Price and Stock Check

We will send you instructions on purchasing this NSN*
NSN: 3040-00-001-2320
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Cross Reference

These part numbers have the same form, fit, and function of 659194
Item Number Cage
659194 05234

Characteristic Codes

659194 spec. code meanings
Code Translation
AAGZ The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.
AAHN A term used to identify the ends as identical or not identical.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
AMDL The length of a straight line which passes through the center of the first end, and terminates at the circumference.
CSYM Designates the specific surface roughness rating, representing the arithmetic average deviation of the surface from the meanline in profile.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.

659194

Description: Straight Shaft
Mfr. Cage 05234

Specification

Length: 2-13/16", steel

AAGZ First End Style
Circular grooved
AAHG First End Groove Width
0.0400 inches
AAHH First End Groove Diameter
0.1250 inches
AAHN End Similarity
Identical
ABHP Overall Length
2.810 inches
AMCY First End Distance From End To Groove
0.062 inches
AMDL First End Diameter
From 0.1860" and 0.1900"
CSYM Surface Finish
63.0 microinches
MATT Material
Steel
MDCL Material Spec
Qq-s-763 fed spec single material response

Technical Definition

Shaft, Straight, also referenced with federal logistics item name code 22109 - A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
National Stock Number (NSN): 3040-00-001-2320

Last Modified: 02/14/2017