NATO Stock Number
2520-00-352-6882
Sold in multiples of
DEMIL
NO
General Description
Steel, 20.625 in. Lg, 1.000 in. Od, 1st end of shaft ground down on each side to form 0.495 in. Thk flat surface, 1.125 in. Flat lg, one 0.500 in. Diameter hole through flat, hole centered and spaced 0.500 in. From hole center to outer end, 0.250 in. By 45 degrees chanfer at outer corners of flat, 5 rounded niches along side of shaft, spacing from niche centers to flat end are, 5.344 in., 6.000in., 6.656 in., 8.313 in., and 19.000 in., first four niches in line and parallel with edge of flat, last nitche 90 degrees from first four and parallel with face of flat, other end plain