Request Pricing & Availability

NSN: 5306-00-001-8214
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

Cross Reference These part numbers have the same form, fit, and function of 69038-16-57

Item Number Cage
69038-16-57 56878

Characteristic Codes 69038-16-57 spec. code meanings

Code Translation
CRZS The distance from the shank hole centerline to the largest bearing surface of the head.
AASB The dimension, measured along a line parallel to the longitudinal axis, from the largest bearing surface of the fastener head to the extreme opposite end, or as specifically designated for other type fasteners.
AAUR The length of a straight line which passes through the center of the grip, and terminates at the circumference.
ANEE A measurement of the longest dimension of the grip, in distinction from width.
AASU A measurement from the bottom to the top of the head, in distinction from depth.
AASK The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
AHYM The nominal length of a straight line which passes through the center of the threaded portion, and terminates at the circumference.
AAWB The length of a straight line which passes through the center of the shank unthreaded hole, and terminates at the inside circumference.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
AAJD A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
AAJF The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
AASA A measurement of the extent of threads, including incomplete threads, along a line parallel to the longitudinal axis.
CMLP The number of threads on the item per linear inch measured on a line parallel to the thread axis.
THSD A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

69038-16-57 Shear Bolt

Mfr. Cage 56878


Fastener Length: 3-35/64", Grip Length: 2-51/64", steel comp h11 overall Thread: 1-1/64-12, Thread Length: 3/4"

CRZS Distance From Head Largest Bearing Surface To Shank Hole Center
3.413 inches minimum first hole and 3.433 inches maximum first hole
AASB Fastener Length
From 3.546" and 3.593"
AAUR Grip Diameter
From 0.9980" and 0.9990"
ANEE Grip Length
From 2.782" and 2.802"
AASU Head Height
0.539 inches
AASK Head Style
Double hexagon
MATT Material
Steel comp h11
AHYM Nominal Thread Diameter
1.000 inches
AAWB Shank Unthreaded Hole Diameter
0.141 inches first hole
AATB Width Between Flats
From 1.427" and 1.440"
SFTT Surface Treatment
Nickel and cadmium or chromate
AAJD Thread Class
AAJF Thread Direction
AASA Thread Length
From 0.744" and 0.811"
CMLP Thready Qty Per Inch (tpi)
THSD Thread Series Designator

Technical Definition

Bolt, Shear, also referenced with federal logistics item name code 15903 - A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.
National Stock Number (NSN) 5306-00-001-8214

Last Modified: 02/14/2017