
Pilot Diameter
Between 0.6245 inches and 0.6250 inches
Overall Length
Between 2.3360 inches and 2.3760 inches
Flange Diameter
Between 1.0570 inches and 1.0620 inches
Flange Thickness
0.0930 inches
Undercut Diameter
0.9750 inches
Undercut Width
0.0620 inches
Shaft Diameter
0.1198 inches single shaft and 0.1200 inches single shaft
Shaft Length
0.5460 inches single shaft and 0.5650 inches single shaft
Fragility Factor
Moderately rugged
Maximum Tempurature Rise
20.0 degrees celsius
Securing Hole Quantity
4
Body Size
11
Rotor Input Voltage Rating In Volts
115.0
Frequency In Hertz
400.0
Rotor Input Current Rating
31.0 milliamperes
Rotor Input Electrical Power Rating
490.0 milliwatts
Zro Resistance In Ohms
Between 3720.00 and 4700.00
Zss Resistance In Ohms
Between 410.00 and 500.00
Zro Impedance Magnitude In Ohms
Between 80.00 and 84.00
Zss Impedance Magnitude In Ohms
Between 17.00 and 26.00
Phase Shift Angle In Deg
4.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
45.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
75.00
Electrical Error Angular Range In Minutes
-7.0/+7.0
Actuator Friction Torque At Minus 55 Deg Celsius
0.07 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius
0.07 inch-ounces
Pilot Length
Between 0.0450 inches and 0.0650 inches
Shoulder Length
Between 0.0590 inches and 0.0790 inches
Mounting Surface To Terminal End Distance
Between 1.7910 inches and 1.8110 inches
Mounting Facility Screw Thread Series Designator
Unc
Terminal Location
Rear
Shaft Slot Depth
0.0250 inches single shaft
Shaft Slot Width
0.0200 inches single shaft
Shaft Type
Round, slotted single shaft
Alignment Hole Depth
0.1250 inches
Mounting Facility Screw Thread Diameter
0.112 inches
Transformation Ratio
0.783 rotor to stator
Alignment Hole Bolt Circle Diameter
0.6250 inches
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
5 screw

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping
59 000-13 Cross Reference
  • M20708/2-05E
  • VCX11-4G1
  • 11CX4E
  • 11CX4E
  • AS20708/2
  • 11CX4E
  • 1.791521
  • 011-702M1
  • 011-702M1
  • M20708/2C-005
  • M20708/2-005
  • MIL-S-20708/2