Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Control Transformer Synchro

Model / MPN: 7676357 | NSN: 5990-00-847-3806
ITAR Registered seal

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

Product Details
NATO Stock Number
5990-00-847-3806
Sold in multiples of
1 EA
DEMIL
DEMIL/MLI
Body Material
Steel, stainless
Body Style
Standard round d
Shoulder Diameter
Between 1.9850 inches and 1.9900 inches
Pilot Diameter
Between 0.5900 inches and 0.6000 inches
Second Shoulder Diameter
Between 1.9985 inches and 1.9995 inches
Second Shoulder Length
Between 0.1680 inches and 0.1700 inches
Overall Length
4.2940 inches
Flange Diameter
Between 2.2490 inches and 2.2500 inches
Flange Thickness
Between 0.2480 inches and 0.2500 inches
Body Diameter
Between 1.9850 inches and 1.9900 inches
Shaft Diameter
0.2402 inches single shaft and 0.2405 inches single shaft
Shaft Length
0.7190 inches single shaft
Fragility Factor
Moderately rugged
Maximum Tempurature Rise
45.0 degrees celsius
Body Size
23
Stator Input Voltage Rating In Volts
90.0
Stator Input Current Rating
20.0 milliamperes
Stator Input Electrical Power Rating
500.0 milliwatts
Frequency In Hertz
60.0
Zro Resistance In Ohms
1015.00
Zso Resistance In Ohms
492.00
Zrs Resistance In Ohms
239.00
Maximum Fundamental Null Voltage In Millivolts Per Volt
60.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
75.00
Electrical Error Angular Range In Minutes
-6.0/+6.0
Spline Tooth Quantity
22 single shaft
Actuator Friction Torque At Minus 55 Deg Celsius
0.50 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius
0.20 inch-ounces
Alignment Hole Quantity
3
Pilot Length
Between 0.0360 inches and 0.0460 inches
Shoulder Length
0.2500 inches
Aft Of First Flange Diameter
Between 1.9985 inches and 1.9995 inches
Mounting Surface To Terminal End Distance
3.4450 inches
Spline Tooth Diametral Pitch
96 single shaft
Shaft Thread Series Designator
Unf single shaft
Shaft Thread Direction
Right-hand single shaft
Shaft Thread Class
2a
Terminal Location
Rear
Shaft Thread Length
0.2660 inches single shaft
Plus J Zro Reactance In Ohms
2746.00
Plus J Zso Reactance In Ohms
4027.00
Plus J Zrs Reactance In Ohms
81.00
Shaft Type
Spline w/threads single shaft
Alignment Hole Depth
0.1250 inches
Transformation Ratio
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter
1.6420 inches
Shaft Thread Size
0.250 inches single shaft
Test Data Document
81349-mil-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
5 screw
Specification Data
81349-mil-s-20708/94 government specification

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping
7676357 Cross Reference
  • AS20708/94
  • 7406453P4
  • VCT23/36-6A
  • AY240AA 10 A1
  • 23CT6
  • A10630
  • 23CT6
  • 23CT6